Lenovo Dynamic System Analysis (DSA) (For AnyOS)

Change History

Dynamic System Analysis (DSA) Preboot Change History
Version 10.8, BUILD ID DSALB6S
o New System Support:
o New Operating System support:
o Problem(s) Fixed:
    1. modify LUF code due to changes in LUF API
    2. fix a libcurl error when used with proxy
o Enhancement:
o Limitations:
o Special usage:

Version 10.8, BUILD ID DSALB6R
o New System Support:
o New Operating System support:
o Problem(s) Fixed:
    1. LXCA 2.7.0 firmware update problems with UXSP 8
    2. EventID Hyperlinks cannot click in normally
o Enhancement:
o Limitations:
o Special usage:

Version 10.7, BUILD ID DSALB6P
o New System Support:
o New Operating System support:
o Problem(s) Fixed:
    1. pDSA Install activation key from lenovo website failed in PDSA GUI model
o Enhancement:
o Limitations:
o Special usage:

Version 10.6, BUILD ID DSALB6O
o New System Support:
o New Operating System support:
o Problem(s) Fixed:
    1. pDSA Failed to upload DSA Inventory and Diagnostic log to Lenovo server
    2. pDSA GUI Activation Key Management Interface prompt message is wrong
    3. pDSA GUI install activation key from Lenovo website failed without prompt message   
    4. Reconfigure network interface in case the default interface could not connect to IMM  
    5. pDSA can't boot into BMU mode when LXCA set Bare Metal Update with delay activation

o Enhancement:
o Limitations:
o Special usage:

Dynamic System Analysis (DSA) Preboot Change History
Version 10.5, BUILD ID DSALB6F
o New System Support:
o New Operating System support:
o Problem(s) Fixed:
    1. pDSA GUI hangs after run collect system information and upload to Lenovo then run inventory again
    2. pDSA reports "Fail to get activation key list”
o Enhancement:
    1.Update Embedded Linux OS from RHEL6.5 to RHEL7.6 
    2.Update FireFox to v60.6.1
    3.Replace XPCOM with web-extension
o Limitations:
    1. There is no monitor information in Hardware Inventory page when there is external monitor connected to the server.
    2. There is no monitor device information in the Merged Device page.
    3. Due to the RHEL7.6 OS limitation, Preboot DSA 10.5 can't recognized the tape information when it is connected to server via SAS interface.
    4. The Fusion-IO adapter is not supported by preboot DSA 10.5 due to embedded Linux OS size limitation. 
    5. Preboot DSA 10.5 does not support Brocade fc adapter inventory/diags due to there is no brocade fc device driver on RHEL7.6.
o Special usage:

Version 10.4, Build ID DSALB2R
o New System Support:
o New Operating System support:
o Problem(s) Fixed:
o Enhancement:
    1.Updated the TrustList.pem file.
o Limitations:
o Special usage:

Version 10.3, Build ID DSALB2P
o New System Support:
o New Operating System support:
o Problem(s) Fixed:
o Enhancement:
    1.Updated the TrustList.pem file.
o Limitations:
o Special usage:

Version 10.3, Build ID DSALB2N
o New System Support:
o New Operating System support:
o Problem(s) Fixed:
    1.Fixed Bug 129308 - BMU environment not available.
    The fix way is that modify start_mcp.sh scritpt to change the connection by usb lan 0 to usb lan 1.
    2.Resolved PSIRT #11554: SECURITY: dhcp CVE-2018-5732 CVE-2018-5733.
o Enhancement:
    1.Updated openssl 1.0.2k -> 1.0.2n.
    2. Added extlib_version.log for tracking update status of extlibs.
o Limitations:
o Special usage:

Version 10.2, Build ID DSALA8N
o New System Support:
    StorSelect C1(5120)
    StorSelect D1(5135)
    StorSelect N1(5128)
o New Operating System support:
o Problem(s) Fixed:
    1.Fix Bug 61595 - [201611][TDC-LXCA][Newport]Use LXCA update the X880 server's FW, the job display succeed in fact some options didn't update. 
    The fix way is that upgrade LSI raid driver from v00.00.06.12 to v6.808.16.00 in MCP.
    2.Fix Bug 65710 - [Riesling_Phase2a_XinYi_DaAn_pDSA_Red] Show warning sign of system information in GUI mode.
    3.Fix Bug 66727 - [PA-SIT][X3650 M5 v4][Service] Pre-Dynamic System Analysis (PDSA) cannot detect local HDD information.
    The fix way is that upgrade LSI ServeRAID M1215 and LSI MegaRAID SAS driver in MCP.
    4.Part Fix Bug 64863 - [OS_Block][WST_pDSA] Diagnostic test missing Lan Card test item. 
    Part fixed: fixed the Diagnostic test missing for Broadcom NX1 card by update Broadcom Cim Provider.
    And the problem of Broadcom NX2 card will be tracking by the new bug 72117( Bug 72117 - Diagnostic test missing Lan Card test item for Broadcom NX2 card.).
    5.Add a boot config "scsi_mod.scan=async" in MCP7.41.28
o Enhancement:
o Limitations:
o Special usage:
  - 2016 NOV Block
  
Version 10.2, Build ID DSALA8K
o New System Support: 
o New Operating System support:
o Problem(s) Fixed:
    Xclarity can't update "Intel x710_ 2FORT-81Y3520" or "Intel x710_2Fort- 01DA902" Card FW and occured
    "Stopped with Error" at "Intel Adpate" Update Process Step. 
o Enhancement:
o Limitations:
o Special usage:
  - 2016 OS Block

Version 10.2, Build ID DSALA8I
o New System Support: 
o New Operating System support:
o Problem(s) Fixed:
o Enhancement:
o Limitations:
o Special usage:
  - 2016 MayBlock

Version 10.2, Build ID DSALA8E
o New System Support:
    System x3500 M5(5478)
    System x3650 M5(8871)
    System x3550 M5(8869)
o Problem(s) Fixed:
o Enhancement:
    Change Lenovo Logo 
o Limitations:
o Special usage:
  - 2016 FebBlock

Version 10.1, Build ID DSALA6S
o New System Support: 
    System x3500 M5        (5464)
    System x3550 M4        (8062)
    System x3550 M5        (5463)
    System x3650 M4        (8061)
    System x3650 M5        (5462)
    System x3750 M4        (8753)
    System x3850/x3950 X6  (6241)
    System x240            (7162 2588)
    System x240 M5         (9532 2591)
    System x440            (7167 2590)
    System x880 X6         (7196 4258)
    NeXtScale nx360 M5     (5465)

o Problem(s) Fixed:
    License Agreement page abnormal in GUI mode (LV309076)
    When we enter to DSA, UI cannot be full screen (LV309083)
o Enhancement:
    N/A
o Limitations:
   1, If customer select nVidia diagnostic items and other diagnostic item with 
      loop times greater than 1 in CMD mode, there is only one loop diagsnotic 
      log in DSA log. 
   2, In the DSA report of LSI Controller page, it only show basic RAID level. 
      For example, RAID 00 is a subclass of RAID0, while RAID R1-EC is subclass
      of RAID 1, DSA only show them as RAID 0 and RAID 1. Because LSI CIM provider
      can't detect the exact configuration RAID class level of subclass RAID level.
  3,  The CD-based preboot DSA will no longer support nVidia GPU diagnostic. Because
      the new nVidia driver do not support the diagnostic any more. And if customer
      want to do diagnostic on nVidia Tesla serials GPU, they have to refer to the 
      following link for detailed userguide and diags tools download by themselves:
      https://www-947.ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-5096046&brandind=5431802&myns=purflex&mync=R