ThinkSystem RAID 540-x Adapters update BIOS and Firmware (For Linux)

Change History

BIOS and Firmware Update for ThinkSystem RAID 540-x Adapters

Supported Adapters:  
ThinkSystem RAID 540-8i PCIe Gen4 12Gb Adapterr  (4Y37A78834)
ThinkSystem RAID 540-16i PCIe Gen4 12Gb Adapter   (4Y37A78835)
NOTE TO SERVICE - Reference RETAIN #N/A

Version 52.20.0-4375 - Moderate Impact/Low Probability of Occurrence
-------------------
    BIOS:v7.20.01.0
	UEFI Driver:0x07140000
	HII: 07.20.07.00
	IMR FW: 5.200.01-3637
    package 52.20.0-4375
MR 7.20

Defects:
 Fix read wrong config page for NVMe drive behind Atlas(DCSG00954454
 SL OOB: NVME response buffer is not displaying user requested size of response buffer.(DCSG01151757
 MR7.20_Ventura+Windbond_CV learn fails(DCSG01127762
 MR_7.20 missing VD's after OCR and enclosure Pull/Push(DCSG01061674
 Remove SPDM debug logs from UART print(DCSG01022803
 [3408+ MR7.16] configurablePDCount would exceeded if set jbod on while UG drives are in spundown.(DCSG01032834
 FW hits KA when OCR Ctrl has pinned cache, while controller in Safe Mode(DCSG01061904
 CC pause and resume with OCR restarts the CC on VDs that have already completed CC(DCSG01047837
 MR7.19: Aero Ctrl global fault LED is not ON when there is unconfig_bad drive on the Ctrl(DCSG01027566
 iMR 7.20 FW keeps dumping a message to FW log for Encs "Analyzing Status Page"(DCSG01025079
 VSES : Multiple elements of SES page 0xA are assigned the same slot number(DCSG00973316
 Fix a math error in the Memory Pool creation firmware(DCSG01024464
 Performance drop seen with direct attached SAS/SATA drives(DCSG00980873
 Foreign drive import command was successfully executed, but the drive is still marked as a foreign drive(DCSG01039809
 PD Power State Set DCMD interface does not spin up Hot spare drives(DCSG01091672
 21B Alpha LSA: Foreign VD's, VD1 and VD2 names are not displayed in foreign config preview page.(DCSG00927138
 Performance drop seen with SAS/SATA drives in Windows using latest driver(DCSG00981706
 MR 7.20 PA2: truncated coverage data(DCSG01040242
 Reinstate ER 1010648(DCSG01025061
 FW Logs/termlogs should change the Copyright 2017-2022(DCSG01116760
 Blue Screens while collecting "pl dbg" logs(DCSG00984451
 22B:PSOC6 -PSOC download/flash fails having Cv/BBU in failed (bad) state(DCSG01140342
 UBM statistics data collection and UBM error handling fixes(DCSG00975065
 Atlas2 Veloce BST: Wait till MPT driver load complete in single host MPT testcase(DCSG01087297
 Unable to change current behavior mode to NONE from RAID-0 in JBOD personality(DCSG00970577
 Update SSUTimeout Fields Value in BIOS Page 1 to 0xF0(DCSG00982364
 Clearing the tty history with cli delete termlog command causes firmware to hang(DCSG01098208
 Coverity : Remove dead code(DCSG00982343
 Support NVMe Width is displayed as "Yes" for RAID 940-8e controller(DCSG01119307
 Fix MCTP flash firmware issue(DCSG01098220
 No Default value of DMA FIS Timeout(DCSG01028477
 Secure erase is not working properly for UG Bad drive(DCSG01106797
 MR7.20: Found a lot prints "C0:MfgMsg: Error reading device chemistry. I2C Error = 0x2" while PR(DCSG01044765
 MR7.19PA1_After COL locked VD fails to import after becoming unlocked(DCSG00962887
 Diff drives shows as UG and sector size 0/blank in BRCM applications(DCSG01145221
 Fix controller does not show foreign config and pinned cache correctly(DCSG01050353
 Expander show status is being marked unsupported in megaraid and switch configurations(DCSG00958041
 Imbalanced bandwidth performance with 2 x4 expanders connect to Aero IT controller(DCSG00950631
 Copyback status is displayed post clearing configuration(DCSG01039193
 FW asserts on executing scrutiny phy -speed command(DCSG01089818
 Firmware assertion while performing firmware download using offline method on PCIe switch configuration(DCSG00956089
 MR 7.20 PA2: Code coverage code stuck printing forever(DCSG01031802
 Drive secured by non-MR FW owner does not show as "locked" when place behind Mercury OEM controller(DCSG01058849
 7.21: A hang is seen when attempting to update the the psoc using a catalog file when storcli does not support, but FW does.(DCSG01093791
 AeroMR_7.20PA:Storcli Hangs on triggering controller restart and fails to exit command prompt(DCSG01040153
 MR719_PA1_MA drive become jbod(Unsupported) and IO will run on them(DCSG00957470
 PD state change reported only once when copyback is suspended and resumed(DCSG01081139
 Hot add drive on UBM backplane with x2 or X4 DFC reports incorrect element status in SES Page 02h(DCSG00967012
 MR7.20-iMR-Multi-LUN / Multi-Actuator drives show up as good(DCSG01024028
 Fix response to setting JBOD for unsupported drive(DCSG01041383
 [Aero] PCIe Compliance Configuration Failure - 1_44 DPA Ext Cap Struct(DCSG00972342
 ScrutinyCLI in UEFI mode failed to download Aero MR NOPAD images using hostboot (hb) command(DCSG00984134
 BST Failure: Revert defect 1010648(DCSG01021874
 Update BinToRom.exe to match updated BinToRom.c(DCSG01082490
 Added "TimeSyncInterval" to the FW ManPage11 data-struct to match the XSD definition(DCSG01041327
 MR_7.20:VD target IDs changing during foreign config import - DC observed on running IOs post VD import(DCSG01045309
 FW Fault 2622 observed during system boot up in some new Gen4/Gen5 servers(DCSG00947451
 FW not setting Opal MSID password length properly when resetting password to MSID(DCSG01042567
 Remove deprecated Vision builder(DCSG01078124
 MR7.20-Discrete part iMR controller allows PSOC flashing(DCSG01066232
 RefClk enabled for sgpio backplane type(DCSG00995519
 NVMe response buffer differs from host for get smart health information(DCSG01118222
 Firmware asserts during OCR with JBOD auto creation(DCSG01074021
 Fix Missing OCP ROMs Copy Back(DCSG01093193
 VPD data printed on every reboot(DCSG01035788
 MR 7.18: Secure drives creation using multiple secure key unable view and import the first removed encrypted VD until the second VD has been imported.(DCSG00924602
 VD Failure while updating Drives(DCSG01116221
 Integrate IT Security Page Fixes into MR(DCSG01030957
 Update Version Field value in Std Inquiry Data of vSES Device(DCSG00966397
 BST Failure: Update ManPage11 for Phase 21 PL(DCSG01027882
 Fix to handle TTY Flash with write error(DCSG01077025
 MR 7.20: Json Event long message for missing PD needs to be updated(DCSG01040031
 Phy bad events seen for one of the Enclosure Valid Slot(DCSG01088807
 Fix too many debug messages(DCSG01032533
 Data Abort exception happened during journaled writes(DCSG01113159
 Fix EPD boot disk not available at legacy BIOS(DCSG01111179
 (SATA Only) Inquiry command to read Block device Characteristics VPD Page fails on some SATA drives(DCSG01025293
 Two elements of SES Page A are assigned same slot number for UBM backplanes with x2 DFC(DCSG00966202
 Fatal firmware error detected after converted SATA SSD PD to JBOD(DCSG01112314
 Critical Error Log created if the Firmware Download of BIOS using BIOS image from different package than Firmware.(DCSG00951807
 Fix Delayed Expansion Issue in add_catalog_rom.bat(DCSG01092304
 Update the Default Vendor ID of Virtual SES Device(DCSG01012204
 Unsupported MPI Config page read from OOB provides data in response(DCSG00937617
 Drives not discovered when an enclosure is hot plugged after removing a PCIe switch based JBOF(DCSG00957168
 EPD is not created after import with escrow if escrow key matches controller key(DCSG00968394
 FW asserts when try to create secured VDs using a FDE drive(DCSG01138487
 Patrol read fails to correct medium error on verify capable NVME drives(DCSG01055287
 Fix unmap writesame for a NVMe drive with small max data buffer length(DCSG00972351
 SATA only : ATA PT command for SMART READ ATTRIBUTE THRESHOLDS(B0h/D1h) fail when COUNT field is set to 0(DCSG01030777
 Autoconfig fails to create R0 or EPD on eligible drives in presence of Multi-Lun drives.(DCSG01030203
 When read termlogs observing Copyright as 2017-2018 which needs to be changed to 2017-2021(DCSG00960207
 Data Miscompare observed with sliced R5 Logical Drives during write(cache) policy change(DCSG01161554
 Drive changes from UG to UB, when user start the initialization followed by secure erase on same drive(DCSG00837473 (Port Of Defect DCSG00946483)
 MR7.20: Found a lot prints "C0:MfgMsg: Error reading device chemistry. I2C Error = 0x2" while PR(DCSG01044765 (Port Of Defect DCSG01077927)
 Patrol read fails to correct medium error on verify capable NVME drives(DCSG01055287 (Port Of Defect DCSG01078110)
 Fixed fault 0xF000 when doing VSES task management(DCSG00927996 (Port Of Defect DCSG00934187)
 Boot message "Error restoring offloaded cache" popup for 940 card w/o SuperCap during AC power cycles(DCSG01087695 (Port Of Defect DCSG01116312)
 Connector name in SAS Device Page 0 of the VSes/DA-SEP is not set correctly(DCSG00995575 (Port Of Defect DCSG01003869)
 SPDM key reading failed when complete flash Erase case(DCSG01032600 (Port Of Defect DCSG01032601)
 Incorrect PLDM firmware release date is displayed in BMC applications(DCSG00926179 (Port Of Defect DCSG00966522)
 FW hits an ERROR: Exception Handler EXCEPTION during reboot of a server with PCIe gen5(DCSG01097640 (Port Of Defect DCSG01107907)
 Aero 7.19 iMR: CBB unable to find secondary image(DCSG00987835 (Port Of Defect DCSG01038387)
 BMU set startlearntime does not set properly(DCSG00917983 (Port Of Defect DCSG00991775)
 Fault 0xEE19 observed while running lane break test with managed switch attached to controller.(DCSG00939163 (Port Of Defect DCSG00947866)
 KeyID is cleared before the transition is finished(DCSG00936150 (Port Of Defect DCSG00977211)
 NVRAM signature invalid. Aborting DDR scrub & ECC check!!!(DCSG01111513 (Port Of Defect DCSG01126920)
 FW asserts when try to create secured VDs using a FDE drive(DCSG01138487 (Port Of Defect DCSG01148515)
 MCTP : MCTP MPI requests are failed with drive missing status even when drive is present(DCSG00952803 (Port Of Defect DCSG00956655)
 SATA : one or more HDD are not discovered by OS when drives behind expander are powered ON(DCSG00947126 (Port Of Defect DCSG00964427)
 7.21: A hang is seen when attempting to update the the psoc using a catalog file when storcli does not support, but FW does.(DCSG01093791 (Port Of Defect DCSG01099363)
 Incorrect slot number reported for drive with bad Phy(DCSG00986779 (Port Of Defect DCSG00989522)
 [3408+ MR7.16] configurablePDCount would exceeded if set jbod on while UG drives are in spundown.(DCSG01032834 (Port Of Defect DCSG01044605)
 Bad sensor slot case should not counted again when marking slot bad.(DCSG00961696 (Port Of Defect DCSG00977229)
 SATA drive is not detected during hot plug test(DCSG00975159 (Port Of Defect DCSG01062363)
 NOTIFY(ENABLE SPINUP) is not sent to spin up legacy SAS drives when partial/slumber mode is enabled.(DCSG01044213 (Port Of Defect DCSG01137571)
 VD Failure while updating Drives(DCSG01116221 (Port Of Defect DCSG01124651)
 DMA error observed during xtools 'show' command in Atlas behind Aero config(DCSG01051896 (Port Of Defect DCSG01079552)
 NVME EPDs, with heavy IOs and TM from host side and NVMe passthru commands in loop from OOB. After 5-8 hrs hit KA(DCSG00939439 (Port Of Defect DCSG00970531)
 Secure erase is allowed on JBOD/EPD(DCSG00840773 (Port Of Defect DCSG00970537)
 Some drives missing in OS when Direct attached slot order event replay flag is set in NVDATA(DCSG00991409 (Port Of Defect DCSG00996085)
 Log Power State Change event for Hot spare drives spun up using MR_DCMD_PD_POWER_STATE_SET DCMD(DCSG01137533 (Port Of Defect DCSG01138265)
 Firmware asserts during OCR with JBOD auto creation(DCSG01074021 (Port Of Defect DCSG01091678)
 FW Logs/termlogs should change the Copyright 2017-2022(DCSG01116760 (Port Of Defect DCSG01119586)
 FW hits an ERROR: Exception Handler EXCEPTION during reboot of a server with PCIe gen5(DCSG01097640 (Port Of Defect DCSG01107908)
 MR_7.20 missing VD's after OCR and enclosure Pull/Push(DCSG01061674 (Port Of Defect DCSG01074900)
 Fix LSA time sync problem(DCSG01029543 (Port Of Defect DCSG01034066)
 PCIE failure causes TBM failure which leads to control plane hang(DCSG00969750 (Port Of Defect DCSG00990809)
 Incorrect usage of Block Limits Virtual physical disk npwg field resulting in 0x7 being treated as 7 512B sector length IOs with NVMe drives(DCSG01026871 (Port Of Defect DCSG01032306)
 Assertion failure in FW when user initiate rebuild on partial degraded R6 VD(DCSG00921397 (Port Of Defect DCSG00970530)
 Fault 0xEC0F seen while aborting an active recovery on a NVMe drive(DCSG01021656 (Port Of Defect DCSG01023749)
 FW stuck in COL-BIOS Reset loop when COL times out(DCSG00907382 (Port Of Defect DCSG00932410)
 MR7.20-Discrete part iMR controller allows PSOC flashing(DCSG01066232 (Port Of Defect DCSG01070280)
 CLI application shows improper error import message after successful Foreign import(DCSG00915940 (Port Of Defect DCSG00970535)
 MR7.20-Drive pull during recon-Assertion failure in fw\raid\pd.c at line 8254 AR Invalid(DCSG01054517 (Port Of Defect DCSG01066945)
 Kill adapter seen on multiple EPDs with IOs with TMs(DCSG00923995 (Port Of Defect DCSG00970534)
 Controller marks a drive UBUnsp if the server is rebooted while running Sanitize Overwrite(DCSG01141274 (Port Of Defect DCSG01165082)
 Clearing the tty history with cli delete termlog command causes firmware to hang(DCSG01098208 (Port Of Defect DCSG01108301)
	
EnhancementRequests:	
 Add Firmware Version 11 for PartNumbers 29211 and 29651 to PSoC Catalog Image(DCSG01149460
 Update ControllerInfo Structure with PartNumber - API Changes(DCSG01064529
 ATA Passthrough handling of ATA commands(PIO DATA IN) obsolete in latest ATA specification for backward compatibility(DCSG00999763
 Connector Order change for 9502-16e controller(DCSG00966344
 Safestore: MegaRAID key management feature: temporary key escrow(DCSG00918486
 Clean up include files(DCSG00977963
 added new BST file for shenandoah(DCSG01108340
 PEX89000: Single host MPT BST support on Veloce(DCSG01024714
 Update XSDs with Proper Active High/Low Flags for GPIO_LED_GLOBAL_FAULT(DCSG01082422
 Block Multi-LUN / Multi-Actuator : SAS Device only Report as Unsupported Device(DCSG00907506
 Snapdump: Remove duplicate entry in additional battery statistics(DCSG00951438
 Reorder Snapdump files for reliability(DCSG01008677
 Add PSoC 6 FW to Catalog File(DCSG01107483
 SAS phy port configuration of UBM connected phys based on UBM DFC Link width.(DCSG00927212
 Add a tool for code coverage(DCSG01000074
 Improve python handling during code coverage builds (MR)(DCSG01040296
 PL SATL : Add SAT translation for the Concurrent Positioning Ranges VPD page(DCSG00927210
 Add Firmware Version 9 for PartNumbers 29211 and 29651 to PSoC Catalog Image(DCSG01136458
 PEX89000:Use SDB to inject errors in Error Counter BST testcase(DCSG01079551
 Create offload expected status field in NVSRAM(DCSG01098154
 Remove the Standard IO Header from cache offload module(DCSG00985595
 SRAM layout changes for code coverage(DCSG01026846
 Release Automation: automate rebase operation for phase specific streams(DCSG00950531
 UBM error handling improvements and debug statistics data collection(DCSG00903198
 Add Firmware Version 6 for PartNumbers 29211 and 29651 to PSoC Catalog Image(DCSG01126019
 Update linker script file for mbed TLS component(DCSG00966563
 Add code coverage configuration(DCSG01005808
 Update SAS 3.5 FW summary release notes(DCSG00979878
 Add Firmware Version 3 for PartNumber 29211 to PSoC Catalog Image(DCSG01116340
 Add Firmware Versions 27 and 1 for PartNumbers 15987 and 25731 to PSoC Catalog Image(DCSG01166118
 Remove old MCTP OEM-conditional code(DCSG01016044
 Spell Checking Corrections Part 6(DCSG00963337
 DRAM layout changes for code coverage(DCSG01010648
 Add Interposer PSoC 6 FW to Catalog File(DCSG01121802
 Dump code coverage counters for Ondemand Snapdump(DCSG01020724
 Add Code Coverage infrastructure(DCSG00981200
 Remove some whitespace from the config page firmware(DCSG00968465
 Check in the build system's supporting function that can checks print statement consistency(DCSG00977490
 Add Lmid/Smid local/host mem dump into SD(DCSG00289727
 Add partial xml for 9502-16i Controller OCP form factor(DCSG00961958
 Integrate SPILIB 2.0 into MR Firmware for Aero, Sea and Ventura(DCSG00040487
 Release Automation: Assign release type when creating ROP(DCSG00941419
 [Aero] Enable UBM detection logic on all connectors for OEM HBA with SEP_PRESENT GPIOs(DCSG00927207
 Improve code coverage statement counting near prints(DCSG01031751
 Add control command MFI_OOB_MCTP_CONTROL_EXCEPTION_NO_CMD (0x99) in API(DCSG01065378
 Add Vision sources to cpld_src(DCSG01082289
 Add Firmware Version 7 for PartNumber 29211 to PSoC Catalog Image(DCSG01128627
 [UBM] Add detection of SAS/SATA drive with UBM backplane supporting IFDET2# and PRSNT#(DCSG00945423
 Add Firmware Version 5 for PartNumbers 29211 and 29651 to PSoC Catalog Image(DCSG01123516
 Add 9502-16e board Nvdata to Aero ROP(DCSG00966467
 Update BinToRom for Multiple PSoC Images(DCSG01063758
 Release Automation: Update scripts for FW Ph21(DCSG01008758
 Reorder Snapdump data collection for reliability(DCSG00991989
 Add NVDATA option to change DMA Activate FIS timeout value.(DCSG00952761
 Update PSoC Bootloader Design in MR FW for PSoC 6(DCSG01107508
 Snapdump Enhacement - SES Module(DCSG00952775
 MR SAS Multipath Improvements(DCSG00956036
 Update PSoC MR FW Downgrade Block MFI_STAT to be More Clear(DCSG01155856
 Release Automation: Check for failure during baseline creation(DCSG00958012
 Add Reboot logs for windows Cache Offload BST(DCSG01074472
 PEX89000: Veloce Cosim Dev BST framework(DCSG01001901
 Atlas2 BST ER: PCIE and SysDMA feature BST Evaluation for COSIM(DCSG01006212
 Snapdump improvement - dump NVRAM key info(DCSG00951413
 Support flash usage above 4 MB(DCSG01006737
 Add OEM build action to SCONS(DCSG00996371
 Remove SASPARSER binary from Release Order(DCSG00957868
 Clean up inline functions(DCSG00984425
 Add Firmware Version 10 for PartNumbers 29211 and 29651 to PSoC Catalog Image(DCSG01136459
 Add Firmware Version 12 for PartNumbers 29211 and 29651 to PSoC Catalog Image(DCSG01159010
 Add Firmware Version 8 for PartNumbers 29211 and 29651 to PSoC Catalog Image(DCSG01130658
 FDE logging improvement: consolidate VKI_PRINTF(DCSG00904945
 Dump code coverage counters on controller reset(DCSG01005809
 Create adjusted code coverage reports(DCSG01050388
 MegaAPI_PVT: Move VPD get DCMD from private to public API to Enable end user tools to read custom SN(DCSG00950711
 Improve python handling during code coverage builds (fw_bld_tools)(DCSG01040300
 Code Space Optimization(DCSG01017044
 Atlas2 BST ER: Multi host flash boot: create synthetic hierarchy and basic EP and config traffic(DCSG01021605
 PEX89000:Veloce Cosim Dev BST error counter testcase(DCSG01006209
 secureSignBin: implement feature to download the public key during signing or with explicit arg(DCSG01035866
(DCSG01082488
 Enhance out of order insertion feature to support R1 & R10(DCSG00903546
 PL SATA : Read logpage 12 and 13 during SATA initialization to get features supported for NCQ encapsulation using FIS porting(DCSG00779724
 Improve a print error message in traceTool.py(DCSG00945787
 Move to the latest mbed_tls version which is 2.26.0(DCSG00966339
 Remove allocation of PCIe devices when NVMe is disabled in NVDATA(DCSG01015478
 PEX89000: Update Cosim DevBST framework to support launching simulation from outside user shadows(DCSG01093267
 SPILIB2: Port all changes AV1 to AV2 for manual access files(DCSG00917802
 Add PERC Signing Build Targets to fwSConstruct(DCSG01071385
 Add Scons checking for code coverage(DCSG01026819
 Support streaming of debug logs (HTB) via I2C OOB band on Ventura/Aero IOC/HBA (Part B)(DCSG00927213
 LD Secure Erase and Progress Reporting(DCSG00931395
 PEX89000: Update BST framework for Linux host and other enhancements(DCSG01062557
 Add Atlas2 A0 devBST for automatic CQ launch(DCSG01003423
 SPILIB: Update build scripts for ADS(DCSG00943761
 Reintroduces the previous security page as MR_MPI26_CONFIG_PAGE_SECURITY_1 to align with current NVDATA(DCSG00977495
 Extending SnapDump Persistence(DCSG00247000 (Port Of EnhancementRequest DCSG00966519)
 Enable DASEP detection on SASA for Adapters(DCSG00983302 (Port Of EnhancementRequest DCSG01071382)
 Bad Phy detection logic improvement(DCSG00932841 (Port Of EnhancementRequest DCSG00977228)
 Error handling of UBM CHANGE_DETECT# signal(DCSG00962565 (Port Of EnhancementRequest DCSG00963253)
 Do not generate "Bad Phy" event for NVMe drives that fail NVMe Init(DCSG00543046 (Port Of EnhancementRequest DCSG01070337)
 Update ControllerInfo Structure with PartNumber(DCSG01063757 (Port Of EnhancementRequest DCSG01074470)
 Disk labels need to be tied to fixed physical ports in order(DCSG00240927 (Port Of EnhancementRequest DCSG00966521)
 Enable DASEP detection on SASA for Adapters(DCSG00983302 (Port Of EnhancementRequest DCSG00990994)
 MR FW Need a smooth and authenticated method to transition from LKM to EKMS (SEKM)(DCSG00318546 (Port Of EnhancementRequest DCSG00432105)
 Passthrough Support for Vendor Specific NVMe Opcode D9h and C0h(DCSG01128891 (Port Of EnhancementRequest DCSG01151746)
 Create new profile with only SAS/SATA drive support for new controllers for DASEP backplanes(DCSG00991280 (Port Of EnhancementRequest DCSG01070765)
 Remove Retries When INQUIRY for Extended VPD Page 86h Returns 5/24/00(DCSG00922081 (Port Of EnhancementRequest DCSG00966515)
 NVMe Passthru command support(DCSG00432879 (Port Of EnhancementRequest DCSG00966518)
 Add PSoC Image Checking and MR FW Blocking(DCSG01064530 (Port Of EnhancementRequest DCSG01074471)
 Enhance Error scenario handling in SEKM Feature code(DCSG00966411 (Port Of EnhancementRequest DCSG00974796)
 Create new profile with only SAS/SATA drive support for new controllers for DASEP backplanes(DCSG00991280 (Port Of EnhancementRequest DCSG01069429)
 Update and Add PSoC Image Building Batch Files(DCSG01063756 (Port Of EnhancementRequest DCSG01074467)
 Do not generate "Bad Phy" event for NVMe drives that fail NVMe Init(DCSG00543046 (Port Of EnhancementRequest DCSG01070769)
 LKM compliance to Cryptographic Algorithm Requirements v1.5(DCSG00830702 (Port Of EnhancementRequest DCSG00966516)
 Sea iMR CBB Updates(DCSG00980247 (Port Of EnhancementRequest DCSG01032931)


Version 52.19.0-4165 - Moderate Impact/Low Probability of Occurrence
-------------------
    BIOS:7.19.00.0
	UEFI Driver:0x07130200
	HII: 07.19.04.00
	IMR FW: 5.190.01-3553
    package 52.19.0-4165