Lenovo RAID Adapter Firmware

Change History

BIOS and Firmware Update for ThinkSystem RAID 940-x xGB Flash PCIe 12Gb Adapters

Supported Adapters: 
ThinkSystem RAID 940-8i 4GB Flash PCIe Gen4 12Gb Adapter  for 4Y37A09728
ThinkSystem RAID 940-8i 8GB Flash PCIe Gen4 12Gb Adapter  for 4Y37A09729
ThinkSystem RAID 940-16i 8GB Flash PCIe Gen4 12Gb Adapter  for 4Y37A09730
ThinkSystem RAID 940-16i 4GB Flash PCIe Gen4 12Gb Adapter  for 4Y37A78600
ThinkSystem RAID 940-32i 8GB Flash PCIe Gen4 12Gb Adapter  for 4Y37A09733
ThinkSystem RAID 940-16i 8GB Flash PCIe Gen4 12Gb Internal Adapter  for 4Y37A09735
ThinkSystem RAID 940-8e 4GB Flash PCIe Gen4 12Gb Adapter for 4Y37A78836

NOTE TO SERVICE - Reference RETAIN #N/A

Version 52.30.0-5632 - Moderate Impact/Low Probability of Occurrence
-------------------
    BIOS:7.30.00.0
	UEFI Driver:0x071E0000
	HII: 07.30.02.00
	MR FW:5.300.00-4030
    package 52.30.0-5632
MR 7.30

Defects:
-Foreign drives are not accessible in the RDE client.(DCSG01540844
-Empty bay resource shown only if the bay is empty.(DCSG01526851
-Firmware fault observed while removing the foregin drives from the configuration.(DCSG01571973
-RDE - Imported volume can't be accessed from REST client.(DCSG01566518
-RDE - ControllerOK alert was generated after inserting the configured drive.(DCSG01560822
-Fixed the loop index resolution while looing for NVRAM Drive Box Bay that was causing infinite loop.(DCSG01523908
-RDE - DriveInserted alerts were not generated after inserting the drive.(DCSG01560316
-MegaRAID 7.28: firmware assertion in timer module while running MCTP out of band communication.(DCSG01569025
-Property changed event is not generated when drivespindownatshutdown feature is updated.(DCSG01675568
-Fix controller stuck in discovery when connected to an expander.(DCSG01678301
-NVMe: a certain NVMe 2.0 device fails to initialize.(DCSG01547099
-Firmware assertion mem.c at line 897 while running IO on 240 R0 logical drive and online control reset every 3 minutes.(DCSG01689160
-Fixed the improper Connected Ports URI under the Storage Data Model Port Resource.(DCSG01522736
-Redfish Alert DriveOffline for user forced configured drive Offline does not show correct severity.(DCSG01591152
-MCTP discovery : Set EID request timeout.(DCSG01587543
-Fix Redfish Annotations observations from OEM.(DCSG01557281
-BatteryOK RDE alert was logged after every AC power cycle of the server.(DCSG01496206
-Reduce MegaRaid HDD sequential read performance.(DCSG01485699
-Task management failure and assertion seen during hard reset test on JBODs.(DCSG01531972
-Help commands being shown instead of useful information in start of day snapdump.(DCSG01570991
-(NVMe Only): Ensure NVMe drive limits are not overridden by NVData.(DCSG01684592
-Predictive failure RDE alert for a drive was logged twice on a single server reboot or controller reset.(DCSG01496212
-JBOD LED locate from host tools not working properly.(DCSG01629386
-Redfish Fabric Port URI last segment does not match with the PortId property.(DCSG01576744
-Fix the offline drive firmware download timed out error handling.(DCSG01666361
-Fix error message for wrong checksum.(DCSG01599057
-Bitwise operation doesn't give expected result.(DCSG01680369
-Write Cache Data Loss RDE alert is not generated by the controller.(DCSG01572635
-Missing Debug Function in Firmware Used for Host IO Test Case.(DCSG01687564
-When Verify command to NVMe drive was aborted, resource Mid was not freed.(DCSG01658338
-VMware OS reported IOMMU Fault iMR controller while running virtual machine IOs VM and controller reset.(DCSG01525592
-Direct attached Lane break test failed on Gen4 NVMe U.2 drive.(DCSG01556638
-ddrlib RL data eye analysis debug print typo.(DCSG01373989
-(NVMe Only) Maximum Write same Length should be 64 bit field in 'Manufacturing Page 57' of NVData.(DCSG01685540
-Battery Charging Redfish Event is not generating for redfish battery status for Broadcom controllers.(DCSG01542197
-Imported secured drives in a span became unsecured.(DCSG01726083
-Redfish Volume Initialize Allowable Values restricted based on the Allowed Operations.(DCSG01571985
-ControllerDegraded RDE alert does not contain second argument for the degraded reason.(DCSG01547937
-SCSI NVMe Translation Layer: MID resource usage for Verify Command.(DCSG01655177
-Drive removal events are delayed when drive push pull is performed on mixed drive configs.(DCSG01680390
-Redfish - Boot-Message Action missing for some Redfish Alerts.(DCSG01574244
-Parallel physical drive firmware download while running IOs causes kill adapter.(DCSG01600042
-PL: Firmware failed assertion check for some NVMe drive models.(DCSG01571116
-Only relevant and applicable allowable writable property values, are shown for RAID volumes and JBODs.(DCSG01571983
-PLDM firmware update on UBM5 backplane is failing with timeout error.(DCSG01492588
-Firmware validates the drive resource URI for POST operation.(DCSG01576816
-Value of "@odata.etag" is missing under Volume Capabilities in Redfish and fix CapacityBytes maximum value range.(DCSG01593161
-Redfish - Fabric's Port Collection lists incorrect Port Id in the URI.(DCSG01588736
-Replaced OEM specific max supported physical devices with profile max supported devices in some of the loops.(DCSG01521525
-RDE - DriveMissingCleared RDE alerts are not logged after all the drives of an array are removed.(DCSG01562390
-Firmware Marks SuperCap as Bad after Power Cycle and Previous Learn Timeout.(DCSG01632830
-NVDATA major version was updated to be same as Phase Version.(DCSG01477125
-Host boot failure caused a UEFI hang on some systems.(DCSG01562181
-Empty JSON PATCH request from REST client results in incorrect HTTP error code.(DCSG01595503
-Fix static analysis tool reported defects.(DCSG01659119
-issue was discovered for a virtual drive that went offline but did not have any pinned cache..(DCSG01641797
-Controller does not indicate error when pinned cache is present during PLDM drive firmware update.(DCSG01555840
-95XX card: When JBOD Expanders are periodically reset, drive in a large topology may go missing.(DCSG01592213
-Corrected the logic to find the empty bay.(DCSG01535023
-RDE Module Initialization fails with x1 UBM6 backplane due to non-unique HFCIdentity.(DCSG01609666
-Storcli show incorrect CacheVault flash size on board.(DCSG01697778
-Build all failed on firmware int code.(DCSG01571899
-SATA SSDs are not enabled for drive spindownatshutdown after updating to 7.30 from previous program where it is not supported.(DCSG01665341
-9540-16i controller is not generated snapdump on OEM server when start of day PL logs capture feature is set.(DCSG01576996
-Correct the routing of Led Data output based on the selected GPIO..(DCSG01633536
-Fix MSS Print Mask when Shmoo Plots are Enabled.(DCSG01645625
-Drives are marked as Unconfigured Bad in 9540 controller during the hot-plug test..(DCSG01528863
-Redfish - Exception seen with secure foreign drives during reboot.(DCSG01531576
-Redfish - Unnecessary VolumeOffline alert avoided during controller boot with secured configuration.(DCSG01560942
-Unnecessary prints seen during shutdown/reboot with configured drives when drive spindownatshutdown is enabled.(DCSG01665378
-Values in Manufacturing Page 57 fields were not correct.(DCSG01651949
-[IN776543]Improper product name for UBM5 BP.(DCSG01535249
-Controller firmware crashed during system boot up.(DCSG01526845
-Fix drive firmware download timeout in mode 5 through OOB MCTP.(DCSG01614185
-Fix for DriveOffline/Cleared and VolumeOffline/Cleared alerts for certain foreign config scenarios.(DCSG01545702
-Fix target ID assignment with cooldown when trying to create multiple logical disks in one command.(DCSG01625158
-Address review comments for the Fabric Data Model changes.(DCSG01521552
-RDE - Status is not updated for the volume resource when copyback operation is in progress.(DCSG01570711
-Enable security fails on JBOD drives sometimes with External key management server..(DCSG01717000
-Invalid Enclosure ID was observed when NVMe drive was hotplugged to 9580 card.(DCSG01550785
-(NVMe Only): Invalid verification length was not returning check condition.(DCSG01669988
-Firmware is not filling the MR_CTRL_INFO.prop values..(DCSG01663210
-DriveOfflineCleared Redfish Alert not posted after SED imported with a different Key.(DCSG01542190
-Use Direct GPIO LED management if the 3808N Device LED Management policy is set..(DCSG01576748
-9540-16i controller firmware sending a lot prints rolling while capturing snapdump.(DCSG01582911
-PLDM Firmware Flash in a Loop Fails with a Checksum Error.(DCSG01598480
-iMR firmeare debug log always shows one less snapdump count comapred to CLI output.(DCSG01615969
-Change the new M0 code version(0x6C30) in version control file..(DCSG01550876
-Adjust feedback file to keep debug function.(DCSG01645646
-REST client does not display details of copyback operation on drive.(DCSG01502940
-RDE - Fix observations from OEM.(DCSG01555693
-Handle Link isolation on PL initiated task management timeout.(DCSG01614816
-Send ControllerOK Redfish Event when ControllerDegraded event was logged earlier.(DCSG01472892
-Unstable drive event logged during diag failure on repeated drive push pull.(DCSG01617759
-OEM Controller is not booting and stuck during Enclosure Initialization with switch.(DCSG01523695
-Simultaneous Read/Write Miscompare: Data Read Does Not Match Data Written.(DCSG01523599
-Fix incorrect write journal status in PCE bar change cmd block.(DCSG01733715
-Fix controller hang due to miscalculation of cache dirty lines.(DCSG01632589
-Controller hits assertion and resets during factory tests.(DCSG01726523
-Fix drive firmware download timeout due to slow OOB download.(DCSG01580987
-Build all failed on firmware int code.(DCSG01538008
-Read(32) or Write(32) CDB sent to NVMe drive reported incorrect additional sense code.(DCSG01546839
-Fix 'Static Analysis Tool' reported items in Firmware.(DCSG01571779
-(NVMe Only): Fault 0x6001 was observed for verify(16) command sent to drive.(DCSG01667121
-PLDM Type 5 - NVMe drive firmware version is not updated after successful update.(DCSG01507674
-Controller firmware faults with fault code 0xD20F during system reboot test.(DCSG01635232
-Read-Modify-Write is Not being Enabled Correctly after a Cache Offload.(DCSG01666406
-Secured spanned Virtual disk creation is successful..(DCSG01507594
-Missing Debug Function in Firmware Used for Backend PCIe Link Configuration.(DCSG01692694
-(NVMe Only): verify command did not return correct sense information.(DCSG01672961
-MSS lib update to reflect Extended Temp Range and Temp Controller Refresh removal..(DCSG01560670 (Port Of Defect DCSG01562699)
-Kill adapter during firmware upgrade and Downgrade with IO..(DCSG01489940 (Port Of Defect DCSG01521522)
-Pulling low power mode NVMe drive causes PL Fault.(DCSG01542341 (Port Of Defect DCSG01550338)
-Long running task for back ground operation are completed to the MC..(DCSG01472315 (Port Of Defect DCSG01473477)
-SATL UNMAP command with parameter list 6 returns wrong Additional sense.(DCSG01660851 (Port Of Defect DCSG01661540)
-Controller Asserts because PCI bar initialization timeouts waiting for boot message processing.(DCSG01670634 (Port Of Defect DCSG01690384)
-Pulling low power mode NVMe drive causes PL Fault.(DCSG01542341 (Port Of Defect DCSG01550340)
-RDE - Incorrect HTTP error code displayed for Redfish CREATE operation without JSON body.(DCSG01480038 (Port Of Defect DCSG01483734)
-Adjust feedback file to keep debug function.(DCSG01645646 (Port Of Defect DCSG01654818)
-PLDM firmware update on drive fails when there are different drive models are connected to the controller.(DCSG01462783 (Port Of Defect DCSG01499994)
-VD creation on a particular drive fails with firmware fault.(DCSG01603980 (Port Of Defect DCSG01609918)
-Task Management fail after cable pull with large topology.(DCSG01597290 (Port Of Defect DCSG01611169)
-Fix controller hang due to miscalculation of cache dirty lines.(DCSG01632589 (Port Of Defect DCSG01638817)
-Replaced OEM specific max supported physical devices with profile max supported devices in some of the loops.(DCSG01521525 (Port Of Defect DCSG01540496)
-fixed Static analysis tool reported issue.(DCSG01464892 (Port Of Defect DCSG01467765)
-Cable management diagnostic command shows incorrect data for some cables.(DCSG01427369 (Port Of Defect DCSG01451464)
-PLDM Firmware Download: Assertion failure in ..\cpu\arm\exceptions.c at line 1046 on triggering QueryDeviceidentifier command in Download state.(DCSG01488473 (Port Of Defect DCSG01505930)
-Blocking of Drive Write Cache for NVMe drives is removed for a particular OEM.(DCSG01462821 (Port Of Defect DCSG01482324)
-Firmware does not honor PCIe BAR modified/configured by the host at run-time leading to UR for MemRD..(DCSG01633525 (Port Of Defect DCSG01658398)
-Defect fixes and the associated fixes found during Static Code Analysis.(DCSG01465244 (Port Of Defect DCSG01467762)
-Direct attached Lane break test failed on Gen4 NVMe U.2 drive.(DCSG01556638 (Port Of Defect DCSG01567886)
-JBOD volumes link is enabled for Drive resource in RDE.(DCSG01470015 (Port Of Defect DCSG01473478)
-Foreign drives are not accessible in the RDE client.(DCSG01540844 (Port Of Defect DCSG01544875)

EnhancementRequest:
-RDE - Implement separate PDRs for Chassis Data Model.(DCSG01521504
-NVRAM: Add fields to track phy state to support Link Isolation feature.(DCSG01601124
-Disable Temperature Controlled Refresh and Extended Temperature Range in the Firmware.(DCSG01651959
-Battery relearn starts/completes in a loop after clearing nvram.(DCSG01561805
-Add Firmware Version 25 for PartNumber 29652 to PSoC Catalog Image.(DCSG01602093
-NVRAM: Add Fields to Enable/Disable Shmoo Plots.(DCSG01625743
-Added support for OEM specific generic backplane.(DCSG01461749
-Enhance firmware logging to include PL logs from initial discovery at start of day to address Drive lost across reboots.(DCSG01524005
-Added support for get AutoVolumeCreate.(DCSG01510365
-Enhance discovery state machine to complete slot mapping before a drive is inserted..(DCSG01463291
-Snapdump CRC replay debug.(DCSG01572396
-RDE - Add PATCH support for AutoVolumeCreate schema property of Storage resource.(DCSG01517538
-RDE alerts severity to align with exceptions as mentioned in OEM specification.(DCSG01509605
-Add Firmware Version 24 for PartNumber 29652 to PSoC Catalog Image.(DCSG01598659
-Implemented debug function to skip UEFI driver handshake wait.(DCSG01520376
-Add support for VolumeOffline and VolumeOfflineCleared Redfish Enhanced Alerts.(DCSG01473533
-Added support to send VolumeOffline and VolumeOfflineCleared RDE events when drives get locked and reprovisioned respectively.(DCSG01471998
-Modify SPDM capable firmware behavior when certificates are not available.(DCSG01605666
-Enhance NVMe Shutdown Timeouts.(DCSG01440232
-Request for additional information about host PCIe from OOB.(DCSG01544525
-Redfish - Implement new Controller Alerts.(DCSG01466479
-Add Firmware Downgrade Restriction for OEM Boot Card.(DCSG01659529
-3808N: Power customization for Generic and OEM specific profiles.(DCSG01537426
-Add Shmoo Plot Enable/Disable Logic.(DCSG01541708
-Make Auto Configure Behaviours option configurable for all variants of a specific OEM controllers.(DCSG01508502
-RDE - Add support for Redfish Chassis Data Model.(DCSG01508594
-Update NVDATA Major Version for Ph30.(DCSG01588354
-Make Temp Controlled Refresh (TCR) configurable in DDR library..(DCSG01604054
-Improve message for valid range on delaying controller reset..(DCSG01572803
-Implement support to update Controller Rates using RDE.(DCSG01461751
-Implement target ID and sysPD cooldown timer and bypass option for iMR.(DCSG01490067
-[95xx] Reduction in default maximum resource count values in Runtime Configuration Parameters for Enclosures and Expanders.(DCSG01443947
-Add a new controller property to control spindown of configured drives during shutdown.(DCSG01609103
-Firmware: Disk pending defects count support added.(DCSG01486632
-Implemented the infrastructure for Empty Drive Bays registration and Un-registration..(DCSG01505124
-List down the Third Party Licenses used in Firmware.(DCSG01629211
-Add Firmware Version 23 for PartNumber 29652 to PSoC Catalog Image.(DCSG01589449
-PLDM drive firmware update takes longer time than expected.(DCSG01546551
-Fix Reset Hangs on EMR Platforms.(DCSG01703241
-Removed IML Codes.(DCSG01460306
-Add functionality to generate shmoo plots in DDR library.(DCSG01587288
-Updated Firmware to support SCSI to NVMe Translation Spec 1.10.(DCSG01521548
-Firmware support for SCSI NVMe Translation Layer Specification version 1.14.(DCSG01611691
-Allow UNKNOWN Element Updates for OEM.(DCSG01726065
-Support for Redfish Annotations - Allowable Values and Pattern.(DCSG01524478
-RDE - Add new RDE alerts adhering to Storage Device Message Registry 1.1.0.(DCSG01460483
-Firmware: Ensure that IT firmware can not run on the 3808N.(DCSG01494307
-Handle Outstanding Host Commands During Firmware Flash.(DCSG01654295
-RDE - Set Volume schema property IOPerfModeEnabled based on the performance tuning settings of the controller.(DCSG01535793
-RDE - Display Storage details under Drive.Links for empty drive bays.(DCSG01547936
-PL support for Direct GPIO LED management..(DCSG01494319
-Add Firmware Versions 27 and 30 to PSoC Catalog Image.(DCSG01670489
-Firmware: POC for Hostless iMR on 50134 SKUs.(DCSG01572059
-Add OEM customizations for Generic Features.(DCSG01458622
-Update SCSI to NVMe translation to version 1.10.(DCSG01524008
-Implemented the support for new properties.(DCSG01525631
-Link Isolation feature support to avoid one fault drive affecting RAID card functionality.(DCSG01547626
-Add Firmware Versions 26, 29, and 4 to PSoC Catalog Image.(DCSG01622792
-NVRAM: Add fields to track controller property 2 user updates.(DCSG01651498
-Add support for 'Availability' state set for controller composite sensor.(DCSG01458117
-Add support for Redfish Fabric Data Model.(DCSG01504746
-NVDATA switch to enable the PDB0B core for 3808 N controller.(DCSG01551132
-NVDATA switch to enable the PDB0B core for 3808 N controller.(DCSG01551132 (Port Of EnhancementRequest DCSG01556364)
-NVMe: handle vendor specific failure condition.(DCSG01533800 (Port Of EnhancementRequest DCSG01536830)
-Port target ID cooldown timer and bypass option for RAID volume and SysPD.(DCSG01547627 (Port Of EnhancementRequest DCSG01616928)
-3808N: Power customization for Generic and OEM specific profiles.(DCSG01537426 (Port Of EnhancementRequest DCSG01550354)
-Expander based backplane is not updating page 0xA on drive pull/insertion.(DCSG01358471 (Port Of EnhancementRequest DCSG01546310)
-Added duplicate MID protection support to multi-LUN drives.(DCSG01309777 (Port Of EnhancementRequest DCSG01536664)
-Support for PCIe RefClk override feature for OEM disablement.(DCSG01545925 (Port Of EnhancementRequest DCSG01689255)
-Display empty array for dedicated spare drives and operations for JBOD volumes when RDE GET is issued..(DCSG01460218 (Port Of EnhancementRequest DCSG01462974)


Version 52.27.0-5215 - Moderate Impact/Low Probability of Occurrence
-------------------
    BIOS:7.27.00.0
    UEFI Driver:0x071B0200
    HII: 07.27.04.01
    MR FW:5.270.02-3950
    package52.27.0-5215

Possible division or modulo by zero in enclosure management code.(DCSG01224310
HBA discovery failed with Phase 24 Storelib and StorelibTest(DCSG01207008
7.23 PA1: Data abort very early Start of Day(DCSG01225578
MegaRAID 7.23: Firmware continuously logging "PESTATUS_DEVHANDLE_OUT_OF_RANGE" during crash dump(DCSG01288261
Firmware reports dual ports for SATA drives.(DCSG01352291
Fix for the MPB test(DCSG01209348
Hardware Workaround:Link between Controller and expander not always recovering after link reset(DCSG01196230
Locate LED operation does not work for NVMe drive slot on UBM backplane(DCSG01230479
Same slot number is assigned to x1 link width drives connected to consecutive controller PHYs when an I2C backplane detection fails(DCSG01375808
Firmware is not incrementing the DFC Change Count value when there is a DFC change detected by the firmware.(DCSG01287092
SPILIB2: AutoStore command causes NVSRAM to ignore write enable comand(DCSG01218898
Secure Boot: Key mismatch error after FW image with 3K SHA3 256 w/0 ASN1 Header(DCSG00987745
MR_7.24: firmware fault on 9560 megaraid card upon malformed sense command(DCSG01331157
Too much text returned for TTY Read(DCSG01373054
[Aero/Ventura] Add check for Sense Data size(DCSG01178348
Build all failed on firmware tip code(DCSG01381053
LBA information missing from sense data with Medium Error Sense Key for SATA drives.(DCSG01183332
Export security does not work(DCSG01350835
Series 96xx: RMC SPI1 interrupt may assert when workaround is removed(DCSG01254315
Certain DS spin up sense codes are not filtered even with filtering enabled(DCSG01253216
MR7.24 Excessive prints while IO's are running(DCSG01339937
Enable encryption command enables security on multiple drives(DCSG01346635
While setting WCE(Disk Write Cache)=0 for JBOD; Firmware throws error mode_sense_10 buffer requested 400 but available 4, command failed.(DCSG01365204
MegaRaid7.23: firmware hit assertion failure memory.h at line 447: isInAddressibleRange(physAddrLow)(DCSG01310030
Fix inconsistent delimiter in Megamon command(DCSG01328543
Use correct flags in mbedTLS build for PEX89000(DCSG01317350
Uninitialized scalar variable access in UBM Backplane management and I2C driver code.(DCSG01339421
PCI slot and host serial number is set to default values.(DCSG01188813
NVMe Encapsulated MPI command not failed when it is blocked by IO Unit Page 13.(DCSG01294635
Continuation of defect 1304319 around unexpected system restart. Use this to further polish/harden the solution.(DCSG01328744
Update M.2 boot PSOC v1.17 caused Firmware hit ERROR: Exception Handler Called(DCSG01239775
IT controller firmware sending MCTP version numbers in reverse order(DCSG01234654
Aero: Incorrect topology phys memory allocation(DCSG01185588
Reading IO Unit Page 13 returns junk data(DCSG01292339
Fix controller info on NVMe Clock mode support when in SAS SATA only profile(DCSG01321714
LSA 7.23: Rebuild background operation progress bar disappears only after manual refresh.(DCSG01262337
C0:[141]:[Error] Signing Buffer Failed Sts:2 mesg after import successfully the certificate and reboot(DCSG01270486
Self test aborts when Open Zone command issued on a Security locked drive(DCSG01194141
Fix too much OOB debug prints in the firmware log in iMR(DCSG01232395
Fix print statements in some debug firmware(DCSG01324759
Storcli hangs with no output after running script cleaning up debug variables.(DCSG01341519
Io Unit Control with Remove device fails if MPI function blocking is enabled. IO Unit Page 13 is writeable.(DCSG01270812
Phase 24 Code analysis tool Defects related to SPDM(DCSG01224346
[SATA] SATA Initialization fails on certain large capacity SATA drives(DCSG01194600
Fix underflow in print firmware(DCSG01353729
Update copyright information in the header file.(DCSG01266013
QErr value in Control mode page for NCQ SATA devices is set to 0 instead of 1.(DCSG01375632
Fix the size expression in a profile debug function(DCSG01272481
Fix Inconsistency in delimiter usage in mfc print(DCSG01328526
7.23 Alpha: BGOps appear to not be monitored properly(DCSG01285341
Build all failed on firmware tip code(DCSG01343959
Foreign Config import Error message not proper in HII(DCSG01089538
Rebuild did not start on dedicated hotspare when one member drive was failed(DCSG01320150
[SATA Only] NCQ Errors observed with running Read/Write IOs along with SCSI Unmap to SATA drive(DCSG01254091
MegaRAID 7.23: Running get snapdump and delete snapdump simultaneously (get snapdump first, immediately followed by delete) causes a get failure(DCSG01248884
Flash / upgrade from Release Order Package 4567 to Release Order Package 4601 failed on JBOD mode Ctrl (profile = 20)(DCSG01312941
Firmware was not repairing an NVMe drive with detached Inactive Namespace.(DCSG01321255
SAS drive keeps failing SCSI TUR with Check condition due to Controller not sending Periodic Notify (Enable Spinup)(DCSG01232852
Preboot Trace Buffer (PTB) disable operation fails in preboot application HII(DCSG01186641
BST Failure: Buffer Overflow Assertion During TTY Retrieval(DCSG01233951
Found PR not paused when scheduled consistency check starts(DCSG01292937
Disable SATA protocol when in optical mode(DCSG01194126
PSOC details are displayed with discrete logic iMR controller(DCSG01359864
9500 Series- host with eight PHY controller hangs during warm reboot(DCSG01289054
SPILIB2: Series 9700 Chip Select Timing registers default to zero(DCSG01182027
Drive stays in UBAD state when doing running drive insertion/removal test(DCSG01349665
BST Failure: Exception During 95xx Cache Offload BST(DCSG01236056
Fix wrong drive temperature information on SATA drive models that do not support temperature reading(DCSG01265562
Cache offload power and time values updates for 8G controller(DCSG01195653
Filter extra error message for frame allocation(DCSG01311743
NVMe device connected to PCIe switch is not discovered by controller firmware on boot up(DCSG01260624
Import certificate slot chain operation fails on SPDM enabled controllers(DCSG01200707
REST client does not reflect the latest drive firmware version after firmware update(DCSG01225086
On eight PHY SKUs, Firmware should disable PCIe packet processing for second SAS/PDB core.(DCSG01304303
Clean does not remove signing artifacts(DCSG01360624
Firmware console command 'pl eminfo' shows no PCIe support for a PCIe supported UBM backplane Device Face Connector.(DCSG01285442
Uninitialized pointer access in UBM Backplane management code.(DCSG01225064
Confusing ETTY prints near controller reset while creating R5 virtual disk with three drives(DCSG01383891
Build all is failed due to Error: NVDATA Major Versions do not match!(DCSG01258017
Missing stack frames when an exception occurs(DCSG01371672
MR_7.23: Storcli event during firmware upgrade needs correction.(DCSG01228280
Data Corruption observed when diagnostic register dump is performed while running IO to the drives.(DCSG01227332
[NVMe] Mode F Firmware download to certain NVMe drives fails.(DCSG01286617
Fix drive link speed reporting due to the fact that drive negotiated down link speed after initial link up(DCSG01288864
Missing fields in Manufacturing Page 7 in Snapdump(DCSG01321763
Running show security SPDM cmd failed(DCSG01349508
MegaRAID 7.22: Trying to validate DCSG01234817 and seeing similar issue and a hard hang(DCSG01363017
Target mode controller port width degrades following host resets/power cycles with autoport config disabled(DCSG01325599
Fixes for the TTY Replace test case(DCSG01249618
PEX89000: Do not use use_frame_pointer compiler flag mbedTLS compilation(DCSG01282885
Firmware summary notes needs to be updated to remove 94xx boards references(DCSG01271551
Drive running sanitize overwrite becomes UBUnsp after a cold boot(DCSG01174553 (Port Of Defect DCSG01270388)
Controller cache has been lost seen during Cache Offload Loop test(DCSG01108247 (Port Of Defect DCSG01166476)
Assertion when playing copyback Write Journaling entries on warm reboot(DCSG01310309 (Port Of Defect DCSG01314116)
[NVMe] Some NVMe drives do not link up on certain OEM backplanes.(DCSG01193134 (Port Of Defect DCSG01196465)
MegaRaid7.23: firmware hit assertion failure memory.h at line 447: isInAddressibleRange(physAddrLow)(DCSG01310030 (Port Of Defect DCSG01322278)
During OCR, a snapdump was generated by FW due to "Assertion failure in fw\hw\pbam\serial.c at line 2413: IntNesting==0"(DCSG01175907 (Port Of Defect DCSG01176190)
MegaRAID 7.22: Trying to validate DCSG01234817 and seeing similar issue and a hard hang(DCSG01363017 (Port Of Defect DCSG01364478)
Foreign Config import Error message not proper in HII(DCSG01089538 (Port Of Defect DCSG01301413)
for JBODs, not setting physical drive state change committed bit in NVRAM.(DCSG01285247 (Port Of Defect DCSG01351187)
MR_7.24: firmware fault on 9560 megaraid card upon malformed sense command(DCSG01331157 (Port Of Defect DCSG01351139)
While setting WCE(Disk Write Cache)=0 for JBOD; Firmware throws error mode_sense_10 buffer requested 400 but available 4, command failed.(DCSG01365204 (Port Of Defect DCSG01365379)
While generating the snapdump, firmware hit the data abort exception(DCSG01216058 (Port Of Defect DCSG01351468)
Flash / upgrade from Release Order Package 4567 to Release Order Package 4601 failed on JBOD mode Ctrl (profile = 20)(DCSG01312941 (Port Of Defect DCSG01316809)
While setting WCE(Disk Write Cache)=0 for JBOD; Firmware throws error mode_sense_10 buffer requested 400 but available 4, command failed.(DCSG01365204 (Port Of Defect DCSG01365380)
Storcli hangs with no output after running script cleaning up debug variables.(DCSG01341519 (Port Of Defect DCSG01358591)
Firmware crashes after reconstruction completes and IO running(DCSG01292231 (Port Of Defect DCSG01302229)
IOC Page 7 does not report the updated "SASNotifyPrimitiveMasks"(DCSG01220829 (Port Of Defect DCSG01222353)
SATA, Fault 0x5919 seen during write same error and task managements(DCSG01176562 (Port Of Defect DCSG01228270)
Drive stays in UBAD state when doing running drive insertion/removal test(DCSG01349665 (Port Of Defect DCSG01372497)
Controller fault observed while running cache offload cycles with heavy IOs(DCSG01342893 (Port Of Defect DCSG01351132)
Erase operation fails on OEM specific UBM backplane during UBM controller firmware update.(DCSG01289710 (Port Of Defect DCSG01294066)
Direct attached devices do not link up in case SEP backplane detection is configured in NVData(DCSG01285763 (Port Of Defect DCSG01286648)
Revert SATA Init timeout changes(DCSG01252414 (Port Of Defect DCSG01255751)
Firmware flash followed by expander reset hit the Exception(DCSG01234817 (Port Of Defect DCSG01351403)
Change spinup mode while SATA link reset is occurring(DCSG01161733 (Port Of Defect DCSG01231494)
Firmware crashes after reconstruction completes and IO running(DCSG01292231 (Port Of Defect DCSG01301299)
Update NVDATA Major version(DCSG01258013 (Port Of Defect DCSG01270040)
NVMe response buffer differs from host for get smart health information(DCSG01118222 (Port Of Defect DCSG01376667)
For un-configured bad foreign drive import and clear option buttons are visible in application(DCSG01315519 (Port Of Defect DCSG01351156)
Sanitize (Block Erase) along with shutdown sequence caused assertion in firmware. (NVMe Only)(DCSG01358573 (Port Of Defect DCSG01371174)
Assertion when playing copyback Write Journaling entries on warm reboot(DCSG01310309 (Port Of Defect DCSG01314121)
Assertion failure seen when expander resets and phy on & off executed in loop(DCSG01192071 (Port Of Defect DCSG01351484)
M.2 NVMe drive initialization failed after warm reset(DCSG01264359 (Port Of Defect DCSG01301951)
[VSes] Number of slots reported incorrectly in certain OEM backplane.(DCSG01200427 (Port Of Defect DCSG01215896)

Firmware: Add DFT for Improve R1 Clustered Medium Error handling(DCSG01232890
Use finalize bit hardware capability to generate SHA(DCSG01265112
Implement incomplete firmware handlers for the SCSI commands as per the latest SCSI NVMe Translation Layer spec - V1.08(DCSG01308277
Reduce On-Chip Memory Usage: NVME(DCSG01338107
Handle SED drive state when the drive get into AUTHORITY_LOCKED_OUT(DCSG00966551
Add new interface APIs to Secure Boot Library(DCSG01099719
Add PEX89000 build support for libmbed tls.(DCSG01175822
SPILIB2: Add interrupt disable and clear to all init paths(DCSG01235869
Update Enterprise Key Management KEY FAILURE boot message description(DCSG01321257
SBLIB: Add interface APIs to support Security Version(DCSG01239235
Added support for Extended Linear Address in hex image parsing for UBM6 backplane firmware update(DCSG01218275
Add an API to format the ETTY to a buffer(DCSG01208404
Updated release scripts for verifying Firmware build status(DCSG01350607
Fix GET MCTP VERSION Response to Invalid Message Type Number(DCSG01207379
Add support for PCI Ids of OEM controllers(DCSG01218309
Handle interrupted TTY reads when TtyLogInFlash is disabled(DCSG01245875
SPILIB2: Add FRAM support(DCSG01245618
TLER (Time Limited Error Recovery) for MR7 Controllers(DCSG01063803
Messages does not differentiate in Device Manager Retry command for success and failure conditions(DCSG01320346
Code Coverage Improvement: add the semaphore tests to BST(DCSG01270488
Aero - SecureBoot: Added debug messages to the ring-buffer when the FW download operation fails(DCSG01132478
Implement PCIe reference clock control in applications.(DCSG01232265
Code Coverage Improvement: Firmware changes to add Random Number tests to BST(DCSG01273668
Reduce On-Chip Memory Usage: AES(DCSG01345551
Reduce On-Chip Memory Usage: Megamon(DCSG01334551
SPDM 1.1 : Upgrade to MbedTLS version 2.26.0(DCSG01060374
Discontinue Firmware Release for 94xx Series of chips(DCSG01240537
Add support for OEM target for including the latest sblib(DCSG01263709
Updated Package build option in release scripts(DCSG01360774
Enhance RMC log parser for new reference clock timeout(DCSG01315146
Adding a print string when LED blink status is set to BAD(DCSG00927793
Firmware: With TTYloginflash disabled, provide the eTTY log when the user requests for the term log(DCSG01187516
Qualify OEM BiCS5 flash devices for cache offload functionality(DCSG01311375
SPILIB2: Integrate new 9700 series headers and add support for FRAM(DCSG01292279
Add new event for Physical Disk link speed change.(DCSG01327217
Reduce On-Chip Memory Usage: Hardware Tests(DCSG01334967
Reduce On-Chip Memory Usage: Diagnostics(DCSG01336164
Firmware: Make autorebuild behavior consistent for end customers(DCSG01240282
Add support to change Enterprise Key Management support through command line(DCSG01155012
Modify the cache offload memory layout to support future NAND parts(DCSG01363836
Add Dummy Part Number Image to Catalog for Old 15987 Part Number PSoCs(DCSG01373884
SPILIB: 97xx - Change dummy byte value to 0xFF's(DCSG01216772
Reduce On-Chip Memory Usage: Embedded CPU Debug(DCSG01334173
Reduce On-Chip Memory Usage: Disk Encryption(DCSG01336490
Enhance Reconstruction error handling to avoid crash with invalid physical drive(DCSG01368554
Make adjustments for TTY Clear when TTYloginflash is disabled(DCSG01225741
Improve RLM operation time when no host IO activity is on going(DCSG01186257
Use event based wait for browser automation during release process(DCSG01133010
Added Enable Enterprise Key Manager Support bit to MegaRaid CTRL_PROP(DCSG01208216
SBLIB: Clean up code for external use(DCSG01150489
Reduce On-Chip Memory Usage: Snapdump(DCSG01333402
Enhance SuperCap Relearn Logic to Not Prematurely Set App Learn Failures and Timeouts(DCSG01383159
Firmware: Enhanced NVMe Recovery Process(DCSG01220515
Add compiler version checking to the MegaRAID firmware build(DCSG01278550
iMR Snapdump: include Megamon commands in TTY Log(DCSG01365338
Adjust comment entry to match API changes(DCSG01229786
Firmware: SPDM Support for 954x boards(DCSG01311369
Update SPI Lib to latest(DCSG01215946
[Code Coverage] Include CTC files in firmware code and create a build type that includes CTC code.(DCSG01132120
Reduce On-Chip Memory Usage: Enclosure(DCSG01345411
Reverting changes from ER DCSG01155012(DCSG01248730
Firmware: Improve R1 Clustered Medium Error handling(DCSG01187519
SBLIB: Add all OID compatibility algorithm to Avenger build(DCSG00346387
SPILIB2: Change build options to match firmware options(DCSG01171492
Add support for OEM UBM backplane(DCSG01209669
Add IO Unit page 13 handling to Block/Allow MPI functions(DCSG01214245
Reverting API change for external key management feature enable/disable support(DCSG01248890
Add a generic event to identify the reset type(DCSG01344405
Add Firmware Version 4 for PartNumber 15463 to PSoC Catalog Image(DCSG01378374
API change to add more Enclosure subtypes to support OEM backplanes(DCSG01209717
Comment changes for TTY Replace(DCSG01272267
Code Coverage: improved error handling when dumping counters(DCSG01224606
Re-enable SPILIB2 and Fix MPB Erase Issues(DCSG01200182
Reduce On-Chip Memory Usage: Constants(DCSG01342382
SBLib: Add API to discern whether the EFUSE is full(DCSG00989785
Code Coverage Improvement: add an ETTY test case(DCSG01356753
Firmware: Implement REFCLK control in HII(DCSG01291368
Capture Event info as a part of Snapdump(DCSG00965557
Reduce On-Chip Memory Usage: Strings(DCSG01337295
MegaAPI: Add API Controller Properties for overriding slow array thresholds(DCSG01288908
Build Improvement: clean needs to apply to debug builds as well(DCSG01300541
[SNTL] Update SCSI Format Translation for NVMe devices(DCSG01137935
Add Firmware Version 19 and 18 for New OEM PartNumbers 29652 and 32052 to PSoC Catalog Image (Part 2)(DCSG01350841
PLDM - Add UBM firmware update changes under the compilation macro(DCSG01250826
Update Aero iMR/MR to the latest secure boot library(DCSG01198693
Leverage Driver Dump Mode bit in MFI_CAPABILITIES to determine if host is in dump mode(DCSG01344379
Add custom change number to MBEDTLS to track which version is in use.(DCSG01267947
Aero FW-Download: when writing bootloader to the main region, write the signature bytes last(DCSG01154887
OOB Debuggability improvement(DCSG01194531
Add Capability Bit for Driver Dump Mode Status to MFI_CAPABILITIES(DCSG01321223
Code Coverage: build changes to verify that supported tools are being used(DCSG01254595
SPILIB2: Read the ISSI function register on init to detect incorrect configurations(DCSG01288804
Unexpected Sense Codes related to Dimmer Switch should not be logged in cases where FW has spun down PD(DCSG01171916
PL Firmware: SFF-TA-1005 Version 1.4 Support(DCSG01214256
Added a generic event to identify the reset type.(DCSG01315620
API change for Implementation of PCIe reference clock control from applications.(DCSG01286990
Code Coverage Improvement: clean up dead code in TTY and timer files(DCSG01269785
Support SPDM v1.0 for OEM controllers(DCSG01135013
Reduce On-Chip Memory Usage: I2C(DCSG01345439
Firmware: Add a SAS/SATA only profile(DCSG01311360
Revert Port Name Changes in Redfish Events(DCSG01187327
Fix Part Number Header Verbiage(DCSG01375705
Add Electrical Information to Cache Offload Info Dump(DCSG01327220
Generate a link speed change event for drives when the initially negotiated link speed gets changed(DCSG01348250
Firmware: Support Long Lock Delay Times when Negotiating to a 6G SATA Drive at 3G(DCSG01253833
Add Firmware Version 18 for PartNumbers 29211, 29651, and 29810 to PSoC Catalog Image(DCSG01345892
Removed OEM specific code(DCSG01187339
Handle PD Manual Status change while BGI/CC/INIT is active/Paused and adjust consistency status of LD(DCSG01188329
LED updates and VSES commands from host are blocked during UBM BP Firmware update(DCSG01187546
Enhancement in preserving NVRAM settings in snapdump(DCSG01289418
Upgrade ARM compiler version(DCSG01331364
SPDM library: Add support for SPDM v1.0(DCSG01137730
Update SB Lib to latest(DCSG01224363
Capture additional controller info in Snapdump(DCSG01327223
Improve iMR null pointer handling so that exceptions are generated(DCSG00996946
SPDM: Upgrade the latest SPDM Library in PH26(DCSG01219141
Add ApSHA changes(DCSG01209350
Capture physical drive and logical drive allowed operations in Snapdump(DCSG01327224
Add new feature to enable or disable slow array logic in firmware(DCSG01272081
Add Firmware Version 17 for PartNumbers 29211 and 29651 to PSoC Catalog Image(DCSG01314019
Reduce On-Chip Memory Usage: Drive Performance Monitor(DCSG01333825
Enable DS event filtering in firmware based on filterDSSpinUpEvents NVDATA setting(DCSG01226496
PL firmware workaround for UBM Backplane firmware flashing issue in OEM specific Backplane(DCSG01237118 (Port Of EnhancementRequest DCSG01252393)
PL: Enable the UBM firmware update support for OEM specific UBM backplane.(DCSG01233264 (Port Of EnhancementRequest DCSG01252355)
Firmware: Add a SAS/SATA only profile(DCSG01311360 (Port Of EnhancementRequest DCSG01378362)
IOP: Rework MCTP packet validation code for workaround for some multi-segment servers(DCSG01289379 (Port Of EnhancementRequest DCSG01328386)
[9500] Add support for host phys/lanes in Port Status Green GPIO(DCSG01207029 (Port Of EnhancementRequest DCSG01251940)
Add support for new product specific MCTP Event(DCSG01149990 (Port Of EnhancementRequest DCSG01268764)
Enhance Reconstruction error handling to avoid crash with invalid physical drive(DCSG01368554 (Port Of EnhancementRequest DCSG01370842)
Add support for OEM specific SAS 4 expander based enclosure with 950x controllers(DCSG01351490 (Port Of EnhancementRequest DCSG01363691)
Fails controller firmware download if detect wrong type(DCSG01516427
3808N should block hotspare option in LSA(DCSG01509009
Assertion failure seen in Firmware timer module(DCSG01503334
[9500] SAS_IO_UNIT_CONTROL/SEND_PRIMITIVE command fails for the phys with PCIe support enabled(DCSG01467130
Critical boot message allows the user to add unneeded input(DCSG01422026
Enable Security and controller IO MFC settings for the new boot contoller(DCSG01471837
Maximum spans per virtual drive incorrect(DCSG01516607
Fix the hanging of NVMe passthrough command when request is too big for the controller to handle(DCSG01435858
Fix Ses device not ready handling path(DCSG01489595
Controller diag firmware changes from Apps DF: DCSG01444219(DCSG01450318
Controller dies after running Snapdump in a loop with 23 nvme drive R5 and IO stress(DCSG01467624
MegaRAID 7.25 Beta-Assertion failure in ddf module(DCSG01454893
Constant add/delete of R0 and then power off enclosure causes data abort(DCSG01510133
Observed hang in SAS only and NVMe only mode in 3808N controller after adapter reset.(DCSG01508452
Drive Gets Marked Bad During Reset Test(DCSG01540194
PL Firmware : SAS Phy Page 0 is not showing correct values when vses disabled(DCSG01496873
7.26: Firmware found Enclosure exceeds max supported, caused KA on M.2 Ctrl(DCSG01471791
Cache Bypass Modes shown on iMR when there is no write back possible(DCSG01511102
Task management failure and assertion seen during hard reset test on JBODs(DCSG01531972
Snapdump missing driver.rtt in 7.25(DCSG01409831
OOB Firmware Flash Fails(DCSG01588333
7.27 3808N: Data abort exception during media error injection test with 4k drives, system can't boot since OS behind controller as well(DCSG01539651
New events are not handled when downgrading to 7.24 code(DCSG01430399
Set jbod shows successful, but jbod does not appear to be created(DCSG01449669
MegaRAID 7.25 Alpha: performance drop up to 6 percent observed(DCSG01410110
VMware OS reported IOMMU Fault iMR controller while running virtual machine IOs VM and controller reset(DCSG01525592
fix excessive unlocking of secured drive when clearing drive restricting(DCSG01511337
Fix On demand snapdump not working on one setup with iMR(DCSG01441330
Backend PCIe: ED91 fault on hot reset(DCSG01520805
9500 Series: Fault 0x5805 Invalid Message Frame Index Seen after multiple resets(DCSG01516095
[HBA 95xx]: Set LSI-bit to one in the Device info field for Broadcom expander device type(DCSG01418828
7.27 PA1 - 3808N: cant set ctrl properties via storcli(DCSG01506471
Continuous MCTP command failure with a bad drive in topology leads to controller not being detected through MCTP over I2C on OEM config(DCSG01516217
[95xx]: Log sense page 0x15 fails on ACS-5 supported SATA drive.(DCSG01458189
Commands Failed on NVMe Drives(DCSG01574223
[95xx] NVMe Drive firmware update failed if the drive firmware payload size is more than 2Mb and 32k aligned(DCSG01531437
Fix compilation for different targets(DCSG01455484
Fix the device interface value for SAS connection(DCSG01436582
PLDM Firmware Download: Assertion failure in ..\cpu\arm\exceptions.c at line 1046 on triggering QueryDeviceidentifier command in Download state(DCSG01488473
Set batterywarning succeeds on narrow controller which does not support battery(DCSG01548367
7.26 PA2: crashdump.txt is taking longer than 15s to generate for ondemand snapdump(DCSG01468284
Firmware Exception during IO with JBOD Cable Pulls(DCSG01476347
7.27: Drive Pull R1 Hits Exception Handler Called Error(DCSG01505033
3808N: 7.27: firmware hitting kill adapter during logical drive check consistency(DCSG01546055
zip file created in response to zc megamon command is corrupted(DCSG01516045
Firmware retries forever when the Write Same command to the DDF region has 5/24/00 check condition(DCSG01396643
Fix set PCIe lane speed without checking phy validity(DCSG01559620
7.26 PA2: some Snapdump prints flood the uart(DCSG01469813
Fix snapdump being interrupted due to the time of searching through events(DCSG01487334
Firmware hit an error exception after downgrade(DCSG01381367
Manual Crash Dump fails when iMR N card is in the test-configuration.(DCSG01522625
Assertion failure noted in timer module : further root cause of DF: DCSG01437689(DCSG01504986
Fix controller setting for support for capacity expansion without adding disks(DCSG01516125
7.27 Beta: drive not seen in storcli after quick pull push with IO and rebuild going on(DCSG01556598
Fix I2C OOB processing null pointer due to I2C reset(DCSG01469541
First time data capture trigger time properties print change(DCSG01547753
UseIdleSas12G was not set in Hardware even when it was set in the ExtManPage40(DCSG01517111
Assertion failure noted in timer module during SATA pass through and IOs test over 2 days(DCSG01437689
CRC failure on modules captured under snapdump(DCSG01567599
Event causing automation script to fail(DCSG01417654
Wrong Check Added by ER DCSG01558994 for Disabling SAS on 3808N(DCSG01573644
Drives Show up as UGUnsp(DCSG01539401
Fix the unwanted blocking of reverting of a hot spare drive after copy back(DCSG01440304
Kill adapter during firmware upgrade and Downgrade with IO.(DCSG01489940
Fix unwanted warning message of debug flag(DCSG01552620
When slot is set to non installed firmware does not report enclosure slot bad status(DCSG01506370
Fix the configurable Physical Disk count issue(DCSG01510048
Fix the performance drop due to code change(DCSG01507280
94xx/95xx PL Spinup: Incorrect write to register to clear the spinup interrupt(DCSG01521501
Fix discardcache behavior for deleting Virtual Disk(DCSG01399246
Change the new M0 code version(0x6C30) in version control file.(DCSG01550876
7.26: 3916N partition failed when create raid 0/1 using NVME drive(DCSG01490785
[95xx]: Incorrect slot number management for non-UBM backplanes(DCSG01451450
Fix Channel compilation due to OEM changes(DCSG01458287
BMC reset in a loop leads to controller not being detected through MCTP over I2C(DCSG01460317
PLDM Flashing Exception(DCSG01561751
SLT-Emulator2.0-OOB option all is not showing valid information(DCSG01419594
MR7.25 Alpha-Suppress continuous Snapdump prints-GET SD PROP(DCSG01411157
Simultaneous Read/Write Miscompare: Data Read Does Not Match Data Written(DCSG01523599
EDSFF drive in UBM will not link up and Change Detect polling may not happen for some UBM controllers.(DCSG01417264
Build all failed on firmware int code(DCSG01538008
Incorrect License Options(DCSG01516158
Reverting CSET DCSG01446605 Port of Defect DCSG01234817: EGS:540-8i -ERROR: Exception Handler Called for Processor Core = 0 observed(DCSG01452163
MegaRAID 7.26 Alpha: Data abort during unexpected power loss test with copy back(DCSG01481110
Spinup failed drives (Bad drives) are not seen in LSA/CLI Tool(DCSG01442264
SCSI Self-Test Results (0x10) log page not updating status when self-test in progress(DCSG01072582 (Port Of Defect DCSG01466802)
Pulling low power mode NVMe drive causes PL Fault(DCSG01542341 (Port Of Defect DCSG01550338)
A target reset Task Management to a direct attach SAS drive may not go out to the drive even though PL thinks it has(DCSG01419839 (Port Of Defect DCSG01432770)
Consistency check and patrol read execution frequency is not been set to new values after firmware upgrade(DCSG01377888 (Port Of Defect DCSG01446598)
PL firmware not failing NVMe self-test when already an existing NVMe self-test command is in progress(DCSG01350001 (Port Of Defect DCSG01459189)
Strocli show command displays incorrect number of physical drives count(DCSG01293599 (Port Of Defect DCSG01446601)
Code compilation is failing with latest oob_common baseline and 7.22 firmware code(DCSG01357396 (Port Of Defect DCSG01446599)
VSES Commands hung during the drive pull test with IOs.(DCSG01480400 (Port Of Defect DCSG01496941)
Rekey fails when switching from Local key management to Enterprise Key Management(DCSG01420853 (Port Of Defect DCSG01430110)
Firmware crashes when reading the UBM controller information when the UBM controller is in non operational mode.(DCSG01507596 (Port Of Defect DCSG01518264)
SL OOB: NVME response buffer is not displaying user requested size of response buffer.(DCSG01151757 (Port Of Defect DCSG01453826)
PL Fault During IO and Driver Load/Unload(DCSG01488049 (Port Of Defect DCSG01535385)
OOB SL\SLT NVMe Passthru : NVMe response buffer differs from host for get log information command for NVMe drives(DCSG01147859 (Port Of Defect DCSG01446611)
Enclosure location is showing as "Internal" in LSA for Vses(DCSG01245355 (Port Of Defect DCSG01446602)
Non 512 Mutiple ReportZone request cause 0 data transfer but completes successfully.(DCSG01467889 (Port Of Defect DCSG01481561)
During AC Power Cycle Test, I2C Error Occurs(DCSG01464314 (Port Of Defect DCSG01560539)
Copyright year needs to be corrected in ROC firmware print.(DCSG01396947 (Port Of Defect DCSG01446596)
Unconfigured Bad SAS SSD drive is showing Media as HDD in LSA/Storcli(DCSG01196368 (Port Of Defect DCSG01446606)
[95xx] - Slot numbering for NVMe devices connected behind an invalid backplane shown as slots 0 and 4 whereas it is expected to be 0 and 1(DCSG01436490 (Port Of Defect DCSG01442157)
Rekey fails when switching from Local key management to Enterprise Key Management(DCSG01429822 (Port Of Defect DCSG01430111)
Buffer overrun on Request Sense to an NVMe device(DCSG01425345 (Port Of Defect DCSG01428721)
Firmware flash followed by expander reset hit the Exception(DCSG01234817 (Port Of Defect DCSG01446605)
Overnight reading the snapdump OnDemand in a loop, caused iMR Controller not found error(DCSG01470476 (Port Of Defect DCSG01496925)
Direct attached Lane break test failed on Gen4 NVMe U.2 drive(DCSG01556638 (Port Of Defect DCSG01567886)
Virtual SES IOs aren't failed if a UBM I2C transfer error occurs during LED update(DCSG01486559 (Port Of Defect DCSG01487551)

iMR Snapdump: reduce the size of NVRAM_MODULE.txt(DCSG01390740
Needs Key Event has extra garbage data at end buffer occasionally causing issues with applications reading event(DCSG01403910
iMR Snapdump: reduce memory usage in SMID dump(DCSG01385736
Add PERST control for NVMe drives(DCSG01400120
[9500 PL] Add addition debug data on detecting Link Hang interrupt(DCSG01376930
Improve enable JBOD mode handling to support up to 63 JBODs on toggling the setting(DCSG01409829
iMR Snapdump: Support multiple Snapdumps(DCSG01365345
Debug variables declaration improvement(DCSG01366579
3808N: Power customization for Generic and OEM specific profiles(DCSG01537426
3916N: Re-enable Full DDF(DCSG01488467
IT Firmware: Increase number of "AllowedFunction" entries in IOUnitPage13 from 20 to a higher value.(DCSG01388196
Increased SATA Initialization timeout and made it configurable by NVDATA(DCSG01383806
Firmware: Production of iMR on 3808N without host memory dependency.(DCSG01454043
Key needed event generated when inserting external foreign locked disk when controller is in local key management mode(DCSG01403911
Firmware: Improve MR7 R0/R1/R10 overlapped write handling(DCSG01427187
7.x - OEM specific custom build target environment addition(DCSG01533403
iMR Snapdump: reduce the size of HWREG.txt(DCSG01390824
POC: New profile and licensing control & display for the new boot controller(DCSG01373026
Enable PCD eFuse Runtime Check for 3808N(DCSG01571660
Support controller firmware download without using host memory(DCSG01480248
3808N: Cross Reference Architecture Spec Enabled Features with Latest PoC Code(DCSG01488468
Build Improvement: clean needs to apply to temporary Scons files as well(DCSG01395418
iMR Snapdump: truncation handling(DCSG01392269
iMR Snapdump: reduce the size of ENCL_MODULE.txt(DCSG01399676
Updated Firmware to support SCSI to NVMe Translation Spec 1.10(DCSG01521548
Block the access to disabled Hardware cores on 3808N adapter while dumping pl dbg.(DCSG01515787
iMR Snapdump: reduce the size of event_dump.txt(DCSG01379668
Firmware: Ensure that IT firmware can not run on the 3808N(DCSG01494307
3808N make firmware changes for new architecture specification updates(DCSG01505532
Improve Copyback disable handling while copyback is in progress on drives(DCSG01459879
Firmware:9540N POC: memory and DDF management changes(DCSG01377905
iMR Snapdump: reduce the size of tlb_page_pool_dump.txt(DCSG01379494
PL: Add NVDATA switch to apply new NVMe Clock out setting for MegaRaid 9560 controllers(DCSG01383812
iMR Snapdump: reduce the size of crashDump.txt(DCSG01383322
iMR Snapdump: reduce the size of CFGI_MODULE.txt part 2(DCSG01399684
Snapdump: Add reason codes when clearing(DCSG01470940
iMR Snapdump: use static memory in display bytes functions(DCSG01390241
iMR Snapdump: reduce the size of crashDump.txt part 2(DCSG01403136
iMR Snapdump: Support multiple Snapdumps -- NVRAM(DCSG01399615
Update linkspeed and device speed usage for SAS4 drives/connections(DCSG01388207
iMR Snapdump: use zip file trailers(DCSG01409736
Updated 'Summary Release Notes' document(DCSG01521495
Disable SAS on OEM Boards(DCSG01558994
Add Firmware Version 28 for PartNumber 15987 to PSoC Catalog Image(DCSG01488430
iMR Snapdump: reduce the buffering for Driver.rtt(DCSG01409902
Firmware: Enhance iMR JBOD power cycle handling when the JBOD on/off duration is shorter than HDD drive spin-up time(DCSG01359233
Series 95xx POC: Remove host memory with SnapDump(DCSG01365348
Option to disable MegaRaid volume target identifier availability cool off period(DCSG01394603
Power customization support for SAS3808N board.(DCSG01453955
[95xx] Added feature to override the firmware control of PERST# signal to NVMe drives using NVDATA.(DCSG01421204
Support Drive firmware download without using Host Memory(DCSG01454021
Use dedicated resource for config page read(DCSG01315805
Turn Off Clock for CPU 1(DCSG01512673
Add support for OEM Backplanes(DCSG01418256
iMR Snapdump: reduce the size of CFGI_MODULE.txt(DCSG01391089
MegaRaid 7.27 Program - New release/build target addition for OEM specific program(DCSG01558739
Firmware: Enable Namespace management and attach/deattach in GCA for OEM(DCSG01377906
Add New Firmware Versions for OEM PartNumbers 15984, 29652, and 25934 to PSoC Catalog Image(DCSG01462382
[9500/02] Update Combo Serdes Wrapper M0 code(DCSG01431077
Add timer module debug functionality in Snapdump module(DCSG01464478
Added Serdes Config Parameters to ExtManPage40(DCSG01508464
iMR Snapdump: Verify that Snapdump and Uart have the same and appropriate prints around exceptions(DCSG01363854
iMR Snapdump: reduce the size of symbol_dump.txt(DCSG01412542
Update Secure boot Library in Firmware(DCSG01445968
iMR Snapdump: reduce the size of crashDumpHost.txt(DCSG01390271
iMR Snapdump: Handle garbled Uart prints while saving to flash(DCSG01393270
iMR Snapdump: reduce the size of NVRAM_MODULE.txt part 2(DCSG01395445
[9500 PL] Spinup handling when rising edge and falling edge spinup interrupts are set simultaneouly(DCSG01373049
Add new chip entry for 3808N controller.(DCSG01512905
Graceful failure of unsupported MR_DCMD_CTRL_ENV_GET_DATA(DCSG01371556
NVDATA switch to enable the PDB0B core for 3808 N controller(DCSG01551132
Optimize the default Consistency check and patrol read settings for decreasing the workload on drives(DCSG01339902 (Port Of EnhancementRequest DCSG01446594)
PL Firmware: Bring up of OEM specific EDSFF UBM Backplane.(DCSG01467248 (Port Of EnhancementRequest DCSG01498560)
PLDM library support on 95xx series iMegaRAID controllers(DCSG01176360 (Port Of EnhancementRequest DCSG01446608)
Map valid slots to its corresponding element index in subsequent MPI SEP request(DCSG01418309 (Port Of EnhancementRequest DCSG01420988)
LCS work around in PL firmware to be made generic for all models of an OEM specific UBM backplane.(DCSG01446403 (Port Of EnhancementRequest DCSG01452718)
Add support for 'Availability' state set for controller composite sensor(DCSG01458117 (Port Of EnhancementRequest DCSG01550225)
Bonham Enclosure Detection and Element Monitoring(DCSG01399576 (Port Of EnhancementRequest DCSG01407939)
NVRAM space to persist information related to certain Redfish Alerts(DCSG01481344 (Port Of EnhancementRequest DCSG01485849)
Support generation code feature in MPI SEP request handler(DCSG01417694 (Port Of EnhancementRequest DCSG01420969)


Version 52.22.0-5052 - Moderate Impact/Low Probability of Occurrence
-------------------
    BIOS:7.22.00.0
UEFI Driver:0x07160300
HII: 07.22.03.00
MR FW:5.220.02-3899
    package52.22.0-5052

Defects:
-Coverity defects fix..(DCSG00340836)
-Response of TransferComplete (0x16) become irrelevant if it is received after the successful completion of CancelUpdateComponent.(DCSG00033524)
-fixed the parameter difference for the PLDM Type 5 print framework..(DCSG00286651)
-PLDM Type 6: Incorrect error code returned for resource unregistration.(DCSG00067924)
-Conditional enablement infrastructure for PLDM Type 5 Downstream Device support for platform.(DCSG01172373)
-Updated the applyResult if the activation method is updated.(DCSG01062249)
-PLDM single firmware update logs multiple debug messages in controller trace buffer.(DCSG00258279)
-PLDM Type 5 - Fix observations of UBM Backplane Firmware Update.(DCSG01097986)
-PLDM Type 2 - Change debug print filter level to "Warning" for PollForPlatformEventMessage command.(DCSG00263767)
-Build error in PLDM Library on ARM 4.1 compiler with Atlas FW build environment.(DCSG00071478)
-Issue in freeing PLDM firmware update resources.(DCSG00317911)
-Invalid Completion code Error for running script-LearnComponentStateInvalidTransferFlagPLDMType5.py.(DCSG00149690)
-PLDM Type 6: BEJ buffer insertion pointer is not incremented when an element is added to array context.(DCSG00067926)
-PLDM Type6 : Change filename for fixing doxygen compilation.(DCSG00081863)
-OOB-MCTP over I2C - FW updates in Loop hits PLDM Fault 0x6.(DCSG00380088)
-PLDM Type5 : Controller FW Downgrade through BMC results in controller FW crash.(DCSG00095783)
-RDE - Controller information is not getting launched in REST client.(DCSG00099613)
-PLDM: Pass Timer-id that needs to be restarted to Pldm-timer-restart operation.(DCSG00018645)
-RDE: Valid schema class can't be more than 4 for 'GetSchemaURI' command.(DCSG00109749)
-PLDM Type 6: Fix "RedACT" tool reported observations.(DCSG00080427)
-PLDM RDE - MultipartReceive command fails with error INVALID_DATA for non-zero OperationID.(DCSG00165437)
-Doxygen build error.(DCSG00415793)
-Address the issues in PLDM type 2 event message supported implementation and PLDM type 6 etag population as part of RDE Operation.(DCSG01338519)
-PLDM Type 2: Resource associated major schema count is incremented incorrectly.(DCSG00074150)
-PLDM] IT HBA with latest PLDM library faults.(DCSG00102618)
-PLDM - Fix compilation errors reported in an OEM platform.(DCSG00382501)
-PLDM Type 2 - Fail module initialization if Managed Device invokes initialization API without allocating memory.(DCSG00360498)
-Build error in PLDM Library on ARM 4.1 compiler (done with Atlas FW code).(DCSG00019014)
-pldmFreeFwUpdtResources() doesn't frees RetryRqstTimer correctly.(DCSG00313887)
-PLDM Lib: Unable to stop timer (PLDM Fault 0x11).(DCSG00134602)
-PLDM Type-2 : GetPDRRepository command fails with large configuration (mulitple drives and volumes).(DCSG00097462)
-correct EstimatedTimeBeforeSendingRequestFirmwareData value is sent during UBM BP FW update.(DCSG01154630)
-Fix Coverity tool reported defects.(DCSG00266270)
-Assertion failure in fw\cpu\arm\exceptions.c at line 1006 on triggering QueryDeviceIdentifier command in Download State.(DCSG00337907)
-Fixed the bug in ApplyComplete command response in PLDM library..(DCSG01105456)
-RDE - GetSchemaURI and GetSchemaDictionary commands does not provide collection member URI/dictionary for schema class COLLECTION.(DCSG01285238)
-Do not process any response msg if FD is in PLDM_FW_UPDT_IDLE state.(DCSG00024158)
-During AC Power Cycle Test, I2C Error Occurs.(DCSG01464314)
-PLDM Type5 : Upgrade to the latest signed FW fails.(DCSG00076949)
-PLDM Type 5 - Request data ApplyResult of ApplyComplete command shall be 0 if the activation method is not modified.(DCSG01151200)
-Trigger script with PassComponentTable Command set to invalid Value led to rolling PLDM error messages.(DCSG00500454)

EnhancementRequests
-PLDM - Handle a TODO related to sensor re-arm unavailable in present state and update copyright year in all Type 2 files.(DCSG00404477)
-Added support for vendor defined descriptor.(DCSG01128947)
-Type 6 library module - RDE commands support.(DCSG01267444)
-PLDM Type 5 - Protect newly added features under a compilation macro.(DCSG01230358)
-PLDM Type 6: Add debug strings for Type-6 library.(DCSG00065842)
-FD should move to DOWNLOAD state immediately upon successfully sending the response of UDATE_COMPONENT.(DCSG00046402)
-PLDM: Implement Redfish PDRs and APIs.(DCSG00060505)
-Implemented BEJ decoding state machine in type 6 PLDM (RDE) library.(DCSG01260343)
-Implement event message supported, event message buffer size and platform event message for PLDM type 2 - monitoring and control.(DCSG00149551)
-Define Macros/inline functions.(DCSG00027051)
-Define APIs for PLDM debug infrastructure and Implements debug routine for PLDM Base.(DCSG00026992)
-Re-naming few functions in module-object-verb format.(DCSG00027061)
-PLDM - Add Linked List Traverse utility and correct TID API function.(DCSG00165389)
-Support for redfishTaskExecutedEvent.(DCSG01260904)
-PLDM Monitoring and Control: Addressed the Coverity reported issues and added abort function.(DCSG00342504)
-PLDM Type 5 - Add support for UBM Backplane Firmware Update.(DCSG01031964)
-Implement Debug routines for PLDM Type-5 Module.(DCSG00027039)
-Port changes from old db to new DB.(DCSG00014692)
-Implemented linked list for entity and sensors..(DCSG00219964)
-Enhance PLDM library for separation of APIs/LIB and source code.(DCSG00394996)
-Added Carriage Return (\r) in PLDM common library debug strings.(DCSG00069752)
-Added documentation for some scenarios.(DCSG00027067)
-Code cleanup activity.(DCSG00395207)
-PLDM Type 2 - Implement support for dynamic PDR repository change.(DCSG00165393)
-Address Coverity tool reported issues in PLDM Type 2 and Type 6 modules.(DCSG00352028)
-PLDM Type 6 - Add support for Redfish Message Event.(DCSG00255563)
-Add snapdump support for PLDM Type 2 and Type 6 modules.(DCSG00226303)
-PLDM: Implement PLDM Type-6 library API and commands.(DCSG00064565)
-PLDM Type 5 - Add changes for handling multipart transfers of QueryDownstreamIdentifiers and GetDownstreamFirmwareParameters.(DCSG01108737)
-PLDM: Implement generic string and linked list utility functions.(DCSG00056271)
-PLDM Type 2: Implement API changes and support for Redfish message event in PLDM Monitoring and Control module.(DCSG00253011)
-PLDM library support to report multiple PLDM App versions to BMC.(DCSG00026969)


Version 52.22.0-4774 - Moderate Impact/Low Probability of Occurrence
-------------------
    BIOS:7.22.00.0
UEFI Driver:0x07160300
HII: 07.22.03.00
MR FW:5.220.02-3784
    package 52.22.0-4774
MR 7.22 

Defects:
-Copyright year needs to be corrected in ROC firmware print.(DCSG01396947)
-Locate LED operation does not work for NVMe drive slot on UBM backplane.(DCSG01230479)
-Updated the forceUpdate format in PLDM header generation Tool.(DCSG00106563)
-Locate LED operation does not work for NVMe drive slot on UBM backplane.(DCSG01230479)
-WriteCache RDE alerts are logged irrespective of the volume cache policy(DCSG01088107
-RDE - REST client displays the controller cache state as 'Disabled' instead of 'UnavailableOffline' when a failed energy pack is connected(DCSG01093471
-Aligning RDE Port MaxSpeedGbps per the latest spec(DCSG01098703
-RDE Port Schema CurrentSpeedGbps property to be populated with aggregate of current speeds of connected devices(DCSG01098717
-RDE_VolumeSchema-Encryption and EncryptionType to be displayed conditionally(DCSG01098912
-RDE - Encryption Status drive resource property must be displayed if the drive is a Self Encrypting Drive(DCSG01098917
-RDE VolumeSchema - WriteHoleProtectionPolicy to be conditional for Raid types that use Write Journaling(DCSG01102935
-Fix sliced LD secure erase resume after power cycle or OCR(DCSG01107534
-RDE Port Schema: CurrentSpeedGbps and MaxSpeedGbps shown as a negative value(DCSG01108315
-Redfish NVMe DurableName to be displayed in IEEE-defined 64-bit Extended Unique Identifier (EUI) format(DCSG01111791
-make all is compiling now(DCSG01111915
-RDE : Volume schema WriteCacheState property changed to "Degraded" during volume Transformation(DCSG01113836
-RDE Volume Schema - State of Volume changed to 'Updating' while rebuilding(DCSG01120814
-RDE Read Compliance-Drive Schema Health changed to "Critical" and Status indicator to "Fail", when a Predictive Failure drive is made Offline(DCSG01120819
-LED updates and VSES commands from host are blocked during UBM BP FW update(DCSG01123121
-RDE : Volume schema InitializeMethod property should not show "Foreground" for Volume Erase Operation(DCSG01124997
-UBM Ctrl FW update - Block host request OCR(DCSG01132889
-Redundant Microcode update Complete event avoided - Restricting and Un-restricting PD during UBM Ctrl FW update is removed(DCSG01135144
-Corrected UBM Ctrl FW update Abort response to populate appropriate event(DCSG01143009
-UBM firmware update not happening on one out of two UBM controllers while rebuild operation was in progress(DCSG01148879
-ONLINE LED and Predictive Failure LED to be ON for specific OEM(DCSG01152693
-Updated EstimatedTimeBeforeSendingRequestFirmwareData(DCSG01155398
-Error values during PMSM preserved correctly(DCSG01155732
-Cancel update command response is set appropriately in the shim layer(DCSG01158535
-iMR 7.22 exceeds Max 8 SAS/SATA drives when more drives are inserted and they become Jbod.(DCSG01166723
-MR card failed to expose drives in Linux kdump(DCSG01170243
-PLDM Type 5 support for Downstream device enablement based on library support(DCSG01172419
-MR7.22PA1_Need to add bootKeyHalt to 0 for excessive drives(DCSG01173927
-Updated the common structure member values ,which are used during UBM BP update and MR controller FW update.(DCSG01175633
-Perc 11.4: During OCR, a snapdump was generated by FW due to "Assertion failure in fw\hw\pbam\serial.c at line 2413: IntNesting==0"(DCSG01175907
-MR7.22-Resetnow should be blocked for PSOC updates(DCSG01181534
-MR 7.22 PA2: 433T PSOC can't be flashed via storcli due to PN mismatch(DCSG01183086
-Configuration not exposed by MR on windows OS when device order is enabled(DCSG01184008
-MR FW not responsive to host interface after returning success to stop BGI / CC of an offline VD(DCSG01185811
-PEX88000 - Issue NF error to NIC card resulted in system crash(DCSG01186408
-fix sanitize block erase support on NVMe drive(DCSG01187755
-Firmware reports dirty cache lost in the UART log(DCSG01191291
-Assertion failure seen when expander resets and phy on & off executed in loop(DCSG01192071
-Assert Audit: fix printing when the analysis is restarted(DCSG01196023
-Code Coverage: fix SPDM path list in codeCoverageTool.py(DCSG01196255
-[VSes] Number of slots reported incorrectly in certain OEM backplane.(DCSG01200427
-Sanitize option seen in Apps when a drive is spundown by user(DCSG01201754
-While generating the snapdump, firmware hit the data abort exception(DCSG01216058
-Fix Kill Adapter when powering off one of the attached enclosures(DCSG01217941
-Firmware flash followed by expander reset hit the Exception(DCSG01234817
-PEX 89000: synthetic mode BST for B0 board(DCSG01236975
-Enclosure location is showing as "Internal" in LSA for Vses(DCSG01245355
-BST Failure: CFGI Fault with Latest 7.23 XSD(DCSG01246068
-PEX89000: Fix function parenthesis in packet generator functions(DCSG01247963
-Secured configured drives changing to unconfigured after reboot(DCSG01249672
-Controller hit Fatal error with exception when run PR and CC at same time(DCSG01267776
-Skip Enclosure Power Cycle test for OEM BST as it is not relevant and results in failure(DCSG01303587
-System restarts by itself and PL Fault 00005854 LinkRegister 01475093(DCSG01304319
-Enable the TTY Replace setting in NVDATA(DCSG01333745
-Fix wrong consistency state of Single drive R0 after setting physical drive offline then online(DCSG01141800
-MR7.21: Flash erase errors(DCSG01148422
-7.21 : Test bad flash in Megamon, found FW hit KA(DCSG01140493
-MR 7.21 Ventura FW Pk 4350 stops dumping data in FW log during OCR.(DCSG01156781
-Fatal firmware error detected after converted SATA SSD PD to JBOD(DCSG01112314
-CSCwb37148: SPDM programming got wiped out from Wlbur+Samishlake: Storage operations are failing.(DCSG01179653
-The Fault LED is on for the expander attached pre-failure EPD drive when rebooting the system(DCSG01172493
-FW logging CDB failure sense event twice for each failure(DCSG01149411
-[NVMe] Some NVMe drives do not link up on certain OEM backplanes.(DCSG01193134
-OOB SL\SLT NVMe Passthru : NVMe response buffer differs from host for get log information command for NVMe drives(DCSG01147859
-Unconfigured Bad SAS SSD drive is showing Media as HDD in LSA/Storcli(DCSG01196368
-Fix for the MPB test(DCSG01209348
-IO tool fails while running IO and Online Controller Reset in a loop(DCSG01206038
-[SATA] SATA Initialization fails on certain large capacity SATA drives(DCSG01194600
-Locate LED operation does not work for NVMe drive slot on UBM backplane(DCSG01230479
-Import certificate slot chain operation fails on SPDM enabled controllers(DCSG01200707
-Drive running sanitize overwrite becomes UBUnsp after a cold boot(DCSG01174553
-Fix to handle TTY Flash with write error(DCSG01077025
-Firmware crashes after reconstruction completes and IO running(DCSG01292231
-Foreign Config import Error message not proper in HII(DCSG01089538
-Assertion when playing copyback Write Journaling entries on warm reboot(DCSG01310309
-Flash / upgrade from Release Order Package 4567 to Release Order Package 4601 failed on JBOD mode Ctrl (profile = 20)(DCSG01312941
-Strocli show command displays incorrect number of physical drives count(DCSG01293599
-MegaRaid7.23: firmware hit assertion failure memory.h at line 447: isInAddressibleRange(physAddrLow)(DCSG01310030
-For un-configured bad foreign drive import and clear option buttons are visible in application(DCSG01315519
-Controller fault observed while running cache offload cycles with heavy IOs(DCSG01342893
-MR_7.24: firmware fault on 9560 megaraid card upon malformed sense command(DCSG01331157
-for JBODs, not setting physical drive state change committed bit in NVRAM.(DCSG01285247
-HW Workaround:HW_SETTINGS_CHANGE : PCIe PHY LF setting should be changed from 16 to 15(DCSG00013257
-SBR Build date and time corrected(DCSG00068041
-Clean up SBR Build Tools(DCSG00108561
-Update Source to Latest and Fix Uninitialized Variable(DCSG01335479
-Timer failing to expire(DCSG01286374
-Updated the forceUpdate format in PLDM header generation Tool(DCSG00106563

Enhancements:
-Single PLDM fw update file that covers all controllers from that series.(DCSG00019356)
-UBM Controller Firmware Update support(DCSG01016704
-Aero - Shim layer support for PLDM Type 5 UBM Backplane Firmware Update(DCSG01070579
-Aero 9540 iMR controllers - Support for multiple PSOC images(DCSG01076542
-Parses the UBM FW image file(DCSG01080232
-shim layer changes for prepare and download(DCSG01083777
-Aero - Block SES monitoring and locate LED functionalities when UBM backplane firmware update is in progress(DCSG01088688
-Make branding compliance changes for new features including Sanitize support(DCSG01090347
-Allow FW downgrade for shenandoah(DCSG01093455
-New PNP ID addition(DCSG01101846
-RDE Read Compliance - Align to the latest Spec(DCSG01107680
-Calculate downstream devices length of QueryDownstreamIdentifiers command(DCSG01108419
-PLDM Type 5 - Set Downstream Device Component Update Failure Recovery Capability parameter of GetDownstreamFirmwareParameters command to 0(DCSG01123160
-Shim layer changes to add Vendor Defined descriptor support for PLDM FW update UBM Ctrl Downstream Device(DCSG01128935
-Reduce eTTY and Binary Trace Logic Stack Usage(DCSG01139030
-Add Additional PSoC 4 FWs to Catalog File(DCSG01157615
-Remove custom library prefix from builds(DCSG01170510
-97xx: SCONS changes are required for loading 97xx SBR(DCSG01171935
-Remove PSoC 5 OCP PSoC FW from Catalog Releases(DCSG01175916
-Check-in Cypress License Agreement into MR Cypress Code Tree(DCSG01177646
-Add Firmware Version 13 for PartNumber 29810 to PSoC Catalog Image(DCSG01179045
-Code Coverage Improvement: better handling of long strings in ETTY(DCSG01179424
-Reduce _vnprintf stack usage(DCSG01186456
-Code Coverage Improvement: Adjust Preprocessing in Snapdump(DCSG01194315
-Code Coverage: Add MPB test status(DCSG01195938
-Code Coverage Improvement: exclude development only functions(DCSG01196166
-Code Coverage: allow tools to be in other directories(DCSG01196286
-Add message when invalid phy is passed to get connector index(DCSG01197627
-Code Coverage: support all build target(DCSG01197780
-Code Coverage: support all build target -- fw_bld_tools(DCSG01199258
-Update OEM specific BST scripts to include mainline changes.(DCSG01200062
-Add New PSoC 5 OCP Channel and Megacell and PSoC 6 BGA Megacell Releases to PSoC Catalog Image(DCSG01203313
-Add Firmware Version 15 for PartNumbers 29211 and 29651 to PSoC Catalog Image(DCSG01208354
-Add Firmware Version 16 for PartNumbers 29211 and 29651 to PSoC Catalog Image(DCSG01209445
-Code Coverage Improvement: remove some constants from the Snapdump symbol file(DCSG01209495
-Updated OEM auto bst scripts(DCSG01212778
-Add API changes to support option to filter spin up sense events through NVDATA field filterDSSpinUpEvents(DCSG01218513
-Add New field in NVDATA to enable or disable spin up sense events(DCSG01218525
-Add NVDATA bit for allow Enterprise Key Management enable/disable support(DCSG01218843
-PEX89000: Add PEX89000 packet generator support to DevBst(DCSG01223198
-Add a new bit to parameter page 0(DCSG01224690
-SCONS: Update the back trace symbol generator so that it supports unlimited symbols(DCSG01230985
-Add a TtyReplace switch to NVDATA(DCSG01232885
-Add a TtyReplace switch to NVDATA(DCSG01232969
-Update config file for PEX89000 A0 devBST(DCSG01235384
-Run PEX89000 devBST on B0 board(DCSG01247942
-Revert NVDATA change for allow external key management feature enable/disable support(DCSG01248896
-Reverting XSD change for external key management support feature(DCSG01248908
-PLDM single image support(DCSG01249347
-PEX89000: Add configuration for the PEX89000 B0 BST setup(DCSG01256006
-Firmware: Prevent installation of inappropriate FW image on Intel branded MR/iMR adapters(DCSG01272302
-Add API changes to support slow array logic override through NVDATA field overrideSlowArrayThresholds(DCSG01289475
-Add new field overrideSlowArrayThresholds in XSD to enable or disable slow array logic(DCSG01289615
-Add Firmware Version 3 for PartNumbers 25731 and 25931 to PSoC Catalog Image(DCSG01291552
-Add Firmware Version 10 for PartNumbers 6021, 14790, and 14798 to PSoC Catalog Image(DCSG01296892
-Add Missing PSoC Firmware Files for DCSG01291552(DCSG01301007
-Optimize the default Consistency check and patrol read settings for decreasing the workload on drives(DCSG01339902
-Add Firmware Version 19 and 18 for New OEM PartNumbers 29652 and 32052 to PSoC Catalog Image (Part 1)(DCSG01350783
-API changes to set the default execution interval for Consistency check and patrol read through NVDATA(DCSG01358207
-Add new field consCheckAndPatrolReadExecFreq in XSD file to set the default execution interval for Consistency check and patrol read through NVDATA(DCSG01360727
-Spin up recovery. changes for supporting OEM drive issue(DCSG01168828
-PLDM library support on Aero iMR controllers(DCSG01176360
-Firmware: Add a SAS/SATA only profile(DCSG01311360
-Single PLDM fw update file that covers all controllers from that series(DCSG00019356


Version 52.22.0-4563 - Moderate Impact/Low Probability of Occurrence
-------------------
    BIOS:7.22.00.0
UEFI Driver:0x07160300
HII: 07.22.03.00
MR FW:5.220.02-3694
    package 52.22.0-4563

Defects:
-Unconfigured Bad SAS SSD drive is showing Media as HDD in LSA/Storcli.(DCSG01196368)
-Fix Kill Adapter when powering off one of the attached enclosures.(DCSG01217941)
-Firmware flash followed by expander reset hit the Exception.(DCSG01234817)
-Enclosure location is showing as "Internal" in LSA for Vses.(DCSG01245355)
-PEX89000: Fix function parenthesis in packet generator functions.(DCSG01247963)
-Release Note update for Downgrade firmware from 7.22 to & 7.2x.(DCSG01270046)
-IO tool fails while running IO and Online Controller Reset in a loop.(DCSG01206038)
-Import certificate slot chain operation fails on SPDM enabled controllers.(DCSG01200707)
-[VSes] Number of slots reported incorrectly in certain OEM backplane..(DCSG01200427)
-Updated the forceUpdate format in PLDM header generation Tool.(DCSG00106563)
-Controller Missing on some Power Cycle iterations.(DCSG01233716)
-VSes] Number of slots reported incorrectly in certain OEM backplane.(DCSG01200427)
-Fix return status when there is no more target ID available at auto config.(DCSG01140002)
-Controller marks a drive UBUnsp if the server is rebooted while running Sanitize Overwrite.(DCSG01141274)
-Firmware hang observed during controller boot..(DCSG01142137)
-[Aero][SNTL] SNTL Generic command Status successful completion with no SenseKey is sending wrong SCSI status to application.(DCSG01146888)
-MR7.21: Flash erase errors.(DCSG01148422)
-Fix the check blocking FDE drive on Sanitize.(DCSG01156368)
-MR 7.21 Ventura FW Pk 4350 stops dumping data in FW log during OCR..(DCSG01156781)
-Fail the UBM firmware update request gracefully if Programming Update is not supported by the UBM Backplane..(DCSG01159186)
-[Aero] "Couldn't init SBLI" error print seen in firmware uart during controller boot up.(DCSG01161361)
-Data Miscompare observed with sliced R5 Logical Drives during write(cache) policy change.(DCSG01161554)
-Update the error code when there is no target ID available for auto config EPD.(DCSG01163316)
-Generate BootMsg when more than 4 NVMe drives is inserted in the boot cycle at profile 41 for iMR.(DCSG01165091)
-Fix wrong persistent dev id due to profile change.(DCSG01166149)
-Aero iMR: FW did not block downgrade from MR7.22 (profile 41) to MR7.21 causing CTRL into safe mode.(DCSG01169605)
-NVMe drives behind 9460-16i controller doesnt discover on SOD.(DCSG01172751)
-Fix persistent Id clearing when profile is not changing.(DCSG01175414)
-Firmware asserts when reading the UBM backplane information and UBM controller firmware update in progress.(DCSG01132100)
-PL is not returning proper sense information as part of UBM controller firmware update failure reply..(DCSG01145707)
-PL fails to report the UBM controller firmware update failure after receiving the bad checksum.(DCSG01148192)
-Controller cache has been lost seen during Cache Offload Loop test.(DCSG01108247)
-Discovery times out when connected to UBM backplane with x4 link width..(DCSG01165227)
-Secure erase is not working properly for UG Bad drive.(DCSG01106797)
-Diff drives shows as UG and sector size 0/blank in BRCM applications.(DCSG01145221)
-FW asserts on executing scrutiny phy -speed command.(DCSG01089818)
-Support NVMe Width is displayed as "Yes" for RAID 940-8e controller.(DCSG01119307)
-Phy bad events seen for one of the Enclosure Valid Slot.(DCSG01088807)
-Updated the forceUpdate format in PLDM header generation Tool.(DCSG00106563)

Enhancements:
-Remove custom library prefix from builds.(DCSG01170510)
-SCONS: Update the back trace symbol generator so that it supports unlimited symbols.(DCSG01230985)
-Update config file for PEX89000 A0 devBST.(DCSG01235384)
-Single PLDM fw update file that covers all controllers from that series.(DCSG00019356)
-Blocking at MR FW and graying out at applications for changing the link speed for any UBM behind drives.(DCSG00950267)
-Add multiple SPI device access devBST tests on SPI0.(DCSG01003421)
-Partial configuration import events and messages in the utilities..(DCSG01070721)
-Cosim BST: Update the FW package content for file name changes (pci4armfw => pcifw).(DCSG01132044)
-Code Coverage: build improvements.(DCSG01135245)
-Create OEM PSoC FW Based Catalog File.(DCSG01136930)
-Update Atlas2 devBST script with filename changes.(DCSG01137350)
-PEX89000 BST ER: Two host flash boot feature BST Evaluation for COSIM.(DCSG01138480)
-PEX89000 BST ER: Eight host flash boot feature BST Evaluation for COSIM.(DCSG01143184)
-Add PSoC Image Checking and FW Blocking for Aero iMR.(DCSG01153976)
-Update PSoC MR FW Downgrade Block MFI_STAT to be More Clear.(DCSG01155856)
-Add Firmware Version 12 for PartNumbers 29211 and 29651 to PSoC Catalog Image.(DCSG01159010)
-Update link speed control bit in SAS PHY connection structure..(DCSG01164061)
-97xx: SCONS changes are required for loading 97xx SBR.(DCSG01164951)
-Add Firmware Versions 27 and 1 for PartNumbers 15987 and 25731 to PSoC Catalog Image.(DCSG01166118)
-Make API changes for new event FOREIGN_CFG_NON_IMPORTABLE_FOUND.(DCSG01168924)
-Code Coverage Improvement: update command line parsing in cfgi.(DCSG01169587)
-Code Coverage: add an identifier when dumping coverage data.(DCSG01170508)
-SPILIB2: 9700 Series core needs maximum continuous count initialized earlier.(DCSG01170965)
-SPDM 1.1 - Validate Certificate Chain during import operation.(DCSG01096875)
-Single PLDM fw update file that covers all controllers from that series.(DCSG00019356)


Version 52.20.0-4414 - Moderate Impact/Low Probability of Occurrence
-------------------
    BIOS:7.20.01.0
UEFI Driver:0x07140000
HII: 07.20.07.00
MR FW:5.200.02-3637
    package 52.20.0-4414
MR 7.20

Defects:
 SPILIB2: Fix offsets in SPI2_LIB_DEVICE_PARAMS(DCSG00428841
 Etty Compression fix(DCSG00735202
 MR_7.20 missing VD's after OCR and enclosure Pull/Push(DCSG01061674
 MR_7.19_DBU: OS Assert at ioCom_wld @lsi_mr3 - While removing Aero IMR PCI devices from pass-through.(DCSG01005149
 FW hits KA when OCR Ctrl has pinned cache, while controller in Safe Mode(DCSG01061904
 Fault 0x7600 observed when 1 phy is disabled in SAS IO Unit page 1(DCSG00788430
 CC pause and resume with OCR restarts the CC on VDs that have already completed CC(DCSG01047837
 MR7.19: Aero Ctrl global fault LED is not ON when there is unconfig_bad drive on the Ctrl(DCSG01027566
 VSES : Multiple elements of SES page 0xA are assigned the same slot number(DCSG00973316
 Fix build errors related to ~\.buildver(DCSG01004381
 Fix a math error in the Memory Pool creation firmware(DCSG01024464
 PL NVMe : IOs fail with SGL length shorter than the transfer legth(DCSG00501518
 Found a lot of prints " C0:setupLd: Debug allSsdLd=1" while configure Lds using SSD drives(DCSG00931199
 PD Power State Set DCMD interface does not spin up Hot spare drives(DCSG01091672
 21B Alpha LSA: Foreign VD's, VD1 and VD2 names are not displayed in foreign config preview page.(DCSG00927138
 SCSI Compliance 2.0 Failure ASSERTION: VERIFY (16) Exceed Capacity Test(DCSG00957057
 MR 7.18 Alpha: Aero/Ventura MR: Performance: Observing 5-7% drops in SR/SW on HDD's for small IO's(DCSG00947708
 Enclosure handle for some direct attached device might be wrong during Event replay for direct attached slot order case.(DCSG00381441
 Fix static analysis issue 189500(DCSG00396542
 FW hits an exception and controller is not detected when FW upgrade from MR7.9 to MR7.16 (37 drives connected)(DCSG00984380
 AV1 SCONS: improve symbol sorting speed(DCSG00758775
 BST Failure: Memory Pool While Integrating PL 18.250.2.0 and MPI 2.6.11 Headers(DCSG00837036
 FW Logs/termlogs should change the Copyright 2017-2022(DCSG01116760
 Rebuild did not start after replace a new drive from shutdown(DCSG01030129
 Unable to change current behavior mode to NONE from RAID-0 in JBOD personality(DCSG00970577
 Assert Audit: remove 1 in SPDM client(DCSG00708196
 Update SSUTimeout Fields Value in BIOS Page 1 to 0xF0(DCSG00982364
 Unable to simulate VD policy change with different status register values on PB via megamon(DCSG01004220
 540-16i -Assertion failure @ fw\dm\pl3.5\plDmI2c.c(DCSG01013987
 Fix wrong return status on setting controller time(DCSG00905426
 Clearing the tty history with cli delete termlog command causes firmware to hang(DCSG01098208
 Fix incomplete event description during firmware flash with secured config(DCSG01028777
 Support NVMe Width is displayed as "Yes" for RAID 940-8e controller(DCSG01119307
 Fix MCTP flash firmware issue(DCSG01098220
 MR 7.19 prep for Alpha: Ventura iMR hits multiple data aborts when loading 4096 ROP(DCSG01002615
 MR 7.19 PA1:Properties are showing for unsupported drive which should be hidden(DCSG00943721
 Missing spans from R10 Virtual Drives makes system hangs at init boot screen(DCSG01031004
 MR7.20: Found a lot prints "C0:MfgMsg: Error reading device chemistry. I2C Error = 0x2" while PR(DCSG01044765
 Fix some enclosure prints(DCSG00945350
 Imbalanced bandwidth performance with 2 x4 expanders connect to Aero IT controller(DCSG00950631
 Copyback status is displayed post clearing configuration(DCSG01039193
 FW asserts on executing scrutiny phy -speed command(DCSG01089818
 4K Rand write test got poor performance from 4 drives RAID5 unexpectedly(DCSG00951753
 During Single Dip COL testing, unsuccessful restore reported(DCSG00916437
 Drive secured by non-MR FW owner does not show as "locked" when place behind Mercury OEM controller(DCSG01058849
 7.21: A hang is seen when attempting to update the the psoc using a catalog file when storcli does not support, but FW does.(DCSG01093791
 PD state change reported only once when copyback is suspended and resumed(DCSG01081139
 Aero iMR: All configs lost after system reboot/ocr(DCSG00987846
 Hot add drive on UBM backplane with x2 or X4 DFC reports incorrect element status in SES Page 02h(DCSG00967012
 Fix response to setting JBOD for unsupported drive(DCSG01041383
 [Aero] PCIe Compliance Configuration Failure - 1_44 DPA Ext Cap Struct(DCSG00972342
 ScrutinyCLI in UEFI mode failed to download Aero MR NOPAD images using hostboot (hb) command(DCSG00984134
 Update BinToRom.exe to match updated BinToRom.c(DCSG01082490
 Added "TimeSyncInterval" to the FW ManPage11 data-struct to match the XSD definition(DCSG01041327
 MR_7.20:VD target IDs changing during foreign config import - DC observed on running IOs post VD import(DCSG01045309
 Remove deprecated Vision builder(DCSG01078124
 FW not setting Opal MSID password length properly when resetting password to MSID(DCSG01042567
 Remove stray debug prints from the build(DCSG00923050
 MR7.20-Discrete part iMR controller allows PSOC flashing(DCSG01066232
 NVMe response buffer differs from host for get smart health information(DCSG01118222
 Firmware asserts during OCR with JBOD auto creation(DCSG01074021
 Fix Missing OCP ROMs Copy Back(DCSG01093193
 Code review defects(DCSG00852833
 Fix Static code analysis issue 227160(DCSG01002742
 SPILIB2 : Watchdog reset due to ARM Exception while flash under stress(DCSG00814654
 VD Failure while updating Drives(DCSG01116221
 MR 7.18: Secure drives creation using multiple secure key unable view and import the first removed encrypted VD until the second VD has been imported.(DCSG00924602
 Integrate IT Security Page Fixes into MR(DCSG01030957
 Able to set phy link speed 1.5 GBp/s from Storcli(DCSG01030969
 Update Version Field value in Std Inquiry Data of vSES Device(DCSG00966397
 Fix mfg message error(DCSG00944355
 MR 7.18 PA2: Elrond U.3x4 is showing incorrect drive count(DCSG00923028
 Aero iMR: FW crashed with DMA Config Registers task when create all disks R0(DCSG00985641
 MR 7.20: Json Event long message for missing PD needs to be updated(DCSG01040031
 Phy bad events seen for one of the Enclosure Valid Slot(DCSG01088807
 Data Abort exception happened during journaled writes(DCSG01113159
 Ventura/Mercator: pl: 4311 fault(DCSG00918020
 7.19 Aero iMR: Can't OFU with initial package, or mfc editable FWdrop(DCSG00987720
 Fix the incorrect configurablePD Count(DCSG01010108
 iMR-7.19_Firmware exception when loading LSA(DCSG00983722
 Critical Error Log created if the Firmware Download of BIOS using BIOS image from different package than Firmware.(DCSG00951807
 Fix Delayed Expansion Issue in add_catalog_rom.bat(DCSG01092304
 Update the Default Vendor ID of Virtual SES Device(DCSG01012204
 Drives not discovered when an enclosure is hot plugged after removing a PCIe switch based JBOF(DCSG00957168
 Unsupported MPI Config page read from OOB provides data in response(DCSG00937617
 Fix Static Code analysis Issues 207355, 207335, 207295(DCSG00838353
 EPD is not created after import with escrow if escrow key matches controller key(DCSG00968394
 Fix unmap writesame for a NVMe drive with small max data buffer length(DCSG00972351
 Fix Static code analysis issue 227358(DCSG01002732
 SATA only : ATA PT command for SMART READ ATTRIBUTE THRESHOLDS(B0h/D1h) fail when COUNT field is set to 0(DCSG01030777
 After Rebuild to Hot Spare, Copyback to Replacement Drive does not Start Automatically(DCSG01015011
 Data length from host to DA-SEP device not checked if it is more than buffer length in firmware(DCSG00915992
 SL OOB: NVME response buffer is not displaying user requested size of response buffer.(DCSG01151757
 Fix read wrong config page for NVMe drive behind Atlas(DCSG00954454
 Spell Checking: fix false positive handling(DCSG00916545
 Response to OOB command is not sent on Internal Dynamic Memory Allocation failure(DCSG00906577
 MR7.20_Ventura+Windbond_CV learn fails(DCSG01127762
 Remove SPDM debug logs from UART print(DCSG01022803
 [3408+ MR7.16] configurablePDCount would exceeded if set jbod on while UG drives are in spundown.(DCSG01032834
 Verify show all settings for Aero iMR show incorrect values for PSOC support and Discard Cache on LD Delete(DCSG00982497
 iMR 7.20 FW keeps dumping a message to FW log for Encs "Analyzing Status Page"(DCSG01025079
 iMR-719-EFI driver fails to load(DCSG00988360
 PERC 11 iMR : H355 Front FW hits data abort exception handler during FLR when configured as a PCIe passthru device to a VM(DCSG00996417
 Performance drop seen with direct attached SAS/SATA drives(DCSG00980873
 Foreign drive import command was successfully executed, but the drive is still marked as a foreign drive(DCSG01039809
 Remove tabs in fwSConstruct(DCSG01000963
 pl: backend PCIe: PCIe error handler fails to issue task management with cascading errors(DCSG00839445
 Fix Static code analysis issue 227329,227318(DCSG01002734
 Firmware hits assertion failure on starting Recon following a VD delete operation(DCSG01004383
 Performance drop seen with SAS/SATA drives in Windows using latest driver(DCSG00981706
 MR 7.20 PA2: truncated coverage data(DCSG01040242
 Reinstate ER 1010648(DCSG01025061
 Blue Screens while collecting "pl dbg" logs(DCSG00984451
 Storage controller goes through repeated resets and is not discovered by host(DCSG00943829
 UBM statistics data collection and UBM error handling fixes(DCSG00975065
 22B:PSOC6 -PSOC download/flash fails having Cv/BBU in failed (bad) state(DCSG01140342
 Atlas2 Veloce BST: Wait till MPT driver load complete in single host MPT testcase(DCSG01087297
 SPILIB2: (Margay Only) ARM Exception while flash under stress upon closing telnet(DCSG00914933
 MR 7.18PA2: DC seen after pinning WJ on a R50 using an enclosure(DCSG00917387
 FW returns duplicate target ID for Foreign import preview commands(DCSG00982854
 SPDM lib compile error for Ventura build(DCSG00810786
 Data Abort_Exception Core 0 when FW Device order is enabled from host(DCSG01018512
 Coverity : Remove dead code(DCSG00982343
 MR 7.18 PA1: fall import on encrypted VD results in storcli pop up message Incomplete foreign configuration(DCSG00915794
 MR7.18_Alpha:Foreign import from Mutli Span/LD drive with other drives cause, FW crash and import failure(DCSG00949516
 iMR: Legacy Mode: System reboot and PL fault detected during boot after R0,R1,JBOD creation and reboot.(DCSG01010774
 No Default value of DMA FIS Timeout(DCSG01028477
 Aero iMR: While PDs are rebuilding with IOs using all SATA drives, fw prints a lot of "PdSyncCacheTimer###..."(DCSG01020734
 Secure erase is not working properly for UG Bad drive(DCSG01106797
 Assert Audit: remove 2 related to toolbox commands(DCSG00431548
 Rebuild did not start after pull out a PD and insert a new PD iMR Aero(DCSG01012142
 Performing RLM by removing offline PDs from R1 VD to R0 VD results in reconstruction completion due to unrecoverable errors(DCSG00922691
 Assert Audit: remove 2 related to NVMe(DCSG00431546
 MR7.19PA1_After COL locked VD fails to import after becoming unlocked(DCSG00962887
 Diff drives shows as UG and sector size 0/blank in BRCM applications(DCSG01145221
 Fix controller does not show foreign config and pinned cache correctly(DCSG01050353
 Expander show status is being marked unsupported in megaraid and switch configurations(DCSG00958041
 Fix LSA time sync problem(DCSG01029543
 iMR: H350A Data Abort exception handler was called during boot with 32xR0 vds.(DCSG01007908
 Fault 0x070A observed while performing firmware downgrade.(DCSG00758163
 Foreign configuration import of sliced logical drive causing memory allocation failure(DCSG00989355
 Firmware assertion while performing firmware download using offline method on PCIe switch configuration(DCSG00956089
 MR 7.20 PA2: Code coverage code stuck printing forever(DCSG01031802
 AeroMR_7.20PA:Storcli Hangs on triggering controller restart and fails to exit command prompt(DCSG01040153
 MR719_PA1_MA drive become jbod(Unsupported) and IO will run on them(DCSG00957470
 MR 7.18PA2: Not all spans are rebuilding after pinned wj(DCSG00923279
 MR7.20-iMR-Multi-LUN / Multi-Actuator drives show up as good(DCSG01024028
 BST Failure: Revert defect 1010648(DCSG01021874
 [Aero][UBM] Enhance the link configuration to handle the link speeds for SAS/SATA drives behind UBM.(DCSG00552897
 Firmware not returning proper MFI status after CPLD update(DCSG01034288
 FW Fault 2622 observed during system boot up in some new Gen4/Gen5 servers(DCSG00947451
 FW assert is observed while performing JBOD to GOOD and vice-versa on 8 NVMe drives connected behind Atlas and drive push pull is run in parallel.(DCSG00936303
 MR 7.18: In the presence of any one of the PD in prepare for removal state,Changing the behavior mode to JBOD from None, is not making the remaining UGOOD PDs to JBOD.(DCSG00941787
 MR 7.18: Changing the behavior mode to RO from None, is not making the UGOOD PDs as RO VDs in the presence of the PD with Clear Drive or Drive Erase Process.(DCSG00908662
 RefClk enabled for sgpio backplane type(DCSG00995519
 pl: NVMe: Format Unit FMTDATA bit should be ignored(DCSG00063448
 VPD data printed on every reboot(DCSG01035788
 iMR_719_33 Drives show up after clearing foreign config(DCSG00992356
 fix Static code analysis issue(DCSG01002737
 BST Failure: Update ManPage11 for Phase 21 PL(DCSG01027882
 Fix to handle TTY Flash with write error(DCSG01077025
 Atlas-1 VSFW BST SBR test fails(DCSG01014577
 Fix Static code analysis issue 227198(DCSG01002739
 On OEM server: HII displays battery/supercap moduleVersion as "-231-4GB"(DCSG00920768
 Fix too many debug messages(DCSG01032533
 Typo and style fixes in traceTool.py(DCSG00926022
 Fix EPD boot disk not available at legacy BIOS(DCSG01111179
 (SATA Only) Inquiry command to read Block device Characteristics VPD Page fails on some SATA drives(DCSG01025293
 Two elements of SES Page A are assigned same slot number for UBM backplanes with x2 DFC(DCSG00966202
 Fatal firmware error detected after converted SATA SSD PD to JBOD(DCSG01112314
 Fix Static code analysis issue 227397(DCSG01002729
 Some of the EPDs getting listed wrongly as single drive RAID 0(DCSG01009103
 Online CPLD Update is Failing on Aero OEM IMR Controller(DCSG01008490
 FW asserts when try to create secured VDs using a FDE drive(DCSG01138487
 MR7.19:Incorrect Date and Time displayed and not in sync with OS(DCSG00967609
 Patrol read fails to correct medium error on verify capable NVME drives(DCSG01055287
 Use snprintf in some print code(DCSG00840191
 MR 7.18 PA1: Inconsistent StorCLI error message during import of VD+EPD+Foreign VD exceeding max supported configuration(DCSG00832259
 Autoconfig fails to create R0 or EPD on eligible drives in presence of Multi-Lun drives.(DCSG01030203
 When read termlogs observing Copyright as 2017-2018 which needs to be changed to 2017-2021(DCSG00960207
 Data Miscompare observed with sliced R5 Logical Drives during write(cache) policy change(DCSG01161554
 Drive changes from UG to UB, when user start the initialization followed by secure erase on same drive(DCSG00837473(Port Of Defect(DCSG00946483)
 [Aero][PLDM] PLDM Timer restart failing(DCSG00430198(Port Of Defect(DCSG00830822)
 SES Management is switching to ON after set autoconfig=NONE via CLI(DCSG00415487(Port Of Defect(DCSG00995287)
 [Aero] Phase 18 build error fix(DCSG00708175(Port Of Defect(DCSG00708188)
 "Spurious interrupt" messages seen in ttylog(DCSG00816167(Port Of Defect(DCSG01004654)
 STP pass-thru cmd timed out(DCSG00986496(Port Of Defect(DCSG01023742)
 R0 VD id change from 239 to VD 0 after multiple PD remove and reimport.(DCSG00424057(Port Of Defect(DCSG00995285)
 Integrate IT Security Page Fixes into MR(DCSG01030957(Port Of Defect(DCSG01034017)
 Boot message "Error restoring offloaded cache" popup for 940 card w/o SuperCap during AC power cycles(DCSG01087695(Port Of Defect(DCSG01116312)
 SPDM key reading failed when complete flash Erase case(DCSG01032600(Port Of Defect(DCSG01032601)
 FW hits an exception and controller is not detected when FW upgrade from MR7.9 to MR7.16 (37 drives connected)(DCSG00984380(Port Of Defect(DCSG00988902)
 Incorrect PLDM firmware release date is displayed in BMC applications(DCSG00926179(Port Of Defect(DCSG00966522)
 FW hits an ERROR: Exception Handler EXCEPTION during reboot of a server with PCIe gen5(DCSG01097640(Port Of Defect(DCSG01107907)
 BMU set startlearntime does not set properly(DCSG00917983(Port Of Defect(DCSG00991775)
 Fault 0xEE19 observed while running lane break test with managed switch attached to controller.(DCSG00939163(Port Of Defect(DCSG00947866)
 [Aero][OOB] Firmware download in loop from OOB in PCIe mode fails(DCSG00555977(Port Of Defect(DCSG00831123)
 7.21: A hang is seen when attempting to update the the psoc using a catalog file when storcli does not support, but FW does.(DCSG01093791(Port Of Defect(DCSG01099363)
 pl: SAS IO Unit Page 1 Write Current may not cause phy to be enabled(DCSG00654031(Port Of Defect(DCSG00734511)
 Incorrect slot number reported for drive with bad Phy(DCSG00986779(Port Of Defect(DCSG00989522)
 Drive(s) not shown to Host after push/pull operation behind expander(DCSG00758691(Port Of Defect(DCSG01015942)
 SATA drive is not detected during hot plug test(DCSG00975159(Port Of Defect(DCSG01062363)
 NOTIFY(ENABLE SPINUP) is not sent to spin up legacy SAS drives when partial/slumber mode is enabled.(DCSG01044213(Port Of Defect(DCSG01137571)
 NVME EPDs, with heavy IOs and TM from host side and NVMe passthru commands in loop from OOB. After 5-8 hrs hit KA(DCSG00939439(Port Of Defect(DCSG00970531)
 Bad PHY events generated by RAID stack for invalid VSES elements slot with Critical status(DCSG00925970(Port Of Defect(DCSG00927932)
 Some drives missing in OS when Direct attached slot order event replay flag is set in NVDATA(DCSG00991409(Port Of Defect(DCSG00996085)
 Fix for allowing offline VD to be set as bootdrive(DCSG00925005(Port Of Defect(DCSG00926405)
 Log Power State Change event for Hot spare drives spun up using MR_DCMD_PD_POWER_STATE_SET DCMD(DCSG01137533(Port Of Defect(DCSG01138265)
 Firmware asserts during OCR with JBOD auto creation(DCSG01074021(Port Of Defect(DCSG01091678)
 HBA hangs on boot with failed UBM backplane in a multi-UBM backplane topology(DCSG00653774(Port Of Defect(DCSG00707457)
 FW Logs/termlogs should change the Copyright 2017-2022(DCSG01116760(Port Of Defect(DCSG01119586)
 MR_7.20 missing VD's after OCR and enclosure Pull/Push(DCSG01061674(Port Of Defect(DCSG01074900)
 Fix unmap writesame for a NVMe drive with small max data buffer length(DCSG00972351(Port Of Defect(DCSG01005797)
 Secure erase is allowed on JBOD/EPD(DCSG00840773(Port Of Defect(DCSG01015944)
 Fix LSA time sync problem(DCSG01029543(Port Of Defect(DCSG01034066)
 Incorrect usage of Block Limits Virtual physical disk npwg field resulting in 0x7 being treated as 7 512B sector length IOs with NVMe drives(DCSG01026871(Port Of Defect(DCSG01032306)
 Fix MR recovery retry timer.(DCSG00926330(Port Of Defect(DCSG00992338)
 Fault 0xEC0F seen while aborting an active recovery on a NVMe drive(DCSG01021656(Port Of Defect(DCSG01023749)
 FW stuck in COL-BIOS Reset loop when COL times out(DCSG00907382(Port Of Defect(DCSG00932410)
 MR7.20-Discrete part iMR controller allows PSOC flashing(DCSG01066232(Port Of Defect(DCSG01070280)
 MR7.20-Drive pull during recon-Assertion failure in fw\raid\pd.c at line 8254 AR Invalid(DCSG01054517(Port Of Defect(DCSG01066945)
 Kill adapter seen on multiple EPDs with IOs with TMs(DCSG00923995(Port Of Defect(DCSG00970534)
 Clearing the tty history with cli delete termlog command causes firmware to hang(DCSG01098208(Port Of Defect(DCSG01108301)
 MR7.20: Found a lot prints "C0:MfgMsg: Error reading device chemistry. I2C Error = 0x2" while PR(DCSG01044765(Port Of Defect(DCSG01077927)
 Unable to simulate VD policy change with different status register values on PB via megamon(DCSG01004220(Port Of Defect(DCSG01008661)
 Patrol read fails to correct medium error on verify capable NVME drives(DCSG01055287(Port Of Defect(DCSG01078110)
 Fixed fault 0xF000 when doing VSES task management(DCSG00927996(Port Of Defect(DCSG00934187)
 Connector name in SAS Device Page 0 of the VSes/DA-SEP is not set correctly(DCSG00995575(Port Of Defect(DCSG01003869)
 Kill adapter seen on multiple EPDs with IOs with TMs(DCSG00923995(Port Of Defect(DCSG01015951)
 Memory Scrub DDR Pattern Operation crashes the controller(DCSG00908167(Port Of Defect(DCSG00920939)
 Aero 7.19 iMR: CBB unable to find secondary image(DCSG00987835(Port Of Defect(DCSG01038387)
 KeyID is cleared before the transition is finished(DCSG00936150(Port Of Defect(DCSG00977211)
 NVRAM signature invalid. Aborting DDR scrub & ECC check!!!(DCSG01111513(Port Of Defect(DCSG01126920)
 (SATA Only) IO Timeouts seen while running Unmap, SATA Passthrough and Read/Write IOs to a SATA drive(DCSG00654439(Port Of Defect(DCSG00831920)
 FW asserts when try to create secured VDs using a FDE drive(DCSG01138487(Port Of Defect(DCSG01148515)
 MCTP : MCTP MPI requests are failed with drive missing status even when drive is present(DCSG00952803(Port Of Defect(DCSG00956655)
 SATA : one or more HDD are not discovered by OS when drives behind expander are powered ON(DCSG00947126(Port Of Defect(DCSG00964427)
 Drive changes from UG to UB, when user start the initialization followed by secure erase on same drive(DCSG00837473(Port Of Defect(DCSG01015953)
 [3408+ MR7.16] configurablePDCount would exceeded if set jbod on while UG drives are in spundown.(DCSG01032834(Port Of Defect(DCSG01044605)
 Bad sensor slot case should not counted again when marking slot bad.(DCSG00961696(Port Of Defect(DCSG00977229)
 VD Failure while updating Drives(DCSG01116221(Port Of Defect(DCSG01124651)
 DMA error observed during xtools 'show' command in Atlas behind Aero config(DCSG01051896(Port Of Defect(DCSG01079552)
 Controller Faults when connected to DA SEP Backplane(DCSG00916381(Port Of Defect(DCSG00918045)
 Incorrect message while importing only the locked foreign config(DCSG00963973(Port Of Defect(DCSG01023874)
 Secure erase is allowed on JBOD/EPD(DCSG00840773(Port Of Defect(DCSG00970537)
 Assertion failure in FW when user initiate rebuild on partial degraded R6 VD(DCSG00921397(Port Of Defect(DCSG01015950)
 FW hits an ERROR: Exception Handler EXCEPTION during reboot of a server with PCIe gen5(DCSG01097640(Port Of Defect(DCSG01107908)
 FW hits an exception and controller is not detected when FW upgrade from MR7.9 to MR7.16 (37 drives connected)(DCSG00984380(Port Of Defect(DCSG00988901)
 CLI application shows improper error import message after successful Foreign import(DCSG00915940(Port Of Defect(DCSG01015959)
 PCIE failure causes TBM failure which leads to control plane hang(DCSG00969750(Port Of Defect(DCSG00990809)
 Dev-defect: WRITE with a transfer-size of 0 results in a hang.(DCSG00380906(Port Of Defect(DCSG00904252)
 If personality mode is "undefined", FW set to RAID mode but still set new hotplug drive to JBOD state and auto rebuild does not start(DCSG00928865(Port Of Defect(DCSG01015962)
 Firmware assertion while performing firmware download using offline method on PCIe switch configuration(DCSG00956089(Port Of Defect(DCSG01034998)
 Some drives and enclosures not added to Windows OS when SAS/SATA devices are reduced in NVDATA.(DCSG00654062(Port Of Defect(DCSG00757561)
 Assertion failure in FW when user initiate rebuild on partial degraded R6 VD(DCSG00921397(Port Of Defect(DCSG00970530)
 Incorrect PLDM firmware release date is displayed in BMC applications(DCSG00926179(Port Of Defect(DCSG01015961)
 Delayed response while application firmware and IOs running(DCSG00759013(Port Of Defect(DCSG00775564)
 CLI application shows improper error import message after successful Foreign import(DCSG00915940(Port Of Defect(DCSG00970535)
 Controller marks a drive UBUnsp if the server is rebooted while running Sanitize Overwrite(DCSG01141274(Port Of Defect(DCSG01165082)

EnhancementRequests:
 Spell Checking Corrections Part 1(DCSG00561599
 Update ControllerInfo Structure with PartNumber - API Changes(DCSG01064529
 ATA Passthrough handling of ATA commands(PIO DATA IN) obsolete in latest ATA specification for backward compatibility(DCSG00999763
 Safestore: MegaRAID key management feature: temporary key escrow(DCSG00918486
 Clean up include files(DCSG00977963
 added new BST file for shenandoah(DCSG01108340
 SPILIB2: Add support for new Cypress parts via proprietary CFI Method(DCSG00734502
 MPI 2.6: Header file changes associated with revision 2.6.11(DCSG00293141
 pl: backend PCIe: target link speed diag command(DCSG00757333
 Update XSDs with Proper Active High/Low Flags for GPIO_LED_GLOBAL_FAULT(DCSG01082422
 Snapdump: Remove duplicate entry in additional battery statistics(DCSG00951438
 Reorder Snapdump files for reliability(DCSG01008677
 Add PSoC 6 FW to Catalog File(DCSG01107483
 Add Firmware Version 9 for PartNumbers 29211 and 29651 to PSoC Catalog Image(DCSG01136458
 Atlas1 VS BST framework and deployment(DCSG00548501
 Assert Audit : Memory Allocation Asserts(DCSG00816160
 PEX89000:Use SDB to inject errors in Error Counter BST testcase(DCSG01079551
 Assert Audit 7.18: remove 18 from ddf(DCSG00914502
 Add support to srcgen.py and binToRom.exe to store Vision HW/FW version, board type and Version string info for HW/FW/type compatibility checks.(DCSG00920667
 Create offload expected status field in NVSRAM(DCSG01098154
 SRAM layout changes for code coverage(DCSG01026846
 Assert Audit : Memory Allocation Asserts(DCSG00816162
 Add Firmware Version 6 for PartNumbers 29211 and 29651 to PSoC Catalog Image(DCSG01126019
 Enhance autoimport to prioritize existing configurations over foreign config(DCSG00430812
 Update linker script file for mbed TLS component(DCSG00966563
 Assert Analysis : Removing FC/CS/BLOCK/PAGE checking(DCSG00527882
 Integrate MPI 2.6.11 headers(DCSG00408836
 Assert Audit 7.18: remove 2 from fw/hw(DCSG00919003
 Remove two Asserts from code(DCSG00424055
 SPILIB2: Eliminate incompatible erase commands in MultiErase mode(DCSG00830450
 Remove unnecessary assert from code(DCSG00816200
 Remove old MCTP OEM-conditional code(DCSG01016044
 Add Interposer PSoC 6 FW to Catalog File(DCSG01121802
 Update 9500-16i, 8i channel XMLs to support new VPP backplane management device address.(DCSG00351950
 Dump code coverage counters for Ondemand Snapdump(DCSG01020724
 Check in the build system's supporting function that can checks print statement consistency(DCSG00977490
 SPILIB2: Add support for serial mode for parts with QE=1 and dual mode support(DCSG00831421
 Add Lmid/Smid local/host mem dump into SD(DCSG00289727
 Add partial xml for 9502-16i Controller OCP form factor(DCSG00961958
 Integrate SPILIB 2.0 into MR Firmware for Aero, Sea and Ventura(DCSG00040487
 SPDM feature compile out from FW code(DCSG00707071
 Release Automation: Assign release type when creating ROP(DCSG00941419
 Add control command MFI_OOB_MCTP_CONTROL_EXCEPTION_NO_CMD (0x99) in API(DCSG01065378
 Add Firmware Version 7 for PartNumber 29211 to PSoC Catalog Image(DCSG01128627
 secureSignSPDM: implement automation to revoke device certs, check CRL and check revocation status for a device cert(DCSG01004627
 [UBM] Add detection of SAS/SATA drive with UBM backplane supporting IFDET2# and PRSNT#(DCSG00945423
 Add Firmware Version 5 for PartNumbers 29211 and 29651 to PSoC Catalog Image(DCSG01123516
 Atlas_BST:Enhancement for atlas bst to run on shared as well as developer systems(DCSG01002782
 SPILIB2: Add High Level SPI Emulation Library(DCSG00508974
 Reorder Snapdump data collection for reliability(DCSG00991989
 Add NVDATA option to change DMA Activate FIS timeout value.(DCSG00952761
 Adding support for FBU05/CVPM06 supercap in MR FW(DCSG00784854
 Assert Audit 7.18: traceTool.py improvements(DCSG00840391
 Update PSoC Bootloader Design in MR FW for PSoC 6(DCSG01107508
 Spell Checking: dictionary improvements(DCSG00906838
 MR SAS Multipath Improvements(DCSG00956036
 Integrate OEM BST scripts to align with mainline BST scripts(DCSG00946945
 Update PSoC MR FW Downgrade Block MFI_STAT to be More Clear(DCSG01155856
 Get controller PSOC version information thru host interface(DCSG00416991
 Add Reboot logs for windows Cache Offload BST(DCSG01074472
 PEX89000: Veloce Cosim Dev BST framework(DCSG01001901
 Atlas2 BST ER: PCIE and SysDMA feature BST Evaluation for COSIM(DCSG01006212
 Snapdump improvement - dump NVRAM key info(DCSG00951413
 Enable MFC Workaround for Sea iMR(DCSG00987792
 Support flash usage above 4 MB(DCSG01006737
 Remove SASPARSER binary from Release Order(DCSG00957868
 Add Firmware Version 10 for PartNumbers 29211 and 29651 to PSoC Catalog Image(DCSG01136459
 Run basic Atlas devBST test on Atlas2 RDK(DCSG01003413
 FDE logging improvement: consolidate VKI_PRINTF(DCSG00904945
 Dump code coverage counters on controller reset(DCSG01005809
 SATL : ATA Passthruough command handling when Datalength in MPI < data requested to drive(DCSG00833193
 Create adjusted code coverage reports(DCSG01050388
 iMR Bring-up Effort(DCSG00980238
 MegaAPI_PVT: Move VPD get DCMD from private to public API to Enable end user tools to read custom SN(DCSG00950711
 API change to support PD sanitize operations - overwrite SA(DCSG01006007
 Spell Checking Corrections Part 4(DCSG00712295
 Atlas2 BST ER: Multi host flash boot: create synthetic hierarchy and basic EP and config traffic(DCSG01021605
 Code Space Optimization(DCSG01017044
 SPILIB2: Support for Additional SPI Clock Frequencies(DCSG00424412
 Assert Audit 7.18: remove 17 from raid(DCSG00914508
 Spelling Checking: ONFI corrections(DCSG00735615
(DCSG01082488
 Assert Audit 7.18: merge asserts and adjacent prints(DCSG00904198
 PL SATA : Read logpage 12 and 13 during SATA initialization to get features supported for NCQ encapsulation using FIS porting(DCSG00779724
 API changes to support Multi-LUN / Multi-Actuator : SAS Device only Report as Unsupported Device(DCSG00921455
 Improve a print error message in traceTool.py(DCSG00945787
 Add Sea iMR Firmware Profile Updates(DCSG00980256
 PEX89000: Update Cosim DevBST framework to support launching simulation from outside user shadows(DCSG01093267
 Remove allocation of PCIe devices when NVMe is disabled in NVDATA(DCSG01015478
 XSD : Add New field 'SupportMultiLUN' in MPI2_MR_PARAMS_PAGE_0 to control multi-LUN drive support(DCSG00921459
 SPILIB2: Port all changes AV1 to AV2 for manual access files(DCSG00917802
 Add PERC Signing Build Targets to fwSConstruct(DCSG01071385
 StorCli doesn't show drive information when drive is in Unconfigured Bad or failed state(DCSG00416977
 Add Scons checking for code coverage(DCSG01026819
 PEX89000: Add fancontrol.py and vtmon.py to the common folder of Dev BST(DCSG01004789
 PEX89000: Update BST framework for Linux host and other enhancements(DCSG01062557
 Support downloading of the Host-based Trace Buffer (HTB) via MCTP OOB Interface on Ventura/Aero IOC/HBA (Part A)(DCSG00500554
 Assert Analysis : Refining Read Parameter Logic(DCSG00546986
 Assert Analysis : CDMA Prepare Descriptor Function(DCSG00547825
 Reintroduces the previous security page as MR_MPI26_CONFIG_PAGE_SECURITY_1 to align with current NVDATA(DCSG00977495
 Add Firmware Version 11 for PartNumbers 29211 and 29651 to PSoC Catalog Image(DCSG01149460
 Connector Order change for 9502-16e controller(DCSG00966344
 Improve FDE debug code readability with different debug levels(DCSG00417144
 Update Atlas2 A0 Dev BST test cases(DCSG01003416
 PEX89000: Single host MPT BST support on Veloce(DCSG01024714
 Spell Checking: dictionary updates(DCSG00926801
 Block Multi-LUN / Multi-Actuator : SAS Device only Report as Unsupported Device(DCSG00907506
 Spell Checking Corrections Part 2(DCSG00562226
 Add a tool for code coverage(DCSG01000074
 SAS phy port configuration of UBM connected phys based on UBM DFC Link width.(DCSG00927212
 Improve python handling during code coverage builds (MR)(DCSG01040296
 PL SATL : Add SAT translation for the Concurrent Positioning Ranges VPD page(DCSG00927210
 Disable MFC Workaround for Sea iMR(DCSG00987794
 Spell Checking: dictionary management(DCSG00926794
 Sea iMR Bring-up Effort (Part 2)(DCSG00980236
 Remove the Standard IO Header from cache offload module(DCSG00985595
 UBM error handling improvements and debug statistics data collection(DCSG00903198
 Release Automation: automate rebase operation for phase specific streams(DCSG00950531
 Mode Page Improvements for Changeability(DCSG00777318
 Added random number to FTP dir name to prevent signing hang.(DCSG00995197
 Sea iMR Bring-up Effort (Part 1)(DCSG00980231
 Assert Audit 7.18: remove 11 from cfgi(DCSG00914498
 Enhance Atlas1 TS BST to include Buffer ID Support(DCSG00985646
 Add PD_ORDER_MARKER_NVRAM for enhancement DCSG0040(DCSG00834868
 Add code coverage configuration(DCSG01005808
 Spell Checking Corrections Part 3(DCSG00575522
 Update SAS 3.5 FW summary release notes(DCSG00979878
 Add Firmware Version 3 for PartNumber 29211 to PSoC Catalog Image(DCSG01116340
 Add Firmware Versions 27 and 1 for PartNumbers 15987 and 25731 to PSoC Catalog Image(DCSG01166118
 Spell Checking Corrections Part 6(DCSG00963337
 DRAM layout changes for code coverage(DCSG01010648
 Assert Audit 7.18: remove 3 from DM(DCSG00918910
 Add Code Coverage infrastructure(DCSG00981200
 Remove some whitespace from the config page firmware(DCSG00968465
 SPILIB2: Support ECC for Margay(DCSG00429625
 Remove unnecessary assert from code(DCSG00423376
 Enable collection of PCIe Link event "RECEIVED_NAK_DLLP" (EventCode=0x08) by default(DCSG00122084
 Integrate the Atlas BST into CQ(DCSG01011490
 Assert Audit: checked assertion improvements(DCSG00758401
 Improve code coverage statement counting near prints(DCSG01031751
 [Aero] Enable UBM detection logic on all connectors for OEM HBA with SEP_PRESENT GPIOs(DCSG00927207
 Spell Checking Corrections Part 5(DCSG00734528
 Sea iMR Bring-up Effort (Part 1-2)(DCSG00986031
 Add Vision sources to cpld_src(DCSG01082289
 Blackduck: Remove non UTF-8 encoding characters from source files(DCSG00258258
 Add 9502-16e board Nvdata to Aero ROP(DCSG00966467
 Update BinToRom for Multiple PSoC Images(DCSG01063758
 Release Automation: Update scripts for FW Ph21(DCSG01008758
 Create Partial XML for 9502-16e HBA(DCSG00930106
 Snapdump Enhacement - SES Module(DCSG00952775
 NVRAM Dynamic sections needs to be cleared during CTRL REPURPOSE(DCSG00408254
 Spell Checking: checkSpelling.py improvements(DCSG00746454
 Release Automation: Check for failure during baseline creation(DCSG00958012
 PL SATL : Update the WRITE SAME command to account for Zoned Block Devices(DCSG00500552
 Spelling Checking: COL corrections(DCSG00734457
 Add OEM build action to SCONS(DCSG00996371
 Add XSD files for Sea iMR(DCSG00980244
 MegaAPI: Add API changes for blocking import on JBOD (def: 1030129)(DCSG01035264
 Clean up inline functions(DCSG00984425
 Add Firmware Version 12 for PartNumbers 29211 and 29651 to PSoC Catalog Image(DCSG01159010
 Q-depth optimization to improve read performance for R10 and other array configurations with spanned arms(DCSG00914358
 Add Firmware Version 8 for PartNumbers 29211 and 29651 to PSoC Catalog Image(DCSG01130658
 Assert Audit: add snprintf, vsnprintf(DCSG00735103
 Enable Slavebypass Error interrupt for Sea iMR(DCSG00987773
 SPILIB: Add support for Hybrid topology CFI parts(DCSG00782279
 SPILIB2: Add serial mode support for SPI devices with read only Quad Enable bits. Add hybrid dual mode support.(DCSG00916467
 Atlas1 VS BST deployment(DCSG00985647
 Improve python handling during code coverage builds (fw_bld_tools)(DCSG01040300
 PEX89000: Add multiple SPI device access devBST tests on SPI1(DCSG01003417
 MR7: Block Out-of-Order insertion of drives during Foreign Import with Pinned entries(DCSG00405605
 PEX89000:Veloce Cosim Dev BST error counter testcase(DCSG01006209
 secureSignBin: implement feature to download the public key during signing or with explicit arg(DCSG01035866
 Enhance out of order insertion feature to support R1 & R10(DCSG00903546
 PL : Remove obsolete workarounds(DCSG00008204
 DM Error code handling - UA / SES Inquiry after Expander micro code update.(DCSG00231452
 Move to the latest mbed_tls version which is 2.26.0(DCSG00966339
 Support streaming of debug logs (HTB) via I2C OOB band on Ventura/Aero IOC/HBA (Part B)(DCSG00927213
 LD Secure Erase and Progress Reporting(DCSG00931395
 Spell Checking(DCSG00547922
 secureSign add support for -sha2 passthrough to signImageX and updates to secureSignSPDM for NIC board team(DCSG00977399
 Add Atlas2 A0 devBST for automatic CQ launch(DCSG01003423
 SPILIB: Update build scripts for ADS(DCSG00943761
 Enable DASEP detection on SASA for Adapters(DCSG00983302(Port Of EnhancementRequest(DCSG01071382)
 Bad Phy detection logic improvement(DCSG00932841(Port Of EnhancementRequest(DCSG00977228)
 Update ControllerInfo Structure with PartNumber(DCSG01063757(Port Of EnhancementRequest(DCSG01074470)
 Disk labels need to be tied to fixed physical ports in order(DCSG00240927(Port Of EnhancementRequest(DCSG00966521)
 Workaround to block UBM I2C traffic while flashing MR FW(DCSG00836954(Port Of EnhancementRequest(DCSG00838610)
 Enable DASEP detection on SASA for Adapters(DCSG00983302(Port Of EnhancementRequest(DCSG00990994)
 Disk labels need to be tied to fixed physical ports in order(DCSG00240927(Port Of EnhancementRequest(DCSG01015974)
 Passthrough Support for Vendor Specific NVMe Opcode D9h and C0h(DCSG01128891(Port Of EnhancementRequest(DCSG01151746)
 Extending SnapDump Persistence(DCSG00247000(Port Of EnhancementRequest(DCSG01015971)
 Create new profile with only SAS/SATA drive support for new controllers for DASEP backplanes(DCSG00991280(Port Of EnhancementRequest(DCSG01070765)
 Change locking mechanism for OEM(DCSG00543073(Port Of EnhancementRequest(DCSG00861750)
 OEM Adapter FW assertion after flashing 16MB Image (Clean Flash)(DCSG00989390(Port Of EnhancementRequest(DCSG00991778)
 cryptographic erase for ISE drives is supported on sysPDs disks(DCSG00552703(Port Of EnhancementRequest(DCSG00775569)
 SEKM feature enhancements to handle error scenarios(DCSG00777328(Port Of EnhancementRequest(DCSG00903186)
 NVMe Passthru command support(DCSG00432879(Port Of EnhancementRequest(DCSG00966518)
 Enhance Error scenario handling in SEKM Feature code(DCSG00966411(Port Of EnhancementRequest(DCSG00974796)
 Add PSoC Image Checking and MR FW Blocking(DCSG01064530(Port Of EnhancementRequest(DCSG01074471)
 Host SES access and management of backplanes should not be allowed.(DCSG00974114(Port Of EnhancementRequest(DCSG00995207)
 Sea iMR CBB Updates(DCSG00980247(Port Of EnhancementRequest(DCSG01032931)
 LKM compliance to Cryptographic Algorithm Requirements v1.5(DCSG00830702(Port Of EnhancementRequest(DCSG01015968)
 Extending SnapDump Persistence(DCSG00247000(Port Of EnhancementRequest(DCSG00966519)
 SEKM Support for IT controllers(DCSG00433132(Port Of EnhancementRequest(DCSG00777312)
 Remove Retries When INQUIRY for Extended VPD Page 86h Returns 5/24/00(DCSG00922081(Port Of EnhancementRequest(DCSG01015964)
 Error handling of UBM CHANGE_DETECT# signal(DCSG00962565(Port Of EnhancementRequest(DCSG00963253)
 [SPDM] Blocking slots 1-7 from configuring SPDM certificates(DCSG00500296(Port Of EnhancementRequest(DCSG00507210)
 Do not generate "Bad Phy" event for NVMe drives that fail NVMe Init(DCSG00543046(Port Of EnhancementRequest(DCSG01070337)
 Pinned Cache: In legacy BIOS mode, if pinned cache is present, do not boot to OS(DCSG00366448(Port Of EnhancementRequest(DCSG00915777)
 [Aero][PLDM] Platform changes to accommodate latest PLDM baseline(DCSG00447989(Port Of EnhancementRequest(DCSG00500775)
 MR FW Need a smooth and authenticated method to transition from LKM to EKMS (SEKM)(DCSG00318546(Port Of EnhancementRequest(DCSG00432105)
 SEKM: Prevent firmware Download of firmware that do not support SEKM when SEKM is enabled.(DCSG00549524(Port Of EnhancementRequest(DCSG00816022)
 NVMe Passthru command support(DCSG00432879(Port Of EnhancementRequest(DCSG01015970)
 Remove Retries When INQUIRY for Extended VPD Page 86h Returns 5/24/00(DCSG00922081(Port Of EnhancementRequest(DCSG00966515)
 Create new profile with only SAS/SATA drive support for new controllers for DASEP backplanes(DCSG00991280(Port Of EnhancementRequest(DCSG01069429)
 Do not generate "Bad Phy" event for NVMe drives that fail NVMe Init(DCSG00543046(Port Of EnhancementRequest(DCSG01070769)
 Update and Add PSoC Image Building Batch Files(DCSG01063756(Port Of EnhancementRequest(DCSG01074467)
 LKM compliance to Cryptographic Algorithm Requirements v1.5(DCSG00830702(Port Of EnhancementRequest(DCSG00966516)


Version 52.17.0-4093 - Moderate Impact/Low Probability of Occurrence
-------------------
    BIOS:7.17.00.0
UEFI Driver:0x07110200
HII: 07.17.02.01
MR FW: 5.170.02-3532
    package 52.17.0-4093
MR 7.17

Defects:
-PL SATA Only : SATA PFA drive is not recognized as PFA drive in Aero while hot-plugging.(DCSG00427743
-Native Hidden VDs become Unhidden VDs after rebooting and doesnt clear clean shutdown flag in DDF.(DCSG00422736
-Assert Audit: remove 2 related to NVME.(DCSG00425107
-Some drives and enclosures not added to Windows OS when SAS/SATA devices are reduced in NVDATA..(DCSG00654062
-MR7.16: R1 VD showing WJ messages with Pinned cache..(DCSG00379794
-Enable planned virtual drive removal feature using NVdata.(DCSG00412149
-Aero MR7.16 Alpha - Typos streamDetectec in crashdump.txt with commands pending debug.(DCSG00370205
-[NVMe] Firmware download in mode E failed with error Invalid Firmware Image.(DCSG00313245
-[Code Review] Updated CoreDump related data structures to have capitalized first letter for the member fields.(DCSG00250948
-Aero MR7.17 Alpha - Missing ME Events on PD during recovery.(DCSG00707151
-[NVMe] Send diagnostic to abort background test completes with success when no background test started..(DCSG00310330
-SPDM IT:SPDM BMC bring up on P2 server.(DCSG00238540
-Aero MR 7.17PA - After SMC legacy bios boot message, snapdump content is missing.(DCSG00412164
-MR 7.16 Alpha: Uart Typo.(DCSG00358488
-Fix invalid Enclosure ID for NVMe drives that failed init after Atlas only power cycle.(DCSG00418131
-Initiate OOB FW download on the Ctrl while flashing the FW from in-band led to Exception mon_task.(DCSG00431713
-Aero MR7.17PA2 - NVMeFailedDrives still listed after Atlas enclosure is powered off.(DCSG00513680
-Assert Audit: remove 4 related to memory allocation.(DCSG00429630
-RDE - Firmware is not logging "WriteCacheDataLoss" RDE alert.(DCSG00316889
-MR 7.16PA1: Assertion failure in fw\hw\ioa\ioDivertHw.c at line 340: newVal >= 0.(DCSG00321422
-Aero: PL with newer Atlas FW (4.2) has extra slot number in the Atlas enclosure.(DCSG00284238
-Format Repair operation fails on certain NVMe drive.(DCSG00408635
-IML error code 0x1945 logged on every boot without any drives connected to controller.(DCSG00315354
-[NVMe] Protect bit is always set in standard inquiry data for NVMe drives..(DCSG00301661
-Assert Audit: remove 1 related to Preboot.(DCSG00500238
-[NVMe] SCSI TUR command fails when sent to a NVMe drive with corrupted LBA 0.(DCSG00299624
-Blocking SAS Link Speed change for unconnected PHYs.(DCSG00779179
-MR7.16 Alpha: Deletion of VD's with Pinned WJ on WT VD's causes firmware to crash.(DCSG00394228
-4K Rand write test got poor performance from 4 drives RAID5 unexpectedly.(DCSG00918259
-Flash failed and flash degraded RMA's.(DCSG00362663
-Aero MR 7.16PA - Typos in crashdump.txt and TTY "Outstadning IO list".(DCSG00354205
-[NVMe] Mode Select command to write Read Write Error recovery page fails..(DCSG00307175
-[VSes] Connector name of the VSes device in SAS device page 0 has invalid data if no device is connected to port 0.(DCSG00383998
-MR 7.16 - FW hit Exception mon_task when rebooting with pinned_cache.(DCSG00324739
-Fix unnecessarily generated fatal event in status process for unlock PD.(DCSG00378774
-[Aero] Phase 18 build error fix.(DCSG00708175
-Aero MR7.17PA - Duplicate entries in nvme init error list after drive pull/push.(DCSG00408157
-Hibernate with rebuild result to PL Fault on 9440-8i controller.(DCSG00776334
-Fix FW hang on MR 416i/216i controllers when EKMS is enabled.(DCSG00434047
-MR 7.16 Beta: Firmware is not handling unpinned WT interrupted writes for LDs that are missing/offline during bootup.(DCSG00409426
-Fix for allowing offline VD to be set as bootdrive.(DCSG00925005
-pl: NVMe: status code type not checked upon Write Buffer callback.(DCSG00419779
-Aero MR 7.17PA - Snapdump assert only shown in PTB file, add to UART and other logs.(DCSG00420417
-Fixed coverity defects..(DCSG00258253
-Customer: Found "C0: Dumping poll data. total length = 3, objtype 0", these message coming to uart firmware log continuously after update BMC.(DCSG00349880
-Fix Controller hang after snapdump generation in Legacy BIOS pre-boot.(DCSG00342843
-MR 7.16 Beta: RMW assertion on Q Parity with Pinned WJ.(DCSG00408663
-RDE - REST client displays junk character at the end of drive firmware revision.(DCSG00306782
-Coverity found defects for converting an expression to a narrower type in SATL code..(DCSG00297461
-PL fault: Invalid Msg Frame fault triggered on external card connected to UBM BP.(DCSG00408493
-[VSes] SCSI State not correctly set for some error response to SCSI commands..(DCSG00312554
-[NVMe] Extended Self Test Completion time in Control mode page is byte swapped.(DCSG00308453
-RDE - REST client displays ServiceLabel property of storage resource as Slot=<pci_slot_number> instead of Slot <pci_slot_number>.(DCSG00306804
-BST Failure: 7.16 Sanitize Changes Break Dev BST.(DCSG00311542
-Update EOS token checking for Ruby drive.(DCSG00332811
-pl: NVMe: async event handler proceeds during IO quiescing.(DCSG00431716
-Relax reboot required for PTB and Snapdump properties.(DCSG00487206
-Element Status code of a Slot in SGPIO BP with no drive marked as 'Unknown'.(DCSG00428815
-MR 7.16 Alpha: KA observed after many loops of cable push/pull to enclosures.(DCSG00365625
-MR 7.17 PA1: Unable to change bios mode through storcli.(DCSG00420496
-Aero MR7.16: Moved NVRAM debug mprintf to etprints..(DCSG00336300
-pl: SAS IO Unit Page 1 Write Current may not cause phy to be enabled.(DCSG00654031
-Add SSD Wear Gauge statistics reset to begin with.(DCSG00415054
-[NVMe] TSD bit not getting set in Reference Temperature log parameter.(DCSG00430063
-MR 7.16A controller continuously dumps unexpected sense 7/20/02 for a Jbod and the drives cannot be erased..(DCSG00363682
-Fix Patrol read exclusion behavior for non-EPD HDD VD.(DCSG00313121
-Update SBLIB version in BST version file.(DCSG00316342
-MR7.17-Assertion failure in fw\raid\cache.c at line 4379: while de-staging pinned WJ.(DCSG00500757
-Update the Driver Trigger Page data structs' size and add padding to make them 256 bytes.(DCSG00258095
-Scrutiny Aero failed at Run Eyescope as "Initialization failed, EyeScope will not run!" while connecting Aero to Atlas..(DCSG00362708
-Performance drop of 5-9% seen with Random Read/Write IOs to NVMe drives..(DCSG00258412
-MR 7.16 Alpha FW PK 3644 changes Disk order in Windows Disk management and makes a VD insonsistent which was not pinned..(DCSG00358927
-[SPDM IT] Return actual size of certificate chain content to SPDM LIB.(DCSG00233805
-Fix Coverity issues.(DCSG00293500
-fix typo.(DCSG00433182
-MR_7.16_DBU_PA1: EPD's lost after test configuration upgrade from 7.15 to 7.16.(DCSG00311528
-NVMe : PROTECT bit in inquiry data is set..(DCSG00308451
-pl: Incorrect c0 values displayed for SAS/SATA in the "pl serdes tx" output.(DCSG00422289
-Fix a print statement related to region lock.(DCSG00433052
-fix unnecssary print messages.(DCSG00751354
-RDE - Fix OEM reported observations.(DCSG00333013
-MR_7.17_PA1_DBU:ERROR- Exception Handler Called for Processor Core = 0 during OnDemandSnapDump IOCTL fire on Ventura IMR.(DCSG00426994
-Controller hang is observed during system reboot.(DCSG00547412
-Assertion failure in fw\raid\fwDownload.c at line 1182 observed, while downloading the Atlas FW in "Atlas Behind Aero" configuration.(DCSG00354677
-RDE alerts are not logged for predictive failure drives on AROC controllers.(DCSG00316767
-Aero: HW Workaround - When Aero is in the L1 state it periodically (every 2 ms) transitions to L0 and back to L1.(DCSG00501537
-VSES getting removed in OS on controller reset..(DCSG00301631
-Update coverity.conf.(DCSG00405664
-Aero MR7.16PA - NVMe PDs use sanitize path for /c0/ex/sx start erase crypto but FW and storcli report NO for sanitize support.(DCSG00352790
-Address review comments of CSET DCSG00335901 and cleanup for Defect DCSG00325884 fix.(DCSG00369965
-After running a Media error injection script on VDs overnight, CC not progressing until after a reboot.(DCSG00299417
-[Aero] SAS SATA only partial nvdata xml are not included in release order..(DCSG00394146
-Assert Audit: remove 2 related to memory allocation.(DCSG00427605
-RDE - Change the format of command header ETag.(DCSG00417320
-Energy pack failure events logged twice by firmware.(DCSG00345394
-[NVMe] Mode select command to set Control Mode page with last two bytes changed completes successfully..(DCSG00315331
-Firmware event format of failed NVMe drive is not as per OEM's requirement.(DCSG00321894
-PL Backend PCIe : SATA drive discovery is delayed.(DCSG00310045
-MR7.16 PA1: Missing punctuation in HII Critical message Number of disks exceeded the maximum supported count.(DCSG00315797
-MR 7.17_SLT: PD erase shows success for the enclosure.(DCSG00547453
-Coverity issue.(DCSG00293875
-RDE - REST client display for drive model number of specific NVMe drive is not in sync with host application output.(DCSG00330586
-MR 7.17 PA1: Controller encountered an error and was reset during cable pull/push test.(DCSG00417818
-RDE - REST client displays "HotspareType" as "Chassis" for a dedicated hotspare drive.(DCSG00404756
-MR 7.16 Alpha: Error when trying to stop erase on a SATA ISE SSD.(DCSG00370489
-WJ dev defect - Remove extra init_cache in RecoverPinnedWJandRMWForLd.(DCSG00369213
-Ring buffer decoder GUI hangs if timestamp is invalid.(DCSG00437238
-MR 7.17 PA1: During Patrol Read Kioxia NVMe drives reporting sense data 3/11 media errors with no LBA info.(DCSG00427380
-pl: NVMe: chain to PRP SGL for non-read/write IO may be handled improperly.(DCSG00408313
-Enclosure insertion event does not display controller port information.(DCSG00299141
-Assert due to ptbPrintf.(DCSG00335823
-[NVMe] Inquiry command to NVMe device reporting old rev firmware after drive firmware update completed successfully.(DCSG00321504
-RDE - DriveInserted RDE alerts are generated when pause for boot time password is enabled on the controller.(DCSG00347569
-Assert Audit: remove 6 from the PTB feature.(DCSG00405628
-Ventura/Mercator: pl: direct attached SAS or SATA device may not be discovered.(DCSG00408109
-Fix Coverity tool reported defects.(DCSG00266266
-Aero Core0 exception during Atlas sg_write_buffer enclosure FW update.(DCSG00380775
-Assert Audit: remove 1 from drive spinup.(DCSG00405647
-README file mentions sas2parser instead of sasparser.(DCSG00394150
-PL SNTL : Accumulated Power On Hours value reported by LogSense translation is byteswapped.(DCSG00499729
-MR7.17PA: Add additional debug to help debug unexpected TRANSIENT buffer.(DCSG00422398
-MR 7.17- DC with outstanding RMW commands on 16 drive R6.(DCSG00427249
-No warning message to inform user about lost cache when the BBU missing.(DCSG00480562
-MR 7.17 PA1:Media errors not detected on NVMe drive with VERIFY command supported.(DCSG00414020
-Shim layer is returning ERROR for successful FW image flash..(DCSG00707632
-[Ventura] Some NVMe drives are not discovered.(DCSG00301612
-Data abort while running Single glitch COL test: Exception due to executing THUMB instruction 0x6008 at address 0x7f83b9ac.(DCSG00920924
-RDE - REST client display for drive revision number of specific NVMe drive model is not in sync with host application output.(DCSG00330589
-MR 7.16 PA2: Uart printing typo.(DCSG00348407
-System hung with FW exception during COL Single dip test.(DCSG00359647
-MR 7.16PA2-WJ entries are not being discarded for R1 VD's..(DCSG00344241
-RDE - Drive encryption status should be shown as "Foreign" in REST client after drive pull/push of a FDE drive participating in a secured volume.(DCSG00261286
-Port name information is missing for SATA drive insertion and removal events.(DCSG00261173
-fix key signature mismatch due to wrong compare length..(DCSG00384375
-[NVMe] Send diagnostic with self test bit 1 but selftestcode non 0 is not failed..(DCSG00306498
-Move Version control files to folder for Release BST.(DCSG00342866
-Force Ruby support to Disabled for 7.16.(DCSG00827991
-MR7.16 PA2-Drive are coming up foreign when they should be doing a copyback after system reboot.(DCSG00358558
-StorCLI set OOB MaxPayLoadSize to 576 but after rebooting it changed to 64.(DCSG00415578
-Add a print to identify PTB merges.(DCSG00328310
-Aero 7.16PA - Storcli erase crypto to WD SAS SSD results in timeouts and core0 exception.(DCSG00350404
-RDE - REST client displays RAID1 with 8 drives as RAID1E instead of RAID10.(DCSG00253778
-Fix ETTY compression with initPrintf statements.(DCSG00398152
-MR 7.16 Data corruption after pinned cache and OCR on every block..(DCSG00352925
-Update EOS token checking for Opal drive.(DCSG00348250
-Remove .text from symbol_dump.txt in Snapdump.(DCSG00334539
-Fixed PH17 Coverity issues.(DCSG00335212
-[NVMe] PL Fault 0xE429 is seen while performing reset for certain NVMe drive..(DCSG00395750
-MR7.16PA2-WB vd stays WT/NORA after Pinned WJ.(DCSG00349052
-Aero 7.16PA: Undo NVRAM section forward migration fix..(DCSG00352663
-No power source was found for the memory during 48 hour Single glitch COL test.(DCSG00831482
-Enable ekms option is getting enabled in HII.(DCSG00543363
-Fix Opal function to relock PD.(DCSG00409615
-LSA MR 7.17: Under Raid Personality Mode, Changing the Behavior mode to R0 is not getting changed..(DCSG00422218
-Observed fatal FW error at Line 169 in fw\raid\utils.c on drive removal in a 240 VD configuration..(DCSG00394143
-MR 7.17: Changing the behavior mode to RO from None, is not making the UGOOD PDs as RO VDs in the presence of the PD with Prepare for removal state ..(DCSG00758604
-[Ventura][NVMe] Phy disable from application does not removed the drive from PL..(DCSG00384856
-Aero MR7.16PA - Linux driver remove/load test reproduces controller fault and snapdump on Aero NVMe config.(DCSG00312316
-Controller hits assertion failure after importing VD with pinned cache and resuming I/O.(DCSG00758169
-Uninitialized pointer access in UBM code..(DCSG00446918
-MR 7.16 PA1: uart printing errors.(DCSG00313340
-Address Coverity issues.(DCSG00263385
-iMR 7.16 Ventura controller, LED of every drive keeps blinking on Unconfig good drives and Online drives..(DCSG00382409
-RDE - Stale drive data is accessible post drive removal and inserting a new drive.(DCSG00258251
-Aero MR7.16PA - Assertion failure in fw\dm\src\dm.c at line 2034 during SAS/SATA/NVMe UGOOD crypto erase.(DCSG00342612
-Allow LKM to EKM switching from HII.(DCSG00808130
-DM NOT completing the device discovery.(DCSG00339945
-Unblock Sanitize Passthrough for JBOD on MR 216/416 controllers.(DCSG00431924
-MR7.16-DC with 16 Drive WB R5 pinned cache.(DCSG00536516
-Vision PSoC info prints added in Serial output for MR216i.(DCSG00382714
-Fix coverity reported defects.(DCSG00282926
-RDE - State property for Persistent Cache displays empty in REST client when energy pack is in charging state.(DCSG00247993
-[NVMe] Parameter Code in Self Test Results log page is incorrect..(DCSG00422250
-Able to import PD after FW treats VD/PD missing for RLM as Critical (OCR case).(DCSG00258652
-Add missing CCR registers to Snapdump.(DCSG00344073
-Aero MR 7.17 - CLI reports success for /c0/fall delete operation of foreign locked VD.(DCSG00405003
-fix the issue that WT cache did not get initialized before LD config is removed due to drive removal.(DCSG00340135
-MR7.17PA2: Autoconfig mode not reset to default on set factory command.(DCSG00507799
-MR 7.16PA2: FW continuously prints C0:In OOBExecCmdIssue and dmcd is 0x1010000 on customer controller.(DCSG00324215
-Complete degraded LD list was not getting printed in the UART.(DCSG00312959
-NVMe EPD reset is not allowed from SL\SLT.(DCSG00966337
-Assert Audit: add a new memory allocation interface.(DCSG00420016
-AXI access errors causing FW asserts or faults due to invalid SATA passthrough commands.(DCSG00215338
-Remove trailing whitespace from prints.(DCSG00397411
-Fix macro parsing in traceTool.py.(DCSG00433056
-Avoided the unknown IML event is getting generated..(DCSG00549320
-OEM: OOB SLT returns error 0x7004 when run SelfCheckingDiagnostic option.(DCSG00352769
-Make firmware build compilable without PLDM folder.(DCSG00299709
-MR7.16PA2- rename API in the FW code.(DCSG00335548
-Flashing PD FW under I/O over OOB led to Exception mon_task.(DCSG00408861
-Fix SSD Wear Gauge data for SAS/SATA.(DCSG00286608
-RDE - REST client displays incorrect value for "LanesInUse" property of storage resource.(DCSG00312188
-Assert Audit: minor changes from 11/11 review.(DCSG00424116
-WJ dev defect - WB vd stays WT after pinned cache deletion, WT LD pinned cache bitmap is not cleared.(DCSG00351776
-pl: backend PCIe: fix a couple of issues related to PCIe discovery and NVMe init.(DCSG00355408
-Assert Audit: remove 1 related to configuration DCMDs.(DCSG00431549
-NVMe Repair Operation hangs on a certain NVMe drive with Multiple Namespace.(DCSG00415462
-RDE - Controller serial number is inconsistent between device inventory and storage page.(DCSG00427599
-Fixing import issue for RAID 5/6 WT Secure VDs after entering boot time password in presence of pinned Write Journals.(DCSG00321918
-Release Automation: If release job web page takes more than 60 secs to load, script throws exception.(DCSG00297363
-MR7.16PA2-25 drive R5 is causing Assertion failure after pinned cache.(DCSG00350580
-Sanitize command support - Code review AIs and cleanup..(DCSG00378002
-MR 7.16 Alpha: Restore operation expected but not started message during COL double dip test with VDs in WT mode..(DCSG00383573
-Fix wrong ComID got assigned at drive type detection.(DCSG00311877
-MR 7.16 Alpha: Uart printing.(DCSG00384374
-Medium Errors Not discovered during copyback.(DCSG00734524
-MAC verification failed due to inconsistent secure ID.(DCSG00309854
-Aero MR 7.16: discardCacheDuringLDDelete bit is not set.(DCSG00369044
-Disallow the request to update SAS link speed /PCie lane speed for UBM backplanes..(DCSG00371417
-Assertion failure in fw\cpu\arm\exceptions.c at line 1006: 0 while running IOs in large config.(DCSG00423087
-MR7.16: Setting Patrol Read exclude SDD VD is not working.(DCSG00378708
-Update build scripts to map PLDM debug strings from flash to BSS section.(DCSG00298667
-Device order boot message is issued on next server reboot after performing purge operation.(DCSG00541268
-Fix data definition discrepancy between API and MR FW..(DCSG00383503
-Remove OEM PNPID checks for sg_utils sanitize PR,.(DCSG00319704
-MR 7.16 PA2: Uart printing errors.(DCSG00323893
-SnapDump should not contain sensitive data.(DCSG00335397
-MR 7.17-DC with 4 drive R5 RMW pinning.(DCSG00398245
-Revert NVSRAM Dynamic section DST_CTRL_PROP_NVRAM changes and Use NVSRAM Static memory area faultData region) to store MR_CTRL_PROP2 copies..(DCSG00347855
-Fixed dynamic SSD wear gauge updating mechanism.(DCSG00254753
-RDE - Move dictionaries from flash to DRAM section.(DCSG00263549
-MR 7.17 Alpha: After OCR where drive is pulled during OCR, controller comes back in safe mode even though VD should only be degraded.(DCSG00557518
-Aero MR7.16PA - snapdump hang during capture in Legacy BIOS.(DCSG00318700
-Assert Audit: fix typo.(DCSG00418053
-SPDMIT: Return appropriate error to SPDM Lib when read certificate from security page 0 fails.(DCSG00299079
-[NVMe] The long LBA bit is not set in Mode Parameter header..(DCSG00319580
-Virtual drives offline during Ibanez HBA firmware upgrade/downgrade test using storcli.(DCSG00343804
-MR 7.17 PA1: Excessive prints in etty log.(DCSG00408200
-Adjust I2C CLK frequency on all the controllers.(DCSG00421120
-EKM to LKM security mode transition is blocked..(DCSG00654089
-MR FW exception handler called when trying to discard pinned cache after failed attempt to import foreign config.(DCSG00420456 (Port Of Defect DCSG00552664)
-PL Fault 0xEA11 observed, while upgrading Atlas FW using StorCLI in presence of bad NVMe PD's present in the Atlas..(DCSG00324838 (Port Of Defect DCSG00340935)
-[Aero] Controller missing in System Bios..(DCSG00411545 (Port Of Defect DCSG00420098)
-SATA Only: Command timeout observerd on SATA drives.(DCSG00344039 (Port Of Defect DCSG00356008)
-Phy bad events are logged when Exp phyop is disabled.(DCSG00428690 (Port Of Defect DCSG00521372)
-Observed PL Fault 6231 while running IOs along with Expander phy link reset..(DCSG00363807 (Port Of Defect DCSG00373461)
-Device add/remove event sent with wrong enclosure handle in certain multi VSes topology..(DCSG00350248 (Port Of Defect DCSG00380548)
-During OS reboot some drives go missing..(DCSG00354770 (Port Of Defect DCSG00361759)
-Kill adapter seen on multiple EPDs with IOs with TMs.(DCSG00923995 (Port Of Defect DCSG00959011)
-LSA MR 7.17: Under Raid Personality Mode, Changing the Behavior mode to R0 is not getting changed..(DCSG00422218 (Port Of Defect DCSG00543346)
-Enclosure ID of some Switch attached NVMe devices missing after system reboot..(DCSG00414735 (Port Of Defect DCSG00426692)
-[3508 + MR7.14] Controller failed into ERROR: Exception Handler Called for Processor Core = 1 and Waiting for OCR is seen with Fatal firmware error: Line 169 in fw\raid\utils.c.(DCSG00953878 (Port Of Defect DCSG00959993)
-Flashing PD FW under I/O over OOB led to Exception mon_task.(DCSG00408861 (Port Of Defect DCSG00552878)
-Data abort while running Single glitch COL test: Exception due to executing THUMB instruction 0x6008 at address 0x7f83b9ac.(DCSG00920924 (Port Of Defect DCSG00923772)
-Extra ldbbmBadListAdd print was seen during ldbbm update.(DCSG00344606 (Port Of Defect DCSG00349552)
-4K Rand write test got poor performance from 4 drives RAID5 unexpectedly.(DCSG00951753 (Port Of Defect DCSG00960458)
-ParentDevHandle value calculated for given Phy Number is incorrect for Direct Attached Devices in Event Replay logic.(DCSG00299632 (Port Of Defect DCSG00299823)
-SEKM secured NVME OPAL drives over a warm reboot will lock and require the SEKM key..(DCSG00241201 (Port Of Defect DCSG00311638)
-Nested RAID level performance improvement.(DCSG00903237 (Port Of Defect DCSG00916849)
-MR7.18_Alpha:Foreign import from Mutli Span/LD drive with other drives cause, FW crash and import failure.(DCSG00949516 (Port Of Defect DCSG00960587)
-[SATA ATAPI] FW fault 0x6231 seen while completing some IO for ATAPI device..(DCSG00350047 (Port Of Defect DCSG00353918)
-FW halts when "ubm show " is triggred.(DCSG00312896 (Port Of Defect DCSG00932985)
-[MR3508+MR7.14 +X86 ] Controller is seen with Fatal error by unknown reason unexpectedly (XH628 V5's 3508 mem.c issue).(DCSG00312708 (Port Of Defect DCSG00316967)
-PL : Missing drives during AC power cycle test.(DCSG00275868 (Port Of Defect DCSG00301823)
-Parallel PD FW download should not be allowed in OOB I2C mode.(DCSG00935499 (Port Of Defect DCSG00935546)
-MR FW changes to Revert NVSRAM Dynamic section DST_CTRL_PROP_NVRAM changes and Use NVSRAM Static memory area faultData region) to store MR_CTRL_PROP2 copies..(DCSG00347965 (Port Of Defect DCSG00349563)
-NVMe Init error drives are not discovered after pull/push within DMD timeout.(DCSG00242197 (Port Of Defect DCSG00250023)
-SCSI Compliance 2.0 Failure ASSERTION: VERIFY (16) Exceed Capacity Test.(DCSG00957057 (Port Of Defect DCSG00960565)
-SATA only: WRITE SAME NCQ encapsulation assumes NonData NCQ is supported if Zero EXT is Supported.(DCSG00398894 (Port Of Defect DCSG00412030)
-Controller hits assertion failure after importing VD with pinned cache and resuming I/O.(DCSG00758169 (Port Of Defect DCSG00834149)
-Make Clear of the PEPP version of ConfigValid Applicable to IT Boot Code Only.(DCSG00398453 (Port Of Defect DCSG00404468)
-MR FW exception handler called when trying to discard pinned cache after failed attempt to import foreign config.(DCSG00420456 (Port Of Defect DCSG00552663)
-NVMe Init Error: Device with no namespaces shows 'Namespace count Invalid' as Unrecoverable Error.(DCSG00290593 (Port Of Defect DCSG00303510)
-RDE - WriteCacheProtected RDE alert getting generated across reboot/OCR without any changes in battery state.(DCSG00355897 (Port Of Defect DCSG00383420)
-PL NVMe : PCI task management is not getting completed..(DCSG00231422 (Port Of Defect DCSG00266053)
-Combination of Expander FW update and OOB inventory commands leads to Data abort exception..(DCSG00417301 (Port Of Defect DCSG00521370)
-HII Refresh Topology Hangs when connected to Faulty SES Device.(DCSG00385938 (Port Of Defect DCSG00404446)
-System bios hangs during initial drive discovery..(DCSG00312551 (Port Of Defect DCSG00382416)
-SHIELD state transition prints for PDs that are not installed on the system when a clear config is run with a rebuild running..(DCSG00454025 (Port Of Defect DCSG00543479)
-(SATA Only) IO Timeouts seen while running Unmap, SATA Passthrough and Read/Write IOs to a SATA drive.(DCSG00654439 (Port Of Defect DCSG00831921)
-StorCLI set OOB MaxPayLoadSize to 576 but after rebooting it changed to 64.(DCSG00415578 (Port Of Defect DCSG00552845)
-Delayed response while application firmware and IOs running.(DCSG00759013 (Port Of Defect DCSG00835563)
-Code changes to compare buffered Enclosure status page 02 needs to be removed..(DCSG00314803 (Port Of Defect DCSG00651595)
-[Aero][UBM] Enhance the link configuration to handle the link speeds for SAS/SATA drives behind UBM..(DCSG00552897 (Port Of Defect DCSG00706402)
-FW halts when "ubm show " is triggred.(DCSG00312896 (Port Of Defect DCSG00521366)
-PL: 9460-16i incorrect slot numbers assigned attaching to OEM specific mixed mode backplane.(DCSG00243953 (Port Of Defect DCSG00342787)
-Assertion failure in fw\cpu\arm\exceptions.c at line 1006: 0 while running IOs in large config.(DCSG00423087 (Port Of Defect DCSG00543477)
-Serdes TX table in pl diag dump has the Pre-cursor, Post-cursor and Attenuation values mixed.(DCSG00388268 (Port Of Defect DCSG00404448)
-Bad phy events are generated continuously after staggered hotplugging of bad drives in UBM backplanes.(DCSG00405552 (Port Of Defect DCSG00579741)
-9460-8i faults repeatedly at fw\raid\utils.c.(DCSG00265811 (Port Of Defect DCSG00334585)
-Dev-defect: WRITE with a transfer-size of 0 results in a hang..(DCSG00380906 (Port Of Defect DCSG00415495)
-Ventura: SAS3616W or SAS3616W based boards have links less than epected width.(DCSG00249594 (Port Of Defect DCSG00249753)
-OEM server Raid self diagnostic test fails test when the system has Raid but no HDDs.(DCSG00830628 (Port Of Defect DCSG00832446)
-9500-16e disappears on system reboot.(DCSG00367091 (Port Of Defect DCSG00414022)
-Storage controller goes through repeated resets and is not discovered by host.(DCSG00943829 (Port Of Defect DCSG00948302)
-Controller fault observed on changing some phys to manual port config with port set to 0..(DCSG00237498 (Port Of Defect DCSG00245531)
-Controller Faults when connected to DA SEP Backplane.(DCSG00916381 (Port Of Defect DCSG00918084)
-Aero A0: Controller faults 0xD015 with Refresh topology from BIOS in a managed PCIe switch config..(DCSG00414714 (Port Of Defect DCSG00418238)
-Modify DPN for particular battery type.(DCSG00340940 (Port Of Defect DCSG00342271)
-[Aero][PLDM] Date format exposed by IT to PLDM library is not as per PLDM spec.(DCSG00363642 (Port Of Defect DCSG00398739)
-Fix a print statement related to region lock.(DCSG00433052 (Port Of Defect DCSG00566794)
-[VSes] Element status set to 'Unknown' in SES page 2 of VSES for some phys where nothing is connected..(DCSG00333163 (Port Of Defect DCSG00343848)
-Add support back for NVMe opcode 0x4 (write uncorrectable error).(DCSG00427402 (Port Of Defect DCSG00500131)
-Snapdump logs are getting lost during OCR.(DCSG00426286 (Port Of Defect DCSG00543344)
-FW assert is observed while performing JBOD to GOOD and vice-versa on 8 NVMe drives connected behind Atlas and drive push pull is run in parallel..(DCSG00936303 (Port Of Defect DCSG00961699)
-Add infrastructure to provide connector index for applications to fetch connector name.(DCSG00325884 (Port Of Defect DCSG00371116)
-Out of bound memory access when assigning dma group for controller devices..(DCSG00243152 (Port Of Defect DCSG00243641)
-Data Abort seen while starting the copyback from OOB.(DCSG00431166 (Port Of Defect DCSG00521373)
-FW faults when generating an on-demand snapdump after single ECC error test.(DCSG00253370 (Port Of Defect DCSG00311642)
-Assertion hit while Expander Fw download in loops with phyop enable/disable.(DCSG00433696 (Port Of Defect DCSG00521375)
-0x6001 Fault running TMs with certain NVMe translated Host IOs.(DCSG00362831 (Port Of Defect DCSG00385767)
-[SATA Only] SCSI Start Stop Unit command with power condition active fails..(DCSG00349970 (Port Of Defect DCSG00353138)
-Firmware fails to send Enclosure removal event to host when the enclosure is removed from the topology..(DCSG00232962 (Port Of Defect DCSG00244617)
-NVME EPDs, with heavy IOs and TM from host side and NVMe passthru commands in loop from OOB. After 5-8 hrs hit KA.(DCSG00939439 (Port Of Defect DCSG00959006)
-MR 7.15 Alpha - Large IO Support is allowed to be changed, but can't be set.(DCSG00304321 (Port Of Defect DCSG00313289)
-MR 7.17 PA1: Excessive prints in etty log.(DCSG00408200 (Port Of Defect DCSG00926314)
-MR 6.14:While clearing the configuration sanitize running drives state has been changed from SANITIZE_IN_PROGRESS(4) to UNCONFIGURED_GOOD(0).(DCSG00146728 (Port Of Defect DCSG00215259)
-CLI application shows improper error import message after successful Foreign import.(DCSG00915940 (Port Of Defect DCSG00920227)
-0x6001 Fault while running driver load/unload with simultaneous NVMe drive pulls.(DCSG00378243 (Port Of Defect DCSG00385686)
-ExtManPage41 TX Values are not being applied / run by AERO SERDES.(DCSG00311524 (Port Of Defect DCSG00311739)
-Customer solution getting lower performance than benchmark platform in Random Read&Write.(DCSG00548054 (Port Of Defect DCSG00832401)
-Ventura/Mercator: pl: 4311 fault.(DCSG00918020 (Port Of Defect DCSG00928996)
-Ventura: Faults 0x0101 and 0x5805 Invalid LMID Index Seen after hundreds of cold boots.(DCSG00338118 (Port Of Defect DCSG00384000)
-ventura build issue with PL PCI DEVICE feature disabled.(DCSG00286358 (Port Of Defect DCSG00286361)
-OOB - Diag test fails when duration=180secs.(DCSG00381399 (Port Of Defect DCSG00384179)
-LED Blink/Unblink operation fails on certain Slots in UBM using MPI SEP Request.(DCSG00282826 (Port Of Defect DCSG00290200)
-PL NVMe : PCI task management is not getting completed..(DCSG00231422 (Port Of Defect DCSG00245537)
-PL SATA Only : Controller hang observed for ATA Passthrough command with count value set to 0.(DCSG00250952 (Port Of Defect DCSG00266833)
-PL fault 0xE40E observed accessing unconfigured MPI backend device registers through CLI cmd.(DCSG00234837 (Port Of Defect DCSG00238649)
-HBA hangs on boot with failed UBM backplane in a multi-UBM backplane topology.(DCSG00653774 (Port Of Defect DCSG00707464)
-Aero MR7.17 Alpha - Missing ME Events on PD during recovery.(DCSG00707151 (Port Of Defect DCSG00907155)
-When performed export csr for all 8 slots in batch observing for few slot command is success and for other it is failure..(DCSG00421812 (Port Of Defect DCSG00425171)
-Able to import PD after FW treats VD/PD missing for RLM as Critical (OCR case).(DCSG00258652 (Port Of Defect DCSG00543349)
-EID is not assigning back with IT controller restart.(DCSG00394045 (Port Of Defect DCSG00397565)
-When key exchange fails, encryption mode doesn't report failure.(DCSG00267743 (Port Of Defect DCSG00344588)
-MR 7.17_SLT: PD erase shows success for the enclosure.(DCSG00547453 (Port Of Defect DCSG00734514)
-Double AEN for JBOD is now secured event.(DCSG00293327 (Port Of Defect DCSG00311644)
-Drives connected behind external card with VSES disabled, failed to detect in Linux OS.(DCSG00350402 (Port Of Defect DCSG00363785)
-MR_7.17_PA1_DBU:ERROR- Exception Handler Called for Processor Core = 0 during OnDemandSnapDump IOCTL fire on Ventura IMR.(DCSG00426994 (Port Of Defect DCSG00941071)
-Bad Phy events are generated for UBM slots with element status = NO_ACCESS_ALLOWED.(DCSG00336611 (Port Of Defect DCSG00353452)
-[Aero/Ventura] Bootloader corruption with firmware download and DC cycle in loop..(DCSG00238233 (Port Of Defect DCSG00245454)
-DRIOE_SRetryExhaus for mid 1402 devId 1 isEpd 0 devH 1c pMpt 17933400. Failing IO tbIO=1 RC=5 reported on eacj devices after Driver unloaded..(DCSG00391062 (Port Of Defect DCSG00543274)
-On enclosure power cycle, previously configured drives come back as unconfigured good drives.(DCSG00525893 (Port Of Defect DCSG00914313)
-Secure erase operation fails on a Ubad NVMe Opal drive.(DCSG00343585 (Port Of Defect DCSG00349550)
-MR 7.17- DC with outstanding RMW commands on 16 drive R6.(DCSG00427249 (Port Of Defect DCSG00501377)
-OOB Debug logs does not capture all required logs..(DCSG00427927 (Port Of Defect DCSG00521368)
-Controller hangs after attempting to import a foreign config with a pending personality change..(DCSG00432564 (Port Of Defect DCSG00543342)
-[Aero][PLDM] PLDM FW discovery results in 265D Fault.(DCSG00307769 (Port Of Defect DCSG00330183)
-Able to flash from EKMS supported to non EKMS supported FW when EKMS is enabled.(DCSG00393114 (Port Of Defect DCSG00399185)
-When Enhanced BGI kicks in on multiple VDs, the print does not reflect the correct VD/LD id..(DCSG00353756 (Port Of Defect DCSG00356168)
-PBP: OEM storage app not reflecting PD removal.(DCSG00430563 (Port Of Defect DCSG00913673)
-Update the SPDM print index properly before adding the prints to ring buffer.(DCSG00335886 (Port Of Defect DCSG00337717)
-[NVMe] SCSI log sense command timeouts seen while running 1MB IOs to NVMe drive.(DCSG00136092 (Port Of Defect DCSG00237479)
-Incorrect PLDM firmware release date is displayed in BMC applications.(DCSG00926179 (Port Of Defect DCSG00959007)
-MR 7.17 Alpha: After OCR where drive is pulled during OCR, controller comes back in safe mode even though VD should only be degraded.(DCSG00557518 (Port Of Defect DCSG00920085)
-Remove LogSpecific member in the structure 'IOPI_LOG_DETAIL.(DCSG00318366 (Port Of Defect DCSG00318943)
-Drive changes from UG to UB, when user start the initialization followed by secure erase on same drive.(DCSG00837473 (Port Of Defect DCSG00957942)
-OEM UBM backplane Slot status LED Blinks only for 10 secs for NVMe VDs with Toggle Host LED management.(DCSG00323361 (Port Of Defect DCSG00380726)
-Last LDBBM entry in the list is not cleared after VD Deletion.(DCSG00255330 (Port Of Defect DCSG00257909)
-9500-16e fails to recover after warm boot.(DCSG00422618 (Port Of Defect DCSG00422813)
-PL: Reply to IO's bad SGL to Atlas SES has wrong DevH and SMID's incorrectly tries to fit 3 SGEs inframe.(DCSG00315476 (Port Of Defect DCSG00366033)
-RDE - Invalid PCI slot number being set for few RDE alerts.(DCSG00335901 (Port Of Defect DCSG00367086)
-As part of the Device Add\Removal Event, the enclosure handle passed on by the PL FW to the upper layer is incorrect..(DCSG00298128 (Port Of Defect DCSG00299826)
-Initiate OOB FW download on the Ctrl while flashing the FW from in-band led to Exception mon_task.(DCSG00431713 (Port Of Defect DCSG00543478)
-pl: backend PCIe: limit CRS retry count.(DCSG00312206 (Port Of Defect DCSG00324774)
-[VSes] Slot status is reported as 'Unsupported' for drives connected to UBM backplane..(DCSG00337912 (Port Of Defect DCSG00353069)
-PL NVMe : IOs fail with SGL length shorter than the transfer legth.(DCSG00501518 (Port Of Defect DCSG00735325)
-SPDM IT: Add memory allocation/free for SPDM_LIB.(DCSG00229260

EnhancementRequest:
-pl: backend PCIe: runtime control for lane margining debug console prints.(DCSG00373313
-RDE - Fill PartNumber and SKU based on the controller model.(DCSG00433340
-Convert free space in NVRAM to STATIC Section (NVRAM API portion).(DCSG00398092
-[NVMe] SCSI Send Diagnostic command translation for NVMe..(DCSG00261270
-Enhancement to source of randomness for generating key pair.(DCSG00208477
-Implement NVMe shutdown for MR7 programs (Followup PL changes. ).(DCSG00274125
-SMART Polling Improvement -New Dynamic Section to save New Controller properties structure in NVSRAM.(DCSG00248087
-pl: backend PCIe: CRS retry limit disable bit.(DCSG00325823
-Update SAS 3.5 FW summary release notes.(DCSG00384316
-Add a Snapdump fault code for printing errors.(DCSG00231367
-SPDM: add support for MCTP_CTRL_CMD_GET_MSG_TYPE_SUPPORT in MR as in IT.(DCSG00258208
-Add new events for - Block Multi-LUN / Multi-Actuator : SAS Device only Report as Unsupported Device.(DCSG00921464
-VSES: Removed loginfo code when the command is failed with a check-condition.(DCSG00235941
-Assert Audit : Ocm Copy - col_common change.(DCSG00437203
-Add an Allow List for symbol_dump.txt in Snapdump.(DCSG00340406
-Update the event logging when the "CoreDump" region is erased from ScrutinyCLI command.(DCSG00367325
-MR: Update to latest SNTL specification Phase 2.(DCSG00310363
-MegaAPI_PVT: Add API changes for Support WJ Pinning for both WB and WT Parity RAID VDs (PR: DCSG00166915).(DCSG00315910
-Assert Audit: Asserts are not required in the function which determines if NAND flash part is supported.(DCSG00421730
-[IT SPDM] Parse certificate to X.509 V3 Standard and verify digital signature to affirm chain of trust.(DCSG00218564
-[IT SPDM] Implement client APIs for SPDM Get Measurement command..(DCSG00256411
-Add version control file to build.(DCSG00242260
-Add OEM key signing support for local FW builds.(DCSG00548046
-MR FW Ruby SED Support.(DCSG00054998
-Shenandoah : Code Cleanup activity.(DCSG00385777
-Ventura/Aero: Request by MegaRAID to output debug data in vtboot.rom for future debug.(DCSG00420316
-RDE - Remove event schema property "EventType" for all RDE alerts.(DCSG00351956
-Use rubySupportOption to force dual featured FDE drives of Ruby and Opal to be detected as Opal drive only.(DCSG00360412
-RDE - Make changes to logging of few RDE alerts.(DCSG00335913
-Assert Audit: Removing asserts from the DEBUG module.(DCSG00433168
-Snapdumps will get deleted for FW upgrade/downgrade operation..(DCSG00290210
-[NVMe] Provide interface to reset NVMe drive after shutdown..(DCSG00109904
-Enable end user tools to read custom SN.(DCSG00938513
-Security Key page MPI definitions should more descriptive.(DCSG00336313
-MR PVT API Atomic LKM-to-EKM transition.(DCSG00426511
-Reset mechanism for OEM Pismo Beach Plus and Zuma Beach cards.(DCSG00347300
-Convert free space in NVRAM to STATIC Section.(DCSG00347347
-Fix NVRAM Dynamic Section Conflict issues.(DCSG00347343
-MR FW: Add CLI command to control Parity Read Cache Bypass for SSD VDs.(DCSG00342281
-SnapDump Enhancement: Implement _DumpBytesSkipZeros().(DCSG00302279
-Drives connected to OEM controller behind Atlas PCI switch HII bayID:Slot# enumeration.(DCSG00051210
-Adding Incremental progress events for Patrol Read.(DCSG00304274
-Snap-dump Enhancement - remove unnecessary duplicate prints.(DCSG00312222
-[Ventura/Aero] Block the OOB FW download when firmware update is in progress..(DCSG00249958
-Enable Legacy OpROM support for ALL OEM iMR and MR Ventura Family RAID adapters..(DCSG00310369
-Enable ONFI to print bad block debug print at default debug level.(DCSG00414717
-Added IOCParam to IOUnit Control command to allow periodic time-sync.(DCSG00235948
-[SPDM IT] Export CSR & Import Cert Open & Close Session.(DCSG00221406
-Support for sanitize command - passthrough.(DCSG00237038
-Add SES status page flags to debug prints.(DCSG00383509
-Release Automation: Add support for generating Ventura ROP.(DCSG00246102
-Aero Secure Boot: Add Key Update Pending Check for 'COMPLETE' Image Download.(DCSG00241566
-Add a build tool for spell checking.(DCSG00546011
-Assert Audit: Removing an unnecessary null pointer assertion.(DCSG00421720
-[Aero/Ventura]Fix Coverty issues in Phase_18 TIP.(DCSG00507240
-Total vSES Enclosure Slot Count value reported is incorrect in host tools\MR FW with NVMe drive which fails initialization.(DCSG00546745
-Examine passthrough code path and block inappropriate commands to LD.(DCSG00358710
-[NVMe] Prevent non Read/Write SCSI IO Timeouts while running heavy greater than MDTS RW IOs.(DCSG00234748
-Code changes to make sure we do not block downgrade to older packages.(DCSG00356751
-NVMe Init Failure Reporting & Recovery of NVMe Drive with Partial Capacity NSID 1 Namespace.(DCSG00310384
-Additional NameSpace behavior changes.(DCSG00310383
-Vent/Aero: Integrate SPILIB 20.00.14.00.(DCSG00317165
-RDE - Make changes to severity of few RDE alerts and drive resource properties.(DCSG00306601
-SPDM: Add test case in Megamon SPDM Test Framework.(DCSG00380977
-Assert Audit: Remove redundant max thread assertion check.(DCSG00422225
-Implement NVMe shutdown for MR7 programs.(DCSG00109903
-SBLIB: Add backward compatible build environment with new Avenger build.(DCSG00320810
-Fix the target Id reuse issue.(DCSG00342296
-Update JBOD (SYS PD) creation logic to not erase DDF area on the drive.(DCSG00421662
-Add new field DEPOPULATION TIME as part of translation of VPD Page - Block Device Characteristics..(DCSG00167925
-OEM Smart Carrier Backplane code cleanup.(DCSG00171467
-SPILIB2: Integrate 20.00.11.00 with the IT firmware tip.(DCSG00297796
-Add Mrparamspage0 bit(plannedVDRemoval) to control OEM feature.(DCSG00395756
-Assert Audit: Removing an unnecessary null pointer assertion.(DCSG00421724
-Assert Audit: Removing FS Config, Offload Metadata, Flash I/O metadata ASSERT checks.(DCSG00423579
-Enabled cache retention testing for factory testing.(DCSG00342312
-pl: NVMe: update to latest SNTL specification Phase 2.(DCSG00340625
-MR7 : Support WJ Pinning for both WB and WT Parity RAID VDs.(DCSG00214468
-Add dumps to pl dbg.(DCSG00008206
-Change the severity of IML error code 0x1911 from CAUTION to CRITICAL to match with RDE alert "DriveFailed".(DCSG00342319
-MegaRAID FW implementation of parity read cache bypass (PR DCSG00237022).(DCSG00248967
-Support for Boot time password from HII - after controller boot.(DCSG00165392
-Shenandoah RDE - Add support for Redfish Message Event.(DCSG00258873
-PTB Improvements for UEFI start(), stop().(DCSG00266478
-Flash Improvements.(DCSG00409912
-Assert Audit: Removing asserts from the PHY module.(DCSG00433062
-Add an Allow List for symbol_dump.txt in Snapdump -- fw_bld_tools.(DCSG00405512
-Update copyright for oem specific files and clean up code.(DCSG00387800
-Snapdump Improvement - SES Enclosure related.(DCSG00408681
-Assert Audit : Bbu Retention Test.(DCSG00435907
-Fixed coverity defects.(DCSG00350003
-VSES - UBM DFC Array Device Element status read optimizations.(DCSG00347743
-MegaAPI: Add API changes for temporary key escrow (PR: DCSG00428069).(DCSG00935525
-Short term solution for handling SES cable missing to Atlas.(DCSG00293135
-[NVMe] Update SCSI to NVMe translations based on latest SNTL document..(DCSG00235935
-NVMe Sanitize Translation.(DCSG00266054
-Expose PSEC_SHA_HMAC_RESULT using sbliApi.h.(DCSG00342857
-Update the IT/PL Firmware Error codes guide.(DCSG00349980
-MR: Update to latest SNTL specification Phase 1.(DCSG00253373
-MegaAPI: add MR_EVT_PD_OUT_OF_ORDER_DETECTED (PR: DCSG00401621).(DCSG00834870
-Add PLDM compiling support for both Channel and OEM targets.(DCSG00382476
-Enable 24 NVME drive support for internal and external controllers.(DCSG00306646
-MR FW: Update WJ Pinning to use new WJ Pinning XSD value.(DCSG00366410
-SnapDump Enhancement: Move OOB messages out of etty (snapdump) and have under debug flag.(DCSG00299476
-Fixed compilation issue.(DCSG00415061
-Host Trace Buffer Triggers to be persistent.(DCSG00235945
-Add early notification event for possible incomplete writes on parity VD's in case of bad or missing Battery.(DCSG00229751
-SnapDump Enhancement: Capture Nvme identify info in the snapdump..(DCSG00299471
-Print Battery Monitored Information once every week.(DCSG00318550
-CIO deprecated IOtype display while recon Vd - to be removed.(DCSG00301684
-Use NVDATA flag to switch on/off support for Pismo Beach Plus's single port / multipath topology.(DCSG00323867
-MR: Write Journal Pinning debug cleanup.(DCSG00326968
-Assert Audit : Ocm Copy.(DCSG00435908
-Support for Mode 5 NVMe drive firmware download with Chain SGL SCSI Write buffer request..(DCSG00171452
-Address coverity tool reported issues against OEM specific platform MR FW..(DCSG00350023
-Increased firmware image size from 4MB to 5MB.(DCSG00335263
-Code cleanup activity.(DCSG00385894
-Improve SES slot access for the host.(DCSG00703250
-Fix coverity tool reported defects.(DCSG00351970
-Need MR firmware method to mark virtual drive(VD) for transport to new RAID controller so that new controller will respect DDF consistent flag.(DCSG00347297
-Revert back to using original EKMS AENs.(DCSG00326374 (Port Of EnhancementRequest DCSG00342275)
-LKM compliance to Cryptographic Algorithm Requirements v1.5.(DCSG00830702 (Port Of EnhancementRequest DCSG00957810)
-Extending SnapDump Persistence.(DCSG00247000 (Port Of EnhancementRequest DCSG00958045)
-NVMe Sanitize Crypto erase: Disable the "No Deallocate" option.(DCSG00324837 (Port Of EnhancementRequest DCSG00342273)
-VSES: Update diag page 02h status reporting for Array device elements to use UBM DFC SnC Desc Element status code.(DCSG00308393 (Port Of EnhancementRequest DCSG00379789)
-Disk labels need to be tied to fixed physical ports in order.(DCSG00240927 (Port Of EnhancementRequest DCSG00957939)
-Implement delayed VD secured event Modification.(DCSG00253141 (Port Of EnhancementRequest DCSG00259199)
-Do not generate "Bad Phy" event for NVMe drives that fail NVMe Init.(DCSG00543046 (Port Of EnhancementRequest DCSG00966509)
-To support Atlas switch additional FW change were required for HII to enumerate bayID#:Slot#.(DCSG00408798 (Port Of EnhancementRequest DCSG00411520)
-Integrate PLDM platform changes as per new PLDM library for separation of APIs/LIB and source code.(DCSG00415391 (Port Of EnhancementRequest DCSG00528189)
-Disable removal of key caching.(DCSG00378005 (Port Of EnhancementRequest DCSG00404164)
-Examine passthrough code path and block inappropriate commands to LD.(DCSG00358710 (Port Of EnhancementRequest DCSG00903416)
-Q-depth optimization to improve read performance for R10 and other array configurations with spanned arms.(DCSG00914358 (Port Of EnhancementRequest DCSG00959591)
-Remove Retries When INQUIRY for Extended VPD Page 86h Returns 5/24/00.(DCSG00922081 (Port Of EnhancementRequest DCSG00959012)
-FW support for customer GlobeMaster Topology.(DCSG00258112 (Port Of EnhancementRequest DCSG00311654)
-Add an additional hard coded battery pack DPN.(DCSG00408305 (Port Of EnhancementRequest DCSG00414782)
-Boot sequence event udpate.(DCSG00335552 (Port Of EnhancementRequest DCSG00353556)
-SMART Polling Improvement - MR FW Changes to access New Controller Properties Extended structure.(DCSG00248098 (Port Of EnhancementRequest DCSG00258073)
-Disable rescanning of enclosures status page for UBM backplanes.(DCSG00386600 (Port Of EnhancementRequest DCSG00579842)
-Log 0 SPDM events for certificate slot & key management.(DCSG00322202 (Port Of EnhancementRequest DCSG00366811)
-Improve SES slot access for the host.(DCSG00703250 (Port Of EnhancementRequest DCSG00777363)
-NVMe Passthru command support.(DCSG00432879 (Port Of EnhancementRequest DCSG00957826)


Version 52.15.0-4013 - Moderate Impact/Low Probability of Occurrence
-------------------
    BIOS:7.15.00.0
UEFI Driver:0x070F0301
HII: 07.15.04.02
MR FW: 5.150.02-3503
    package 52.15.0-4013
MR 7.15

Defects:
-NVME EPDs, with heavy IOs and TM from host side and NVMe passthru commands in loop from OOB. After 5-8 hrs hit KA.(DCSG00939439)
-BST: ScrutinyCli invoked with invalid options.(DCSG00428615)
-[SATA Only] SCSI Start Stop Unit command with power condition active fails..(DCSG00349970)
-Updated the forceUpdate format in PLDM header generation Tool.(DCSG00106563)
-Starting initialisation while CC is onging is causing Test script to fail.(DCSG00226019)
-Unknown messages are displayed in LSA event logs and also in termlog on drive removal.(DCSG00289940)
-On trying to import more than 240 VDs , foreign import fails with " incomplete foreign config " error message..(DCSG00306596)
-7.15 Static Analysis defect 186076.(DCSG00307838)
-FW : Observing fatal FW error at Line 169 in fw\raid\utils.c on drive removal in a 240 VD configuration.(DCSG00324755)
-PL Fault 0xEA11 observed, while upgrading Atlas FW using StorCLI in presence of bad NVMe PD's present in the Atlas.(DCSG00324838)
-storcli 'start diag': link test skipped if no configured drives present; link test failed if no backend PCIed support.(DCSG00328095)
-SPDMLIB: Reduce number of arguments passed to IT FW debug print functions.(DCSG00335615)
-SPDM: DF: Remove calls to Mbed TLS Self-Test functions.(DCSG00335761)
-MR 7.15 RC1: Ventura H740 Mini Preboot set Preboot Trace Buffer does not change when setting factory defaults.(DCSG00341277)
-Allow OEM Aero controller to be able to disable foreign auto import.(DCSG00353789)
-traceTool.py improvements from assert auditing.(DCSG00358708)
-event ID 458 is truncated as: Write-thro instead of Write-through.(DCSG00382760)
-Fix EPD target Id computation logic based on slot ids.(DCSG00395632)
-Place oem specific event logging introduced after Boot Message under OEM check.(DCSG00397695)
-Add OEM checks for internal OEM specific structures and code.(DCSG00397741)
-Make Clear of the PEPP version of ConfigValid Applicable to IT Boot Code Only.(DCSG00398453)
-StorlibTest faults while creating VDs from OS with OOB activity.(DCSG00415374)
-Add new environment variable to enable/disable SPDM feature code prior to RC, GCA, FINAL build.(DCSG00415494)
-Cache Vault failures on 9560-8i.(DCSG00416955)
-OEM: found double CC events when set scheduling cc cmd via storCLI.(DCSG00432534)
-FW reports unrecoverable Medium Error on Wrong Drive after Rebuild on RAID 1.(DCSG00478465)
-DDF config clear failed messages on Copyback drive in controller logs.(DCSG00500853)
-Aero: HW Workaround - When Aero is in the L1 state it periodically (every 2 ms) transitions to L0 and back to L1.(DCSG00501538)
-SPDM Authentication fails when BMC re-triggers SPDM Handshake.(DCSG00547436)
-Atlas 4.3 : Make couple more test working for VSFW 4.3 CQ BST.(DCSG00758351)
-Rebooting from the OS hangs at a blank screen and does not report the Shutdown AEN.(DCSG00258074)
-9460-16i MR FW marks Zoned Out PHYs as bad PHYs.(DCSG00318971)
-9460-8i faults repeatedly at fw\raid\utils.c.(DCSG00265811)
-PL: 9460-16i incorrect slot numbers assigned attaching to OEM specific mixed mode backplane.(DCSG00243953)
-Controller fault on rebuild and IO.(DCSG00314225)
-FW is overriding the data length , present in the command frame header, with sizeof (MR_LD_ALLOWED_OPS_EXT).(DCSG00322186)
-Bad Phy events are generated for UBM slots with element status = NO_ACCESS_ALLOWED.(DCSG00336611)
-[VSes] Element status set to 'Unknown' in SES page 2 of VSES for some phys where nothing is connected.(DCSG00333163)
-storcli show success for PDCache setting change on VD even though Cache setting of drive was not changed.(DCSG00319375)
-SAS Controller Asserts if SubOEMID that is not in NVDATA is selected.(DCSG00309776)
-extend timeout for OOB command for SATA EPC enabled drive.(DCSG00335204)
-SATA Only: Command timeout observerd on SATA drives.(DCSG00344039)
-OEM: OOB SLT returns error 0x7004 when run SelfCheckingDiagnostic option.(DCSG00352769)
-Assertion failure in fw\raid\fwDownload.c at line 1182 observed, while downloading the Atlas FW in "Atlas Behind Aero" configuration.(DCSG00354677)
-Drives connected behind external card with VSES disabled, failed to detect in Linux OS.(DCSG00350402)
-NVMe drive hotplug discovery of Ugood drives taking longer (1 minute).(DCSG00313017)
-Inadvertent stack printing present at pd insertion.(DCSG00365832)
-MR 7.16A controller continuously dumps unexpected sense 7/20/02 for a Jbod and the drives cannot be erased..(DCSG00363682)
-Fix unnecessarily generated fatal event in status process for unlock PD.(DCSG00378774)
-Parameter changed event is not generated after changing autoconfigure behavior from Off to non-raid disk.(DCSG00370382)
-Duplicate event messages are coming in storage logs while scheduling consistency check.(DCSG00379811)
-FW fault seen during server bootup..(DCSG00345176)
-Virtual drives offline during Ibanez HBA firmware upgrade/downgrade test using storcli.(DCSG00343804)
-Found "C0: Dumping poll data. total length = 3, objtype 0", these message coming to uart firmware log continuously after update.(DCSG00349880)
-Fix Opal function to relock PD.(DCSG00409615)
-Add support back for NVMe opcode 0x4 (write uncorrectable error).(DCSG00427402)
-Make Clear of the PEPP version of ConfigValid Applicable to IT Boot Code Only.(DCSG00398453)
-Updated the forceUpdate format in PLDM header generation Tool.(DCSG00106563)
-For 32i RAID card scrutiny command Ubm show & fru data is not shown..(DCSG00408649)

EnhancementReques:
-BST: Bring up new Aero activity BST server at BLR.(DCSG00323525)
-Single PLDM fw update file that covers all controllers from that series.(DCSG00019356)
-Avenger OOB: PLDM Header Generation Tool.(DCSG00132673)
-Add framework to inject correctable errors to endpoint in Atlas dev bst.(DCSG00306577)
-Establish 4.3 VSSDK BST Framework.(DCSG00321639)
-Atlas DevBST: Add synthetic DPC verification test cases.(DCSG00335033)
-BST - Reset.(DCSG00335443)
-SCONS: Add IOP_SUBSYSTEM_ enums to assembly.(DCSG00341313)
-Support DEVICE_KEY_BASIS flags.(DCSG00342838)
-Add pkeyopt argument and support for checking for zero length input file and fail with appropriate error.(DCSG00348441)
-Enhance Atlas Dev BST core framework.(DCSG00350412)
-Add optional arg '-hash_algorithm' that will accept -sha256 or -sha512 but if that arg is not provided then it will default to -sha512.(DCSG00353453)
-Dev Unit Test : AER on Host Port and Downstream port is exposed.(DCSG00355354)
-OEM COL BST Script.(DCSG00355898)
-Switch Dev BST: Atlas1 WP and SCSI RW Buffer Access.(DCSG00359634)
-update NVDATA for Ruby SED support option default value.(DCSG00360422)
-XSD: Add New field for WJ Pinning for PR DCSG00166915.(DCSG00365836)
-SCONS: Update signing call to utilize new digest argument.(DCSG00365964)
-SPDMLIB: Support SPDM Challenge command request for hash of all supported measurements.(DCSG00366048)
-Update Windows CNG Key Gen and Signing operations to use SHA1 of CA Cert value from new CQ field.(DCSG00369036)
-Update secureSign build process to sign executables with Broadcom windows authenticode signing key.(DCSG00381469)
-Graceful drive removal bit introduced in MR parameters page 0.(DCSG00383587)
-Enable both Opal and Ruby on dual featured Opal and Ruby drives.(DCSG00388238)
-Add -p2 arg to validation signImageX command.(DCSG00395629)
-Implement secureSignLinuxDrv CLI tool for HSM managed keys with support for certTypes PKCS7|X509 using NFKM engine.(DCSG00396377)
-Added new AUTO BST script to verify configuration loss related issues..(DCSG00411899)
-Atlas1: Changes to enable 4.3 TS Dev BST.(DCSG00414058)
-Added framework for MPT and implemented disable MPT BST.(DCSG00422353)
-Implemented BST to disable MPT and reboot host.(DCSG00422358)
-XSD Atomic LKM-to-EKM transition.(DCSG00426515)
-MR7.15 SPDM: Allow Set DCMD commands on In-Band PCIe if authentication is not complete.(DCSG00459846)
-MR7.15 SPDM: Disallow the user from configuring SPDM certificate in slots 1-7.(DCSG00500438)
-Atlas1 - Disable USD test for 4.3 TS RDK BST.(DCSG00545986)
-Update customerSign.exe to support -productName argument and separate logic for Ventura / Aero.(DCSG00548432)
-Update secureSign.exe with signImageX that supports RSA4096 customer publickeys.(DCSG00567155)
-Implement conditional logic using the 'product' field in the PublicKey record to conditionally add the Root CA cert to the DER.(DCSG00775526)
-Adding critical events to a bad SAS/SATA drive that is consistently failing TM Reset.(DCSG00298872)
-Update JBOD (SYS PD) creation logic to not erase DDF area on the drive.(DCSG00421662)
-False RMC timeout showing up in MR log.(DCSG00307806)
-Single PLDM fw update file that covers all controllers from that series.(DCSG00019356)


Version 52.15.0-3831 - Moderate Impact/Low Probability of Occurrence
-------------------
    BIOS: 7.15.00.0
UEFI Driver:0x070F0301
HII: 07.15.04.02
MR FW: 5.150.02-3429
    package 52.15.0-3831
MR 7.15

Defects:
 -(DCSG00039823)
 -SPDMLIB: Add change to SConstruct to copy library output file (*.a) to release folder(DCSG00117832)
 -Handling a newly added Cache loss Boot Message for IML(DCSG00041692)
 -The test tool does not reflect correct bad block count when additional bad blocks are added(DCSG00139682)
 -SPDM_LIB: Add alignment parameter into SPDMLib_Calloc interface(DCSG00237674)
 -Merge conflict issues(DCSG00234911)
 -NVMe Init reports wrong failure error codes(DCSG00103993)
 -Aero_DBU_7.14_PA2: VMWARE Beta OS reported Assert during data under run.(DCSG00096622)
 -Add new environment variable to enable/disable SPDM feature code prior to RC, GCA, FINAL build(DCSG00415494)
 -Coverity Bugs in PL Enclosure Management Files(DCSG00043514)
 -Additional Key Data field of Security Page 1 is missed in XSD definition(DCSG00077979)
 -Firmware hits exception on power cycling the server with NVMe drives connected(DCSG00109752)
 -Fix unintended update of BBM Long size.(DCSG00148922)
 -MBEDTLS LIB: fix compilation error during IT FW build(DCSG00234920)
 -(DCSG00218427)
 -Adjust the UART messages during Snapdump(DCSG00086774)
 -Allow OEM Aero controller to be able to disable foreign auto import(DCSG00353789
 -Aero Host Application Loading Changes to Support CTRL-R(DCSG00152618)
 -duplicate entries of arrays when creating hot spare drive caused storCLI to display incorrect information(DCSG00234562)
 -SSD Estimated Life Remaining in Days shown appropriately for nvme drive(DCSG00216327)
 -SPDM: Attestation failed with wrong Nonce values(DCSG00126872)
 -Made platform changes for PLDM fw update operation(DCSG00049608)
 -Fix file names related to PTB(DCSG00081243)
 -216-x controllers do not have ONFI support, optimized the code.(DCSG00217262)
 -Fix static code analysis defect 127860(DCSG00241065)
 -Adding SPDM filter in client code.(DCSG00062370)
 -VenturaMR 7.14Alpha: -24% drop and 55% gains seen in SDR0, R0 for SW, RW for IO Size-4K-1M, QDs-4,16,64,256 - 64D-12G SAS HDD Expander connect - Linux OS(DCSG00150877)
 -7.14 SPDM client code fix: Enable Route By ID for all the packet.(DCSG00150120)
 -Change file name of SpdmDebug.h to SpdmDebugs.h . And Check in SpdmDebugs.h for IT(DCSG00074556)
 -UNMAP support is blocked and disabled(DCSG00253426)
 -Aero MR715PA - Aero + Atlas FW download blocks IO causing driver KA and OCR(DCSG00233642)
 -Aero_DBU_714: On Cavium (ThunderX2(R) CPU CN9975 v2.1 @ 2.20GHz) ARM server with Ubuntu OS, Aero discovery fails with megasas_init_fw(DCSG00111965)
 -SPDM 7:15 Set tagOwner as per SPDM request.(DCSG00240237)
 -NVRAM changes for supporting dynamic recon ghost tgtId(DCSG00216908)
 -CTRLH- Incomplete Display of messages(DCSG00301793)
 -SCSI Passthrough format command on unconfigured good drive causes kill adpater(DCSG00150798)
 -Fix assert in etty debug code(DCSG00152802)
 -VD creation with default WB policy to be blocked in P216i Controllers(DCSG00054336)
 -Correct Sblib Int make sure ER 110403 and ER 166877 are present (2)(DCSG00215388)
 -Fix EPD target Id computation logic based on slot ids(DCSG00395632)
 -MBEDTLS LIB: Fix dynamic memory release bug in Mbed Tls Library(DCSG00216944)
 -Mismatch between subsystem id in NVDATA and SBR for 9405-W 16i(DCSG00077700)
 -MR 7.14 : Storcli allows to set maxspinupdrive count to 255.(DCSG00076934)
 -Release Automation: Exceptions during execution of release script(DCSG00151389)
 -Aero A0: External cards do not support more than one PCIe drives.(DCSG00249770)
 -[SPDM] SPDM lib changed one of header file name , seeing compilation error in IT.(DCSG00077919)
 -RDE: Fix operation for volume and link error threshold for port(DCSG00097465)
 -PCIe Switch Page 250 has NumPorts set to zero, and this page is not included in "iop show cfg all"(DCSG00101756)
 -7.15 Static Analysis defect 186076(DCSG00307838)
 -Implicitly error when converting an expression to a narrower type(DCSG00225977)
 -MR7.15 Alpha: Kill Adapter occurs during flashing enclosure firmware and heavy IOs(DCSG00299407)
 -MBEDTLS Lib: Alignment issues while certificate verification on IT cards(DCSG00312818)
 -Fix static code analysis defect 45959 45944(DCSG00253256)
 -MR7.15: SPDM: Dev DF: Call revised SBLIB API to retrieve Secure ID(DCSG00310427)
 -No Bad Phy reported after inserting a simulated Bad drive(DCSG00051251)
 -Fix for incorrect bay count value.(DCSG00071758)
 -WG: LSA does not allow to change to any other behavior once encountering error during behavior change(DCSG00243910)
 -SPDM_LIB: Set tagOwner as per SPDM request.(DCSG00239464)
 -Remove stale parameters from NVDATA(DCSG00136341)
 -PL: Adjust the MPI Device support check to only support Atlas's MPI Device(DCSG00040939)
 -pl: NVMe: 265D fault in out of resource case(DCSG00093410)
 -MR_7.14 Alpha DBU: Ventura iMR FW received a command "getCdbPtrAndTargetId: Invalid cmd fa", it result to KA on VMWARE OS.(DCSG00151683)
 -MR_7.15: PTB switch to Enabled and Save. No PoP up message reboot required/PTB.txt not part of Snapdump.(DCSG00241021)
 -Phase 15 Coverity Bug Fixes(DCSG00105045)
 -Duplicate MPI Toolbox Tool Values in MPI temp(DCSG00086898)
 -Unknown messages are displayed in LSA event logs and also in termlog on drive removal(DCSG00289940)
 -FW creates R0 VD when HII: Enable/Disable Host LED Management For JBOD setting is toggled(DCSG00095243)
 -FW hits assert when NVMe drive returns non-success reply for admin commands(DCSG00080405)
 -7.15 Aero MR: Add alignment parameter into SPDMLib_Calloc interface(DCSG00237675)
 -Running format on a EPD once one has started is causing a KA.(DCSG00167682)
 -MR7.15 PA2: drive and enclosure connector are reported differently in Ctrl-R for OEM controller(DCSG00241278)
 -MR 7.15: Invalid Arguments error seen while setting config file w.r.t JBODs from Storcli.(DCSG00221279)
 -PL: Reply to IO's bad SGL to Atlas SES has wrong DevH and SMID's incorrectly tries to fit 3 SGEs inframe(DCSG00315476)
 -iMR boot stuck in creating slot mapping(DCSG00214223)
 -MR7.15: Flashing Atlas RDK firmware via storcli caused MR firmware crash(DCSG00297302)
 -storcli 'start diag': link test skipped if no configured drives present; link test failed if no backend PCIed support(DCSG00328095)
 -Aero MR715PA - Aero + Atlas switch write buffer command fails occasionally(DCSG00241202)
 -RDE - REST client displays ReadCachePolicy as OFF for Read Ahead enabled volumes(DCSG00243670)
 -SBLIB: Getting Inconsistent secure ID on IT cards(DCSG00309847)
 -MR7.14 Beta: BMC-OOB-Update Controller Firmware SLT reports "Flash download already in progress"(DCSG00088074)
 -storcli 'start diag' command failed if ran after storcli 'show all' command.(DCSG00231398)
 -7.15 Static Analysis defect(DCSG00307840)
 -PTB bad address handling(DCSG00077833)
 -Fix for Data Abort Exception caused due to access of invalid device id in event structure(DCSG00043231)
 -MR 7.15 RC1: Dell Ventura H740 Mini Preboot set Preboot Trace Buffer does not change when setting factory defaults(DCSG00341277)
 -Coverity Defects(DCSG00094727)
 -PH15 Scrutiny CLI: device c command output is not giving the details of the all the devices connected to the expander(DCSG00102332)
 -The first 32 characters of MPI defines should be unique(DCSG00086266)
 -Fix static code analysis defect 127845(DCSG00241066)
 -MR_7.14 PA2 DBU: FW received the KA, while running IO with IOCTL command in a loop(DCSG00117767)
 -Fix Static Code analysis issue 101556 101555 101554(DCSG00084027)
 -pl: backend PCIe: prevent switch rediscovery quirks(DCSG00018730)
 -MR-7.13: FW - STP passthrough -FW sending ack before completely receiving all MCTP packets.(DCSG00078243)
 -MR_7.14_DBU: FW & Storcli reported enclosure id's are mismatch for a NVM-E drive which has failed in nvmeinit(DCSG00099024)
 -MR7.15 PA2: driver health message displayed 1 more time after device order by firmware is disabled on Windows system(DCSG00231084)
 -SPDM : BMC Emulator System is halting at POST with latest FW pkg 2.14.0-3226 with Zumabeach controller.(DCSG00111753)
 -MR 7.15_IO tool detecting data integrity issue on 8i8e controller with NVME and SAS connected to different enclosure/Expander(DCSG00231642)
 -Firmware fails to send Enclosure removal event to host when the enclosure is removed from the topology.(DCSG00232962)
 -[Aero] Application scanning for I2C devices on I2C bus hang when OOB configured to MCTP-PCIe mode(DCSG00103208)
 -NVMe Init error drives are not discovered after pull/push within DMD timeout(DCSG00242197)
 -FW : OCR fails to start from OOB Storelib test, and controller fails to discover in OOB SLT after this failure(DCSG00245029)
 -Sea 16e PCIe TX Compliance Test Failure(DCSG00052179)
 -MR7.15 PA1: excessive "In OOBExecCmdIssue and dmcd is 0x#######" prints seen on termlog(DCSG00152105)
 -Duplicate slot IDs assigned for SAS/SATA drives on elrond Ex1 backplane when it is connected to 9405W 16i controller.(DCSG00072826)
 -Crucial assert print is missing from Snapdump(DCSG00139459)
 -Ventura/Mercator: pl: 4311 fault following SAS IO Unit Page 1 write(DCSG00099275)
 -PL Backend PCIe: 0xEE1A fault observed with bad clocked Aero and Atlas(DCSG00080298)
 -Firmware Fault on iMR while running IOs on 4K sector drives(DCSG00108060)
 -BSOD observed with mode 7 Parallel PD firmware update in PCIe OOB(DCSG00315988)
 -Controller fault observed on changing some phys to manual port config with port set to 0.(DCSG00237498)
 -Ventura: SAS3616W or SAS3616W based boards have links less than epected width(DCSG00249594)
 -SPDM_FW : Import certificate should fail for the slots for which already certificates are imported and sealed(DCSG00119529)
 -Place oem specific event logging introduced after Boot Message under OEM check(DCSG00397695)
 -MR 7.15 Alpha: securesed property can be set but not shown under show personality cmd for NONE mode(DCSG00257803)
 -Elrond Ex2 w/ SAS/SATA incorrect slot numbers after PD move to different slot(DCSG00069084
 -7.15 Aero: Call SPDMLibInit only if SPDM is enabled.(DCSG00231374)
 -Correct Sblib Int make sure ER 110403 and ER 166877 are present(DCSG00214265)
 -Fix static code analysis defect 127882(DCSG00253339)
 -pl: backend PCIe: resource leakage during direct attached event generation(DCSG00093660)
 -FW : Observing fatal FW error at Line 169 in fw\raid\utils.c on drive removal in a 240 VD configuration.(DCSG00324755)
 -Use slot group number to get certificate algorithm record of security manufacturing page(DCSG00232583)
 -Fix for the value of a controller status bit: Support PD firmware download(DCSG00109367)
 -Fix Spdm Client logic(DCSG00053777)
 -Controller Delete DPMStat Type=all does not reset QD.(DCSG00096734)
 -RDE - Storage Controller cache health status should display "Warning" if WB cache enabled Volumes present but energy pack is failed, missing or charging(DCSG00115184)
 -7.14 PA2 (DBU) LSA WG: No option to change the behavior mode for the Ventura controller.(DCSG00109936)
 -MR7.14: Controller Bios never sent the printing-has-completed DCMD(DCSG00212592)
 -Snapdumps are discarded unnecessarily when flashing a new ROP(DCSG00118659)
 -Make it easy to query PTB wrap(DCSG00079652)
 -SBLIB: Significantly longer boot times that previously encountered in MR CBB(DCSG00299427)
 -UBM3_x4-Solid Green LED turned on on JBOD drives after few drive pus pulls(DCSG00085866)
 -Add PCE register dumps to snapdump(DCSG00218199)
 -pl: port enable is delayed when SAS/SATA devices are attached to a UBM backplane(DCSG00076783
 -Performance regression in various workloads due to code arrangement (4K SW QD=64 RAD6 1W for 24 SAS SSD and SR profile for small IO size in all QDs in 12G SAS HDD)(DCSG00073978)
 -System POST not proceeding and keeps on loading EFI SAS driver(DCSG00287132)
 -RDE -"Volumes@odata.count" is coming up as 0 for a Dedicated Spare drive which is part of a Volume(DCSG00112594)
 -Add a build option for Coverity MISRA_CAST to disable CWE-681(DCSG00079268)
 -Out of bound memory access when assigning dma group for controller devices.(DCSG00243152)
 -Manage PCIe Interface page should be greyed out for UBM if the user is not allowed to make any Link Width changes(DCSG00251554)
 -Aero MR7.15 PA - Aero+Atlas Eval Invalid enclosure and slot info from nvmeiniterrorlist(DCSG00151747)
 -Junk character is display in OEM serial number(DCSG00084472)
 -Phase 15 Coverity Bug Fixes(DCSG00092935)
 -Connector Name displayed as 'Unknown' in HII for NVMe drives behind Switch(DCSG00085845)
 -0x6001 Fault while running IOs and cable pull test(DCSG00040422)
 -Evaluate the MFI stats returned with the updated recon behavior(DCSG00227245)
 -Fix the decision in zcdump for which context to run in(DCSG00225050)
 -IOP: Trace buffer image has extra "CFG string(DCSG00051124)
 -Backplane expose on/off setting is failing(DCSG00075666)
 -(SATA Only) SCSI ATA Passthrough command with set feature command to set the drive in standby_y state sets it to standby_z state.(DCSG00080256)
 -MR 7.14 : Unable to set controller properties with latest aero firmware pkg using storcli(DCSG00094728)
 -MR 7.15: SPDM: Select correct Hash Algo for CSR (Certificate Signing Request) & close CSR session for error case(DCSG00304511)
 -9580-16i controller with PCIe switch doesnt see fault LED on offline PD(DCSG00224982)
 -Check in SpdmDebug.h for IT(DCSG00074108)
 -Updated CoreDump specific functions to run from OCM memory and enabled XMEMXOPY(DCSG00093703)
 -pl: NVMe: E429 fault on register read failure(DCSG00098345)
 -SBLIB: Change bool type to int type in API parameter to maintain compatibility(DCSG00100308)
 -SPDM: Don't fail APP request for import certificate in slot 2-7 with sealed flag set(DCSG00108408)
 -Enable SSD Wear Gauge for NVME drives(DCSG00042403)
 -SPDM library to remove %s for any print as IT does not support %s print string.(DCSG00061353)
 -JBOD deletion event id 139 has slot id 255(DCSG00299050)
 -Import certificate command with out seal option is failing for slots 0 & 1.(DCSG00228127)
 -[Aero/Ventura] MCTP discovery fails after unload and load of MCTP driver in BMC(Board Management controller)(DCSG00058897)
 -ventura build issue with PL PCI DEVICE feature disabled(DCSG00286358)
 -OEM board: SAS drives the link speed is shown as unknown(DCSG00110319)
 -RDE : Query for drive information which was part of volume where full initialization was running results in unexpected error in REST client(DCSG00112022)
 -Total Device count mismatch(DCSG00048491)
 -SPDM: Dev DF to check in a new environment variable to control disable/enable hard-coded key pair(DCSG00324022)
 -Fix iMR save code in create small dumps(DCSG00113527)
 -A8: Aero MR 7.14: Intermittent issue: Assertion failure in fw\raid\taskman.c at line 361 , when tried to start IO's on SAS SSD 24 expander connect RAID5 RW Windows 2019(DCSG00139362)
 -MR 7.14 Beta: Assertion failure in fw\raid\mpthostcmd.c at line 3213: crd->mptReqDesc.Default.SMID(DCSG00215378)
 -Update log function to match API changes for event structure(DCSG00098168)
 -MR7.15 PA2: JBOD is missing after downgrading to 7.14 FW and upgrading again(DCSG00230227)
 -MR7.15 PA1: Downgrading to 7.14 FW when device order by firmware is enabled causes controller to be not accessible in OS(DCSG00221705)
 -Expander FW fail to flash FW sometimes in offline mode(DCSG00217264)
 -Starting initialisation while CC is onging is causing Test script to fail(DCSG00226019)
 -Return MFI_STAT_NO_HW_PRESENT for some bbu DCMDs for 216 controllers(DCSG00081956)
 -Make Clear of the PEPP version of ConfigValid Applicable to IT Boot Code Only(DCSG00398453)
 -The "Last Erase Block' reported in the debug data is incorrect.(DCSG00170637)
 -Fix static analysis issues(DCSG00087285)
 -Pre-boot crash snap dump is not fully captured(DCSG00297597)
 -PL: MS-SES with no Array Devices in Atlas SES causes 0x7200 fault(DCSG00077263)
 -Fix SPDM routines name which are using same name as PLDM routines(DCSG00079768)
 -Unitialized pointer was being accessed(DCSG00096545)
 -MR_7.15: User disabled PTB not reflected, hence PTB.txt is part of OnDemand SnapDump(DCSG00238510)
 -SPDM LIB: Set ECDSA signature with correct size in Signature field of SPDM Challenge response buffer before sending to BMC server(DCSG00225192)
 -Disabling MR_CTRL_INFO.ldOperations.writePolicy bit in JBOD mode for specific OEM(DCSG00069218)
 -MR 7.15 Alpha - Large IO Support is allowed to be changed, but can't be set(DCSG00304321)
 -Parallel PD Firmware hang once interrupted and restarted from SLT in OOB PCIe mode(DCSG00108848)
 -SPDM_FW : SPDM commands are failing in OOB SL/SLT on Trinity M6 servers.(DCSG00126744)
 -PD FW Download support bit is repurposed to FW Download in progress(DCSG00138303)
 -Aero MR FW: While reconstruction process is running in the background, Firmware is allowing to change the behaviour mode from NONE to R0 with error message.(DCSG00108800)
 -Drive count not correct in CLI for UBM3 x4 backplane with SAS drives connected(DCSG00081735)
 -PL: Aero -- Atlas US Cable Pull/Push Results in Missing Enclosure Slot Info(DCSG00181448)
 -crypto erase not completing on SATA drives(DCSG00256740)
 -PL Fault 0xEA11 observed, while upgrading Atlas FW using StorCLI in presence of bad NVMe PD's present in the Atlas.(DCSG00324838)
 -Coverity found defect in MPI Device and FPE modules.(DCSG00098787)
 -MR 7.15 PA2: Extra prints not seen before that appear to be debug: setup_cache_headers(DCSG00228849)
 -MR7.14 Beta: Firmware hit exception stuck while IOs and rebooting, causing no controller found(DCSG00215476)
 -Fix mistaken warning of drive degradation detection messages(DCSG00212751)
 -Firmware faults when reconstruction is going on with cable pulls(DCSG00134460)
 -Make PLDM platform code compiling without OOB_COMMON(DCSG00219528)
 -NVME Drives not getting discovered on inserting in Customer UBM3 x4 backplanes until OCR.(DCSG00081732)
 -Cache Vault failures on 9560-8i(DCSG00416955)
 -Aero MR 7.14 PA2: Win/Lin Gen4 NVME: -15% drop seen in OLTP profile for IO Size-256K from QD-64 to QD256 in R0-1WRK(DCSG00137117)
 -Avoid data exception when collecting early preboot snapdump(DCSG00081566)
 -Observed Data Corruption during IO stress test.(DCSG00212797)
 -Bug Fix for SPDM modules(DCSG00103063)
 -OOB : Controller is not discovering thru OOB Storelibtest in pcie mode on loading /unloading SLT multiple times.(DCSG00166684)
 -Aero A0: Fault D033 running IO + Expander Phy Link/Hard Resets to Expander phys(DCSG00045450)
 -Energy pack moves to failed state post controller reset(DCSG00046787)
 -Addressing IT raise defects in SPDM library change.(DCSG00061718)
 -Fix offset comments in DM IO Context(DCSG00226222)
 -Large topology of more than 500 drives cannot be supported on SAS 3.5 Channel Controllers(DCSG00108246)
 -Phase 15 Coverity Bug Fixes(DCSG00104982)
 -SPDM DCMD bug fix 03/04/20(DCSG00103877)
 -On trying to import more than 240 VDs , foreign import fails with " incomplete foreign config " error message.(DCSG00306596)
 -IT SPDM commands not working via host interface(DCSG00134673)
 -traceTool.py improvements from assert auditing(DCSG00358708)
 -MBEDTLS LIB: Add change to SConstruct to copy library output file (*.a) to release folder(DCSG00117834)
 -MR7.15 Alpha: JBOD drive still show and list as first in order device before VD even after system reboot (Jbob personality mode)(DCSG00304336)
 -Coverity Defects in SATA and VPP code.(DCSG00234415)
 -MFG Page 49/50/51 defines are not compiled(DCSG00083748)
 -MR7.15 Alpha (DBU) WG: LSA allows user to assign drive in prepare for removal state as replacement for missing drive for a DG(DCSG00255186)
 -Add OEM checks for internal OEM specific structures and code(DCSG00397741)
 -Aero: PswSbr.bin file is read only and causes an error when running the RMC script(DCSG00082963)
 -[Aero] SATA drive gets dropped when corresponding phy is disabled and enabled.(DCSG00222544)
 -PL: SMP Timeouts During Expander Phy Reset Test(DCSG00043616)
 -Fix static code analysis defect 127973(DCSG00241062)
 -RDE - REST client displays drive state as "Disabled" when initialization is running on the Volume configured on that drive(DCSG00223283)
 -[9440-8i+MR7.12/7.13/7.14Beta2+ARM] controller FW printed Assertion failure in fw\cpu\arm\exceptions.c at line 1006: 0 during fio issue verify(2F) commands to sas hdd(JBOD)(DCSG00236990)
 -(MS SES) Non data transfer SCSI IO failed with Invalid SGL error(DCSG00234926)
 -iMR FW may crash if disabled in device manager when Microsoft OS boots and lock up(DCSG00040869)
 -MR-7.13: FW - STP passthrough response Firmware does not send some ending bytes.(DCSG00078207)
 -The last known successful learn time is reported as in Nov 11, 2000(DCSG00107714)
 -RDE - Make Redfish Tool compatible with python 2(DCSG00166025)
 -Fix Bus Master Enable handling in Snapdump related to DCSG00040869(DCSG00112203)
 -NVMe device not discovered after disable-enable PCIe link in PCIe IO Unit page 1(DCSG00082524
 -In JBOD personality SES management bit is not set in auto configure supported bits for NONE Mode(DCSG00278401)
 -MR 7.14 Beta: OCR did not complete appropriately and assert didn't print properly(DCSG00212038)
 -Fix stack printing in "ef" command(DCSG00171225)
 -Fix print nesting for ASCII eTTY(DCSG00134926)
 -Controller fault 0x1902 is seen while issuing locate command to NVMe drives(DCSG00062252)
 -MR7.15: FW hit Assertion failure in fw\raid\fwDownload.c at line 1159: fwDownload.pdRestrictCount!= 0 while flashing encl & PD firmware correspondingly(DCSG00283749)
 -Fixing Coverity issues(DCSG00096489)
 -512B drive is assigned as DHSP for 4K DG(DCSG00079486)
 -Aero MR7.15 Alpha - PR stalls, never completes on NVMe PDs(DCSG00267705)
 -Timestamp is not getting established in Atlas FW, when Atlas is connected behind Aero Controller(DCSG00268587)
 -"Add enclosure event for an enclosure that is already active" error message observed in Windows event logs(DCSG00063929)
 -Aero Pre-man string failure during looped testing(DCSG00084540)
 -GetSchemaDictionary command executed from RedACT is failing for annotation schema(DCSG00078890)
 -Disable R0 Autoconfig option from FW(DCSG00109751)
 -iop show cfgspace doesn't work(DCSG00066110)
 -SPDM LIB: Need to include header file SpdmLibTypes.h in SpdmLibIFace.h(DCSG00074328)
 -MR7.15 Dev: reduce dmSpinCheckAndRetryCmd etprints.(DCSG00228143)
 -MR 7.14 Alpha: Unexpected OCR caught by automation, FW update issue(DCSG00138244)
 -OEM Server: Foreign Secure Drive - Clear drive option is Enabled.(DCSG00282684)
 -Fix MR MPB2 copied length.(DCSG00099487)
 -MR 7.14 PA2 - Aero firmware asserted at taskman.c at line 361 during R5 SED creation(DCSG00111382)
 -MR 7.15 Alpha: PR estimated time left is wrong in multiple places(DCSG00297903)
 -Bug Fix In get CERT and While reading the certificate from the client(DCSG00047643)
 -ED91 Fault while running IOs + OCR (controller reset) testing(DCSG00057254)
 -print correct variable during error condition(DCSG00096538)
 -RDE - "EncryptionAbility" field for SED drives displays blank(DCSG00237493)
 -Controller DPM type= hist does not save Response time properly which shows some conflicts.(DCSG00086932)
 -For Vses device box info is populated.(DCSG00045198)
 -Applications displays incorrect PD count with SATA drive in enclosure on multi-path configuration(DCSG00151556
 -Fix PD initialization abort issue on non secure erase SATA SSD(DCSG00137138)
 -Asserts from interrupt handlers are not working properly(DCSG00127828)
 -Use NVRAM to save PTB information(DCSG00079654)
 -Remove MR's EXT_MFG_49 define. This change should be pick up from DCSG00228036 Pre-Alpha Release: CtrlFw_Ph_16.0 - 15.250.05.00 MR PL-SCS Libs(DCSG00229397)
 -Fix for misalignment of an internal structure(DCSG00050922)
 -MR 7.14 PA2 DBU : SLT_OOB : Get enclosure element data throws 8017 error code for UBM backplane.(DCSG00121827)
 -Controller DPM overflows Write Count after 32 bits. As per document, it is supposed to be 64-bit number.(DCSG00103860)
 -Coverity defect fix(DCSG00231928)
 -Fix static code analysis defect 128532(DCSG00241025)
 -SPDM 7.15: Dev DF - return appropriate error to SPDM Lib when read certificate from security page 0 fails(DCSG00298150)
 -Avoid controller firmware freeze due to one particular vendor's SATA TCGe drive behavior(DCSG00102153)
 -MR_7.14 Alpha DBU: VMWARE reported IOMMU fault detected for vmhba3(Ventura IMR).(DCSG00149010)
 -MR7.14 iMR snapdump start from ID 1 where MR start snapdump ID 0-- not consistent(DCSG00108698)
 -RDE - Drive schema shows operations as "Erasing" and percentage "0" after initiating LD erase/initialization operation(DCSG00134506)
 -Fix static analysis defect(DCSG00226155)
 -event ID 458 is truncated as: Write-thro instead of Write-through(DCSG00382760)
 -MR7.15 PA: FW gets hung while generating snapdump through MegaMon call SnapDumpDbgGlobalOnly(DCSG00220882
 -MR 7.14: Storcli: "Support NVMe Repair" is shown as "yes" in profile 10 and incorrect raid support displayed in profile 11 on iMR ventura(DCSG00099915)
 -SPDM_FW : Delete/Import foreign configs should not be allowed until SPDM Authentication happens between BMC and controller.(DCSG00237704)
 -Coverity found defect in SATA and Enclosure management modules.(DCSG00098596)
 -RDE - REST Client displays truncated drive size for NVMe drives(DCSG00148309)
 -Make Challenge Buffer Include Get_Digest/Digest, Get_Cert/Cert(DCSG00055393)
 -Controller DPM (Drive Performance) returns some unacceptable numbers.(DCSG00080749)
 -Failed NVMe drive repair start command does not get report back properly(DCSG00134906)
 -controller DPM type=Ext returns wrong number of sectors.(DCSG00088148)
 -SPDM 7.15: return actual size of certificate chain content to SPDM LIB(DCSG00226169)
 -Disable CoreDump when Flash device is not present(DCSG00054500)
 -Correct tagowner for Spdm Client MCTP code(DCSG00061087)
 -Adapter got killed when trying to update Atlas FW using storcli with IO(DCSG00231406)
 -Build failed after MbedTLS new base line pulled(DCSG00074952)
 -RDE - Firmware crash observed after querying LD information from REST client on AROC controller(DCSG00151330)
 -Observed PL Fault 0xEE17 when NVME drives connected via PCIe switch.(DCSG00108281)
 -SPDM: DF: Remove calls to Mbed TLS Self-Test functions(DCSG00335761)
 -Shenandoah RDE: Fix PCIe interface details(DCSG00080093)
 -Fix incremental Coverity builds(DCSG00254162)
 -[MBEDTLS] Device Key Pair Generation resulting in different Keys on IT card(DCSG00318909)
 -RDE - "StripSizeBytes" shows double the actual strip size value for the volume resource in REST client(DCSG00136280)
 -MR7.14 PA2 - Unable to collect zcdump once hitting PL Fault. FW keeps looping back to PL Fault again.(DCSG00109086)
 -Some of SAS/SATA drives attached to OEM Aero HBA may not be reported to host(DCSG00076717)
 -pl: firmware hang occurs in UBM command error case(DCSG00072841)
 -Coverity defect fix in FPE code.(DCSG00235474)
 -Atlas 4.2: Prints "C0:EnclSesPdAccessAllowed: SES not ready (opState:10000) pd:0" observed in Aero FW logs, after upgrading/downgrading the Atlas RDK FW which is connected behind Aero controller(DCSG00254663)
 -Resetting the event counters in Ext. SAS/PCIe IO Unit Page 250 fails(DCSG00150901)
 -Fix SPDM library for Get_Digest, Challenge.(DCSG00053409)
 -RDE - Virtual drive 'PercentageComplete' shows 100 in REST client for volume resource when erase operation is running(DCSG00113953)
 -[SPDM] Fix compilation #include "iopPlatSecCertMgMt.h" case sensitive issue(DCSG00109315)
 -SPDMLIB: Reduce number of arguments passed to IT FW debug print functions(DCSG00335615)
 -SPDM: Fix issues in Certificate Slot Mgmt DCMD(DCSG00103123)
 -Fix and Rename Common NVMe Header File(DCSG00025545)
 -Release Automation: Web page button not detected in script.(DCSG00137712)
 -Fix static code analysis defect(DCSG00241024_
 -pl: NVMe: D062 fault during NVMe init(DCSG00083594)
 -MR7.15 PA1: VDs missing after upgrade/downgrade between MR7.14 FW and MR7.15 FW(DCSG00216224)
 -Aero 7.15 MR: Add memory allocation/free for SPDM_LIB(DCSG00226196)
 -MR7.15 PA1: Enclosure disappears after back to back ESM FW update with IOs(DCSG00171108)
 -Correct Nvme Double Buffer module for multiple double buffer cases.(DCSG00120410)
 -RDE - REST client displays error when tried to get drive resource details on a AROC controller(DCSG00125938)
 -PL: Removal of NVMe Drive that Failed NVMe Init Doesn't Work Correctly(DCSG00103998)
 -PBP hotplug drives showing dual sas address, instead of single sas address(DCSG00096702)
 -FW changes to support removal of "Bays on port" field in APPs(DCSG00082494)
 -MR_7.15: Driver load/unload result to Assertion failure in fw\hw\debug\ptb.c at line 618: 0 on Aero card(DCSG00238473)
 -Aero Seeing "SpdmReadCertForSlot[277]:[Error] Certificate Read Failed" on IT card after Controller Resets(DCSG00253315)
 -Aero SPDM Policy: Add Nvram flag to enable/disable SPDM feature in megamon(DCSG00112274)
 -4K VD is set to boot device after foreign config import(DCSG00099273)
 -PL: Initial MPI driver error injection can cause the Managed Switch's SES to not be exposed to OS(DCSG00045593 (Port Of Defect DCSG00045725)
 -SMART trip drive LED not blinking for specific OEM controllers(DCSG00084535 (Port Of Defect DCSG00093720)
 -"iop show cfg all" command captured by core-dump is zero(DCSG00047928 (Port Of Defect DCSG00050673)
 -pl: backend PCIe: switch rediscovery fails with certain switch configurations(DCSG00061635 (Port Of Defect DCSG00062706)
 -PL NVMe : NVMe repair operation fails with metadata(DCSG00112303 (Port Of Defect DCSG00121425)
 -As part of the Device Add\Removal Event, the enclosure handle passed on by the PL FW to the upper layer is incorrect.(DCSG00298128 (Port Of Defect DCSG00303518)
 -Auto Configure EPD-PT set fails when sent with MR_AUTO_CFG_PARAMETER received from firmware for Auto configure Off mode(DCSG00215315 (Port Of Defect DCSG00225974)
 -Unable to secure EPD in EKM mode after reporvisioning(DCSG00074490 (Port Of Defect DCSG00082148)
 -VSES SES Page 02h reports Unknown (06h) Element Status for some Array device elements in a wide DFC slot(DCSG00069091 (Port Of Defect DCSG00086818)
 -Autoconfigure R0 is allowed to be set when this should be disabled and only allow the immediate command.(DCSG00078527 (Port Of Defect DCSG00082103)
 -Foreign configuration import fails after rekey operation.(DCSG00104797 (Port Of Defect DCSG00218454)
 -JBOD drive is converted to Configured Drive after OCR / Reboot(DCSG00293760 (Port Of Defect DCSG00312022)
 -UBM: Incorrect slot number enumerated for a DFC on 3 x4 DFCs UBM config(DCSG00048027 (Port Of Defect DCSG00048742)
 -Auto Configure R0 option is showing in eHBA mode(DCSG00235390 (Port Of Defect DCSG00237305)
 -Dev-Defect: Incorrect default autoconfig parameters are returned for non zero confmode(DCSG00111423 (Port Of Defect DCSG00117784)
 -MR7.15 PA: FW gets hung while generating snapdump through MegaMon call SnapDumpDbgGlobalOnly(DCSG00220882 (Port Of Defect DCSG00235639)
 -In JBOD profile, set VD Write Cache to AWB shows success even though WB Supported is set to NO(DCSG00113956 (Port Of Defect DCSG00240942)
 -Dev-defect Use of OEM check in a function not correct.(DCSG00119796 (Port Of Defect DCSG00122767)
 -PL NVMe : PCI task management is not getting completed.(DCSG00231422 (Port Of Defect DCSG00245538)
 -StorCLI shows "PR excluded VDs" where actually PR is running on online PDs of VD.(DCSG00126725 (Port Of Defect DCSG00240684)
 -pl: NVMe: incorrect sense key is returned for Access Denied NVMe status(DCSG00063924 (Port Of Defect DCSG00069167)
 -Ventura: The host PCIe link width may be narrower than expected(DCSG00078678 (Port Of Defect DCSG00093473)
 -Host utility can still manage LEDs when downgrading from FW with jbodhostledmgmt enabled to FW with jbodhostledmgmt disabled(DCSG00230907 (Port Of Defect DCSG00240950)
 -Aero MR7.16PA - snapdump hang during capture in Legacy BIOS(DCSG00318700 (Port Of Defect DCSG00319426)
 -Drives connected behind external card with VSES disabled, failed to detect in Linux OS(DCSG00350402 (Port Of Defect DCSG00366257)
 -COL Failure on AC cycle(DCSG00132764 (Port Of Defect DCSG00143276)
 -Some of the drives not listed under Widows OS Disk Management.(DCSG00096508 (Port Of Defect DCSG00102661)
 -Some of the JBODs are not included under "PR excluded VD" , while performing storcli /cx show pr when all the drives are converted to JBOD.(DCSG00126731 (Port Of Defect DCSG00240682)
 -Auto R0 Available in eHBA mode, Fails when selected(DCSG00079651 (Port Of Defect DCSG00082123)
 -FW fault seen during server bootup.(DCSG00345176 (Port Of Defect DCSG00409078)
 -Expander_FW : Expander FW upgrade or downgrade through CIMC is not getting reflected on host applications(DCSG00171248 (Port Of Defect DCSG00228310)
 -pl: NVMe: Drive Firmware update fails on mode 0xE(DCSG00044028 (Port Of Defect DCSG00052008)
 -Back out changes of ER DCSG00029633 that limits VSES devices to 2(DCSG00053379 (Port Of Defect DCSG00054368)
 -Parameter changed event is not generated after changing autoconfigure behavior from Off to non-raid disk(DCSG00370382 (Port Of Defect DCSG00399183)
 -Atlas Behind Aero: PL Fault 0xEC1A When Performing Backend PCI Resets From Diagnostic Code(DCSG00042688 (Port Of Defect DCSG00147003)
 -BSOD when running CoreDump with Aero connected to Atlas switch(DCSG00042497 (Port Of Defect DCSG00044353)
 -Incomplete foreign configuration when importing LKM into EKMS environment(DCSG00068694 (Port Of Defect DCSG00072326)
 -Fail to read device and link related counters from Page 250(DCSG00080856 (Port Of Defect DCSG00096620)
 -Critical Boot messages not being handled properly during OCR(DCSG00098242 (Port Of Defect DCSG00105198)
 -Aero: Firmware Download should return success with loginfo indicating POR is necessary(DCSG00055371 (Port Of Defect DCSG00065882)
 -In JBOD profile, set VD Write Cache to AWB shows success even though WB Supported is set to NO(DCSG00113956 (Port Of Defect DCSG00240943)
 -PL: Over 250+ power cycles of managed switch (Atlas) causes an associated SES to be inaccessible(DCSG00048699 (Port Of Defect DCSG00059743)
 -[Aero][PLDM] FW version reported wrongly to BMC( Board Management Controller) over out of band(DCSG00050201 (Port Of Defect DCSG00051130)
 -Duplicate event messages are coming in storage logs while scheduling consistency check(DCSG00379811 (Port Of Defect DCSG00408168)
 -[Aero/Ventura] Unused phys are managed by VSes in SGPIO BP mode(DCSG00151021 (Port Of Defect DCSG00225221)
 -PERC 10.5 FW version missing in /c0 show and Hii(DCSG00069395 (Port Of Defect DCSG00072332)
 -SPDM_FW : SPDM commands are failing in OOB SL/SLT on Trinity M6 servers.(DCSG00126744 (Port Of Defect DCSG00220869)
 -Controller fault on rebuild and IO(DCSG00314225 (Port Of Defect DCSG00342265)
 -Aero: backend PCIe: link failure after PCIe IO Unit Page 1 link disable(DCSG00050164 (Port Of Defect DCSG00051710)
 -pl: NVMe: EC0E fault after drive pull during NVMe init(DCSG00114179 (Port Of Defect DCSG00127917)
 -The personality behavior=None is allowed to be set.(DCSG00079271 (Port Of Defect DCSG00082101)
 -Unsupported drive LED Solid Green on Rear Backplane - LED flashing green expected(DCSG00130055 (Port Of Defect DCSG00221408)
 -Cli utility allows auto config option when it is not supported(DCSG00119468 (Port Of Defect DCSG00220685)
 -0xD101 Fault observed running non-RW IOs to NVMe devices with drive push-pull(DCSG00062701 (Port Of Defect DCSG00071043)
 -PH14 Windows Driver: on 2016,19H2 OS,Getting BSOD for fault command(DCSG00048607 (Port Of Defect DCSG00053744)
 -SEKM: Cannot Secure VD once VD is created(DCSG00087745 (Port Of Defect DCSG00093722)
 -Command to get ld Allowed Ops Ext can be called with wrong buffer length.(DCSG00223430 (Port Of Defect DCSG00246019)
 -Drives returns incorrect session name in SEKM environment(DCSG00229451 (Port Of Defect DCSG00242932)
 -[NVMe] SCSI log sense command timeouts seen while running 1MB IOs to NVMe drive(DCSG00136092 (Port Of Defect DCSG00243680)
 -[9460-8i+MR7.12 Patch+X86] Use script to upgrade Huawei-made SAS SSD firmware underneath 9460-8i (7.9, 7.11, and 7.12) will fail(DCSG00124592 (Port Of Defect DCSG00240578)
 -[9460-8i+MR7.12 Patch+X86] Use script to upgrade Huawei-made SAS SSD firmware underneath 9460-8i (7.9, 7.11, and 7.12) will fail(DCSG00124592 (Port Of Defect DCSG00240573)
 -NVMe drive hotplug discovery of Ugood drives taking longer (1 minute)(DCSG00313017 (Port Of Defect DCSG00378629)
 -9460-8i faults repeatedly at fw\raid\utils.c(DCSG00265811 (Port Of Defect DCSG00334584)
 -MCTP: SenseData not available for a failed command sent over OOB.(DCSG00054655 (Port Of Defect DCSG00057485)
 -Number of initiators gets decremented to 0xFF(DCSG00051990 (Port Of Defect DCSG00053834)
 -Quotes present in NVDATA XMLs(DCSG00045528 (Port Of Defect DCSG00045606)
 -Attempting to enable Host LED Management option fails in HII.(DCSG00075900 (Port Of Defect DCSG00082099)
 -FW exception when get snapdump is initiated(DCSG00069689 (Port Of Defect DCSG00077079)
 -Locate PD fail on SGPIO enclosure when GroupId is disabled in Nvdata.(DCSG00034489 (Port Of Defect DCSG00041403)
 -Fault 0x6109 while running IOs and device remove test.(DCSG00082201 (Port Of Defect DCSG00083887)
 -[Aero/Ventura]Allow the backplane detection state machine to retry the FRU detection.(DCSG00219908 (Port Of Defect DCSG00222984)
 -Disable break mirror support(DCSG00147889 (Port Of Defect DCSG00216978)
 -(SATA Only) MODE SELECT (6|10) to SATA drive with DEXCPT set fails if DEXCPT is already set.(DCSG00131574 (Port Of Defect DCSG00134494)
 -AUTOCFG parameters- EPDParams is set incorrectly for NONE/OFF mode(DCSG00127771 (Port Of Defect DCSG00220705)
 -Inadvertent stack printing present at pd insertion(DCSG00365832 (Port Of Defect DCSG00386300)
 -CLI allows auto configure R0 immediate command in ePD pass-through mode(DCSG00119569 (Port Of Defect DCSG00122765)
 -For an OEM - Unable to pause Patrol read via perccli(DCSG00059007 (Port Of Defect DCSG00078513)
 -Auto Secure SED failure status is different in 2 different generation controllers.(DCSG00227232 (Port Of Defect DCSG00240947)
 -HGST Vela-A drive failing media error tests.(DCSG00232413 (Port Of Defect DCSG00325834)
 -PL: TM Device Reset to NVMe drive under out of LMID condition can cause Data Abort Exception to the processor(DCSG00036763 (Port Of Defect DCSG00048676)
 -Change adapterOperations5.supportNvmeWidths to 0 as NVME is not supported(DCSG00111498 (Port Of Defect DCSG00114403)
 -Index out of range is observed for print in ring buffer logs(DCSG00134669 (Port Of Defect DCSG00139071)
 -After loading aero driver, the VD of the controller cannot be listed(DCSG00297806 (Port Of Defect DCSG00311840)
 -9460-16i MR FW marks Zoned Out PHYs as bad PHYs(DCSG00318971 (Port Of Defect DCSG00329429)
 -Virtual drives offline during Ibanez HBA firmware upgrade/downgrade test using storcli(DCSG00343804 (Port Of Defect DCSG00411425)
 -PL Fault 0000e40e while booting OS with bad NVMe drive(DCSG00109053 (Port Of Defect DCSG00118379)
 -NVMe devices VPD page 83 NAA descriptor may conflict with EUI64 ID reported(DCSG00060347 (Port Of Defect DCSG00136105)
 -Assertion failure in fw\raid\fwDownload.c at line 1182 observed, while downloading the Atlas FW in "Atlas Behind Aero" configuration(DCSG00354677 (Port Of Defect DCSG00366042)
 -SATA Only: Command timeout observerd on SATA drives(DCSG00344039 (Port Of Defect DCSG00356006)
 -MR Ventura FW in JBOD mode still allows security erase by hdparm(DCSG00104151 (Port Of Defect DCSG00119639)
 -Fix ring buffer decoder's slowness with decoding a trace buffer(DCSG00050675 (Port Of Defect DCSG00051120)
 -In RAID personality autoconfig off mode should not be displayed(DCSG00077812 (Port Of Defect DCSG00082120)
 -Aero MR 7.17PA - After SMC legacy bios boot message, snapdump content is missing(DCSG00412164 (Port Of Defect DCSG00423860)
 -Autoconfig paramter Set Auto R0 Mode is not set correctly for eHBA personality.(DCSG00081229 (Port Of Defect DCSG00082135)
 -NVMe drives not discovered and Event replay in enclosure slot mapping not working as expected.(DCSG00078212 (Port Of Defect DCSG00080846)
 -Firmware asserts during customer specific UBM Backplane enumeration.(DCSG00058770 (Port Of Defect DCSG00061183)
 -Direct attached PFA drive - LED is neither ON nor Blinking(DCSG00111492 (Port Of Defect DCSG00143188)
 -NVMe Sanitize completion path and print message modifications(DCSG00080240 (Port Of Defect DCSG00082133)
 -AXI access error from TxDMA engine when certain errors occur during Task Management processing(DCSG00078508 (Port Of Defect DCSG00235435)
 -[Aero][AutoPort Enable] Erase persistent config pages is not retaining the VPD and sas address(DCSG00074378 (Port Of Defect DCSG00114250)
 -[Aero][PLDM] Update to Latest PLDM library v13(DCSG00137629 (Port Of Defect DCSG00138016)
 -Import certificate command is failing via In-band(DCSG00212544 (Port Of Defect DCSG00215132)
 -[VSes] Element status set to 'Unknown' in SES page 2 of VSES for some phys where nothing is connected.(DCSG00333163 (Port Of Defect DCSG00343846)
 -Fix Opal function to relock PD(DCSG00409615 (Port Of Defect DCSG00420418)
 -MR 7.16A controller continuously dumps unexpected sense 7/20/02 for a Jbod and the drives cannot be erased.(DCSG00363682 (Port Of Defect DCSG00395386)
 -FW not checking bound on tty read DCMD, leading to send tty log twice.(DCSG00134946 (Port Of Defect DCSG00220843)
 -Combination of Expander FW update and OOB inventory commands leads to Data abort exception.(DCSG00417301 (Port Of Defect DCSG00428330)
 -Aero A0: In Windows OS redundant disks detected when controller connected to Elrond Ex1(DCSG00061406 (Port Of Defect DCSG00065448)
 -Patrol read (and CC) causing OS boot failure on media error correction(DCSG00080809 (Port Of Defect DCSG00098159)
 -pl: backend PCIe: 'pl pci devlnk' is missing from the 'pl dbg' dump(DCSG00052268 (Port Of Defect DCSG00052348)
 -Expose enclosure controller property is being reset at every boot(DCSG00244065 (Port Of Defect DCSG00246029)
 -NVMe devices VPD page 83 NAA descriptor may conflict with EUI64 ID reported(DCSG00148775 (Port Of Defect DCSG00153702)
 -Ventura; Add code to prevent downgrade from phase 14 to previous phases for winbond(DCSG00059594 (Port Of Defect DCSG00061399)
 -Aero: pl: SATA device may not link up following a link down(DCSG00054906 (Port Of Defect DCSG00073959)
 -Controller crash and resets on attempt to boot to windows OS(DCSG00099330 (Port Of Defect DCSG00258053)
 -[9440-8i + MR7.14 + ARM] Controller hit Fatal error when doing drives hard reset test by storelibtest(DCSG00312453 (Port Of Defect DCSG00318217)
 -Auto Cfg Parameters Changed is not generated when host led management is changed.(DCSG00118646 (Port Of Defect DCSG00220598)
 -PL: Blind retries by MegaRAID FW when PL is in out of resource condition results in IOs to MS-SES exhausting retries(DCSG00033753 (Port Of Defect DCSG00046628)
 -DHSP to GHSP is generating duplicate alerts(DCSG00081077 (Port Of Defect DCSG00084765)
 -NVMe Identify Controller sent over OOB fails with MFI_STAT_INVALID_CMD(DCSG00165400 (Port Of Defect DCSG00219970)
 -Event is generated even though LDBBM table is not updated(DCSG00259244 (Port Of Defect DCSG00293136)
 -[MR3508+MR7.14 +X86 ] Controller is seen with Fatal error by unknown reason unexpectedly (XH628 V5's 3508 mem.c issue)(DCSG00312708 (Port Of Defect DCSG00316966)
 -Bad Phy events are generated for UBM slots with element status = NO_ACCESS_ALLOWED(DCSG00336611 (Port Of Defect DCSG00342269)
 -Rebooting from the OS hangs at a blank screen and does not report the Shutdown AEN(DCSG00258074 (Port Of Defect DCSG00278410)
 -Assertion failure in fw\ddf\ddfPd.c seen during foreign import(DCSG00272547 (Port Of Defect DCSG00297147)
 -For an OEM, Install of RHEL 8.0 using NVME PD R0 fails. It will error out during the creation of the UEFI partition(DCSG00077835 (Port Of Defect DCSG00099954)
 -SATA only : Controller hang is observed due to recursive function call.(DCSG00139294 (Port Of Defect DCSG00226371)
 -pl: NVMe: unexpected NVMe init failure if LBA 0 is inaccessible(DCSG00120588 (Port Of Defect DCSG00121315)
 -CurrentControllerMode Value is Showing "null" instead Of "RAID"(DCSG00149932 (Port Of Defect DCSG00216977)
 -[9440-8i+MR7.12/7.13/7.14Beta2+ARM] controller FW printed Assertion failure in fw\cpu\arm\exceptions.c at line 1006: 0 during fio issue verify(2F) commands to sas hdd(JBOD)(DCSG00236990 (Port Of Defect DCSG00244898)
 -PL SATA: Sanitize operation is completed before actual completion from drive.(DCSG00119155 (Port Of Defect DCSG00126831)
 -Preboot uitlity HII shows enable host led management button when feature is not available.(DCSG00229197 (Port Of Defect DCSG00246024)
 -pl: NVMe: Select field used during NVMe init without verifying support(DCSG00050182 (Port Of Defect DCSG00051206)
 -Aero A0: External cards do not support PCIe and SRIS by default(DCSG00131571 (Port Of Defect DCSG00143420)
 -Incorrect slot mapping on UBM backplane with additional DFCs support(DCSG00077969 (Port Of Defect DCSG00082256)
 -[9440-8i + MR7.14 ARM/X86] Auto config RAID0 in HII didnot work as expected(DCSG00297592 (Port Of Defect DCSG00302395)
 -Not able to enable JBOD property in Ventura controllers(DCSG00069029 (Port Of Defect DCSG00077146)
 -Complete config missing boot message shown for NON-RLM case(DCSG00091414 (Port Of Defect DCSG00105196)
 -Invalidate slot not working for IT SPDM(DCSG00131485 (Port Of Defect DCSG00139744)
 -OEM: OOB SLT returns error 0x7004 when run SelfCheckingDiagnostic option(DCSG00352769 (Port Of Defect DCSG00362761)
 -The personality behavior=None is allowed to be set.(DCSG00079271 (Port Of Defect DCSG00165536)
 -Unsupported drive LED Solid Green on Rear Backplane - LED flashing green expected(DCSG00130055 (Port Of Defect DCSG00216979)
 -MR controller resets(DCSG00119480 (Port Of Defect DCSG00220841)
 -Drive Discovery failed with Port Hot-swap on Aero16e controller(DCSG00042446 (Port Of Defect DCSG00052013)
 -[Aero/Ventura] Bootloader corruption with firmware download and DC cycle in loop.(DCSG00238233 (Port Of Defect DCSG00245453)
 -CTRL_MFC_DEFAULTS_SET DCMD returning error when PERC in eHBA mode(DCSG00227153 (Port Of Defect DCSG00237600)
 -COL Failure on AC cycle(DCSG00132764 (Port Of Defect DCSG00167574)
 -ExtManPage41 TX Values are not being applied / run by AERO SERDES(DCSG00311524 (Port Of Defect DCSG00315525)
 -autoconfig field is not set to None when firmware is upgraded to current programme package(DCSG00113492 (Port Of Defect DCSG00143274)
 -Allowed Cfg Options does not show support for SINGLE_PD_R0 option(DCSG00083472 (Port Of Defect DCSG00084767)
 -[9440-8i+X86+MR7.13] SSD JBOD Drive state will change from (U-Up) to (D-Down/PowerSave) when they rmmod and insmod megaraid(DCSG00265980 (Port Of Defect DCSG00322200)
 -extend timeout for OOB command for SATA EPC enabled drive(DCSG00335204 (Port Of Defect DCSG00350449)
 -Last LDBBM entry in the list is not cleared after VD Deletion(DCSG00255330 (Port Of Defect DCSG00297028)
 -StorCLI shows success in Converting Foreign drive as JBOD.(DCSG00261213 (Port Of Defect DCSG00277787)
 -VSES page 02h reports incorrect status for linkup failed array device element on certain UBM slots(DCSG00112320 (Port Of Defect DCSG00127720)
 -Ventura B0: Device discovery fails on 9400-16e(DCSG00045385 (Port Of Defect DCSG00045779)
 -Aero config import from file fails with EPD-JBOD drives(DCSG00096587 (Port Of Defect DCSG00107691)
 -PL : 0x7008 fault seen when booting the bad clocked controller connected to Atlas(DCSG00114774 (Port Of Defect DCSG00121424)
 -Expander attached devices not reported to host if enclosure slot ordering is enabled in event replay.(DCSG00108094 (Port Of Defect DCSG00111584)
 -Fix unnecessarily generated fatal event in status process for unlock PD(DCSG00378774 (Port Of Defect DCSG00395841)
 -PL: 2 Atlases in single MPT mode with 2 host ports each will have drives on one switch not mapped to that Atlas's SES Page 0Ah(DCSG00054949 (Port Of Defect DCSG00062379)
 -Upto 90% performance drop with expander attached configuration.(DCSG00153860 (Port Of Defect DCSG00215210)
 -PL: PCIe switch discovery can cause processor exception when setting enclosure information(DCSG00063530 (Port Of Defect DCSG00063552)
 -PL backend PCIe: PL fault 0xD308 is observed with Aero and Atlas connected in bad clock environment(DCSG00134207 (Port Of Defect DCSG00137697)
 -Cisco - CSCvu90346 - SAS Controller Asserts if SubOEMID that is not in NVDATA is selected(DCSG00309776 (Port Of Defect DCSG00349160)
 -Aero: backend PCIe: link failure following link down(DCSG00043821 (Port Of Defect DCSG00048732)
 -Secured EPD IO Error = media is write protected after continuous PushPull within 2 seconds(DCSG00081483 (Port Of Defect DCSG00218465)
 -FW faults during driver unload and load process(DCSG00107743 (Port Of Defect DCSG00228865)
 -Dev-defect: Reset SES Mgmt flags after the reboot (not in the same boot) when personality changed to RAID.(DCSG00118666 (Port Of Defect DCSG00122763)
 -Incorrect Man page 7 Phy-Slot mapping set for 9500-xx channel HBAs(DCSG00061349 (Port Of Defect DCSG00062359)
 -[Aero] Change the Manpage 7 Phy to Connector settings and Disable NVMe support in ManPage9(DCSG00031186 (Port Of Defect DCSG00044352)
 -logGet: Found invalid event at e82858c4 pe 1411(DCSG00040960 (Port Of Defect DCSG00082112)
 -[9361-8i MR6.14] storcli return with error when set patrolread mode(DCSG00072635 (Port Of Defect DCSG00075239)
 -[SPDM IT] Return actual size of certificate chain content to SPDM LIB(DCSG00233805 (Port Of Defect DCSG00245634)
 -PL SATA only : SATA init timeout observed due to drive taking longer to respond to sanitize status ext(DCSG00225935 (Port Of Defect DCSG00227376)
 -IOC Exceptions not getting cleared after flashing the BIOS image with correct ROP version(DCSG00226395 (Port Of Defect DCSG00227987)
 -EKM many key request events generated when creating secured VDs with multiple disks(DCSG00141624 (Port Of Defect DCSG00216974)
 -NVmeAdmin: Assertion failure in fw\raid\nvmePRP.c seen when NVMe PT response size is >=12k(DCSG00223413 (Port Of Defect DCSG00242570)
 -AXI access errors causing FW asserts or faults due to invalid SATA passthrough commands(DCSG00215338 (Port Of Defect DCSG00243095)
 -(SATA Only) SCSI ATA Passthrough command with data transfer fails.(DCSG00120976 (Port Of Defect DCSG00121420)
 -storcli show success for PDCache setting change on VD even though Cache setting of drive was not changed(DCSG00319375 (Port Of Defect DCSG00349021)
 -NVMe Init Error List has drive entry missing when multiple Bad PDs are inserted(DCSG00113697 (Port Of Defect DCSG00121316)
 -Current version of Back plane firmware does not display correct after update, Pathfinder(DCSG00239284 (Port Of Defect DCSG00245055)
 -Fix code for proper use of patrol-read active and msgActive flags(DCSG00079695 (Port Of Defect DCSG00082129)
 -SAS9341-8i board encounters 'Previous configuration completely missing at boot' error(DCSG00067176 (Port Of Defect DCSG00075326)
 -Toolbox clean command sent to clean flash fails.(DCSG00059302 (Port Of Defect DCSG00062455)
 -Utility not providing an VD task to encrypt a VD (post creation)(DCSG00101763 (Port Of Defect DCSG00105200)
 -Target ID of EPD drives is not equal to Slot ID when drives are connected(DCSG00167860 (Port Of Defect DCSG00240678)
 -Dev-Defect - PRP-List overwritten in Double-Buffer-Copy-To-Host for response size > 8K(DCSG00258471 (Port Of Defect DCSG00269098)
 -Aero_scrutinycli: "Device -c" command output is not matching with the firmware cli parameter values in Aero behind atlas configuration.(DCSG00121852 (Port Of Defect DCSG00127910)
 -FW is overriding the data length , present in the command frame header, with sizeof (MR_LD_ALLOWED_OPS_EXT)(DCSG00322186 (Port Of Defect DCSG00342267)
 -9440-8i System black screen and hang during S4 + CC stress(DCSG00297794 (Port Of Defect DCSG00311470)
 -tty battery FRU sometime corrupt when reading from cli(DCSG00222664 (Port Of Defect DCSG00230726)
 -NVMe Init Error: Device with no namespaces shows 'Namespace count Invalid' as Unrecoverable Error(DCSG00290593 (Port Of Defect DCSG00303511)
 -Moving Controller From Single VSES config to a multi-VSES config causes issues in windows OS.(DCSG00071784 (Port Of Defect DCSG00080399)
 -PL NVMe : PCI task management is not getting completed.(DCSG00231422 (Port Of Defect DCSG00266052)
 -PL: 9460-16i incorrect slot numbers assigned attaching to OEM specific mixed mode backplane(DCSG00243953 (Port Of Defect DCSG00340147)
 -NVMe repair command fails with 'No drive support for recovery' loginfo(DCSG00129498 (Port Of Defect DCSG00137668)
 -supportEPDWithAutoConfigOff supported bit is set as 1(DCSG00239272 (Port Of Defect DCSG00242941)
 -StorCLI shows success in Converting Foreign drive as JBOD.(DCSG00261213 (Port Of Defect DCSG00299706)
 -MR FW not responding to resume within 3 seconds(DCSG00243834 (Port Of Defect DCSG00304052)
 -Expander_FW : Expander FW upgrade or downgrade through CIMC is not getting reflected on host applications(DCSG00171248 (Port Of Defect DCSG00232623)
 -[Aero] Fault 0xA03 observed when updating FW with a bad NVMe drive in the topology(DCSG00132639 (Port Of Defect DCSG00136250)
 -scattered file changes to include some debug prints and also minor change to debug print(DCSG00057124 (Port Of Defect DCSG00057818)
 -SPDM IT:SPDM BMC bring up on P2 server(DCSG00238540 (Port Of Defect DCSG00241397)
 -Aero: PL with newer Atlas FW (4.2) has extra slot number in the Atlas enclosure(DCSG00284238 (Port Of Defect DCSG00291431)
 -Cisco: Found "C0: Dumping poll data. total length = 3, objtype 0", these message coming to uart firmware log continuously after update BMC(DCSG00349880 (Port Of Defect DCSG00419731)
 -VSES - SES page not set correctly for Front adapters(DCSG00084525 (Port Of Defect DCSG00093718)
 -NvmeAdmin: 'Exception handler called' observed while converting drive to Non RAID preceded by Export Log from OM(DCSG00224879 (Port Of Defect DCSG00242573)

EnhancementRequests:
 -SCONS: Update signing call to utilize new digest argument(DCSG00365964)
 -PL: Support Managed Switch (Atlas) slot range VSEC command for its single MPT mode(DCSG00071626)
 -Snapdump performance improvements(DCSG00066931)
 -Address the issue found during code review - flush write verify issues on MR7(DCSG00011893)
 -Populate currentSpeed for SAS Phys(DCSG00072397)
 -SEA IT TRNG HW enable(DCSG00098752)
 -Make PLDM (Type 2) specific changes as per Smart Storage System Design Specification RevisionV 1.64(DCSG00039603)
 -Modify generate HBICList script(DCSG00105230)
 -Health Data Events - Create counters for various Health Data Events(DCSG00078912)
 -No Longer Close Flash for Error Cases(DCSG00061091)
 -Ventura/Aero: Add Ext. Man Page 48 to store CoreDump options(DCSG00026309)
 -Add output to RMC log to indicate image is for debug use(DCSG00080714)
 -Add Aero/Sea Info to Ventura Summary Release Notes(DCSG00077941)
 -Aero3: SecureBoot BIOS Image Download with new Key is failing(DCSG00233694)
 -Snapdump doesn't log recon ld info(DCSG00132717)
 -Platform related configuration changes updation(DCSG00039844)
 -Enable SAS 240K R5 RW on MR7.15(DCSG00241136)
 -OOB diagnostic Test Improvments(DCSG00051246)
 -Support for config reset protocol(DCSG00062958
 -SPDM: Implementation: Implement CDI generation and ECDSA Key Pair generation(DCSG00060737)
 -Aero+Cub Multi-path improvements(DCSG00063755)
 -Update HWBIC Generation XMLs for CQ9(DCSG00100142)
 -SPDMLIB: OEM requested to not report Get Measurement Capable(DCSG00323053)
 -SCONS: Add IOP_SUBSYSTEM_ enums to assembly(DCSG00341313)
 -Release Automation: Submit auto-BST jobs(DCSG00091315)
 -Update secureSign build process to sign executables with Broadcom windows authenticode signing key(DCSG00381469)
 -Ctrl - H support for pkg - secure Image flash validation(DCSG00137059)
 -Persisting secureLD targetId bitmap(DCSG00237413)
 -Resolving the compilation conflicts while integrating the library with FW(DCSG00045448)
 -Certificate read and Write wrapper functions & Slot management(DCSG00105005)
 -Automate Build Job and Release Job Submission Process(DCSG00045139)
 -Remove A0 raw fw rawA0.fw file from release scripts(DCSG00211914)
 -MPI changes to configure backend ASPM(DCSG00051277)
 -Megamon commands enabled for testing mbedtls library(DCSG00036604)
 -Avenger support for the LIBSPDM(DCSG00081168)
 -pl: SATA: vendor specific ATA Standby handling(DCSG00074400)
 -On 9440-8i controllers, do not update timeout value for a DCDB issued by host on JBOD(DCSG00128903)
 -Update WWID in the PCIe interface structure for PCIe switches(DCSG00152603)
 -Aero/Ventura: Enable easier debug when SPI FLASH is bad(DCSG00058537)
 -Log SPDM events entries in log page 0(DCSG00139949)
 -PL: NVMe Drive Repair(DCSG00055563)
 -(DCSG00395629)
 -Implement a secure version of memset for SPDM code to use to zero out buffer(DCSG00208365)
 -Automate version update stage in release process(DCSG00122144)
 -SPDM LIB: Implement version scheme(DCSG00072483)
 -Implemented newUBMBackplane type support.(DCSG00049601)
 -PL logic to create VSES instances per Backplane number(DCSG00069245)
 -Enable NS management and Format commands in the PT path(DCSG00129551)
 -Cisco sg_sanitize PT support(DCSG00232659)
 -SPDM_LIBRARY: Change for SPDM Policy Implementation(DCSG00097417)
 -[Aero][Ventura] Sign windows build applications and avoid antivirus from deleting them.(DCSG00025757)
 -Allow General Processing Failure from Atlas on unsupported commands to not result in 0xEA20 fault(DCSG00170698)
 -Added SPDM lib to IT FW code base and handle MCTP VDM SPDM commands(DCSG00063688)
 -SSD Wear gauge per Smart Storage Design Specification 1.64(DCSG00028105)
 -SPDM: Test the Library Integration. UT framework in MR Megamon(DCSG00037855)
 -BST - Reset(DCSG00335443)
 -Add preboot environment variables to snapdump logs.(DCSG00139621)
 -MBEDTLS LIB: Enhancement to source of randomness for generating key pair(DCSG00148786)
 -Shenandoah COL BST Script(DCSG00355898)
 -[Aero] [SPDM] Support Export Certificate Signing Request command(DCSG00063692)
 -SPDM:7.15: Parse certificate to X.509 V3 Standard and verify digital signature to affirm chain of trust(DCSG00216859)
 -Add optional arg '-hash_algorithm' that will accept -sha256 or -sha512 but if that arg is not provided then it will default to -sha512(DCSG00353453)
 -Ventura/Aero: Update SPI flash test to print better failure information(DCSG00070917)
 -Remove cdi get for Avenger(DCSG00152679)
 -Atlas drives connected to an OEM controller behind Atlas PCI switch SMART polling 10s interval(DCSG00051225)
 -PL: Coordinate reset on Atlas FW update to limit IO disruption to NVMe drives behind Atlas(DCSG00097342)
 -Multi-Chemistry BMU support(DCSG00018257)
 -MbedTLS: Explicitly make enumerator value of enum type to 4-byte value(DCSG00054557)
 -MBEDTLS LIB: Rename sha256.h header file to avoid conflict with MR FW sha256.h header file(DCSG00068675)
 -Enable 24 PCIe device support for Aero External boards.(DCSG00278073)
 -Add support for TCG Enterprise SED drives that require Packet.SessionNumber to be zero for Open, Close, Config, Sync(DCSG00060670)
 -Preboot Trace Buffer [PTB] for Ventura/Aero - MR Firmware(DCSG00054971)
 -Aero: Add support for SPDM ExtManPage 52(DCSG00108545)
 -SPDM: Implementation: Implement Subject Name validation for CSR (Certfificate Signing Request) and CSR generation(DCSG00069168)
 -Release Automation: Validate FW Header post Package Creation(DCSG00055071)
 -CFGI Integration for MR(DCSG00077966)
 -Displaying "Volume" instead of "Logical Drive" or "LD" in events and boot messages.(DCSG00029102)
 -Release Automation: create Aero IT FW only Release Order Package(DCSG00066845)
 -SPDM LIB: Implement SPDM Get Measurement command(DCSG00234758)
 -pl: backend PCIe: PCIe Hinting(DCSG00050640)
 -Disable hardware debug ports(DCSG00143569)
 -SPDM: Coding: Implement SPDM Commands (SPDM Lib Shell & Client of SPDM Lib)(DCSG00039443)
 -RDE - Implement support for dynamic PDR repository change in Managed Device Firmware(DCSG00167169)
 -Add framework to inject correctable errors to endpoint in Atlas dev bst(DCSG00306577
 -Aero/Ventura: Add CLI to test QE bit modification(DCSG00148653)
 -Shenandoah - Implement PLDM RDE Platform Firmware(DCSG00068974)
 -pl: NVMe: handle Namespace Not Ready error during NVMe init(DCSG00071652)
 -MbedTLS Lib: disable file system related functions & enable memory allocation and prints functions to be compiled in CPP environment(DCSG00060384)
 -CDI & Key Generation source integration with IT FW(DCSG00063690)
 -SPDM: 7.15: Enhancement to source of randomness for generating key pair(DCSG00148777
 -Revert 145.1 Changes(DCSG00431043)
 -Update PLI Spec(DCSG00008045)
 -Preboot Trace Buffer [PTB] for Ventura/Aero - add a switch - MR firmware(DCSG00227036)
 -pl: backend PCIe: examine BAR attributes following endpoint/switch reset(DCSG00060688)
 -SECUREBOOT_LIB: Move hardware touch (ApSha HASH & HMAC and OTP eFuse Read) from MR SPDM code to Secure Boot Lib(DCSG00082166)
 -Update Sea Channel XMLs to PCI Device ID 0xE6(DCSG00079238)
 -Preboot Trace Buffer [PTB] for Ventura/Aero - add a switch - nvram(DCSG00228248)
 -Coverity Upgrade Aero Build to latest version(DCSG00103023)
 -Populate connector name from sas device page 0.(DCSG00051271)
 -SPDM:7.15: Export CSR & Import Cert Open & Close Session(DCSG00167484
 -SPDM: Implement a secure version of memset for SPDM code to use to zero out buffer(DCSG00126569)
 -Implement to change i2c messages to etty(DCSG00065857)
 -NVMe Drive Init failure Error Reporting(DCSG00055566)
 -MBEDTLS LIB: Change large local variable memory allocation from the stack to dynamic memory allocation from the heap(DCSG00087564)
 -Vendor requested megamon command to simulate bad flash to be supported all its boards(DCSG00313349)
 -Aero/Ventura: Move DMCore hardware file to common(DCSG00007511)
 -Add Avenger support for libmbed tls.(DCSG00051695)
 -SPDM: Implementation: Rename sha256.h header file to avoid conflict with MR FW sha256.h header file(DCSG00068681)
 -After purge operation, Blocking OOB traffic.(DCSG00071207)
 -pl: NVMe: handle Namespace Not Ready error during NVMe init (part 2)(DCSG00075871)
 -Resolving the compilation conflicts while integrating the library with FW(DCSG00045470)
 -[Aero][SPDM] IOP framework to support CFGI Reads and Writes(DCSG00076512)
 -SPDM: Implement Security Page Wrapper for reading/writing key page(DCSG00096299)
 -Allow full binTrc ETTY collection for on-demand snapdumps(DCSG00061636)
 -Add NVMe drive init failure condition tracking list(DCSG00077909)
 -[SPDM]SBlib upgrade to 2.02(DCSG00091314)
 -Provide Configurability For SPDM Library(DCSG00045604)
 -MBEDTLS LIB: Implementation: Use CDI to generate ECDSA key pair(DCSG00067411)
 -7.14 MR: Change for SPDM Policy Implementation(DCSG00098359)
 -Remove protection of NVDATA pages for channel(DCSG00079568)
 -Support getting the defaults and supported properties in Auto Config NONE mode(DCSG00215321)
 -Support snapdump for 216-x controllers(DCSG00151384)
 -Do not update timeout value for a DCDB issued by host on JBOD.(DCSG00058148)
 -SPDM_LIB: Support to build Challenge buffer with multiple GET_CERTIFICATE/CERTIFICATE_RESPONSE(DCSG00225175)
 -Populate UBM backplane fields as part of EFI_HP_ADAPTER_INFO_SMART_CARRIER_BACKPLANE_DATA(DCSG00062513)
 -Update Version descriptors for standard inquiry data of SATA and vSES devices(DCSG00037325)
 -Avenger OOB: PLDM Header Generation Tool(DCSG00132673)
 -[Aero SPDM] XSD changes to support SPDM version in a new manufacturing page(DCSG00103227)
 -Update NVMe to SCSI Error code translation.(DCSG00098339)
 -Added "pl serdes tx" and "pl serdes rx" command(DCSG00053828)
 -FW should reflect PD cache setting changes on EPD(DCSG00050115)
 -Support for NVMe Firmware Download when the image size exceeds the SNTL Transfer limitation.(DCSG00053656)
 -Disk labels need to be tied to fixed physical ports in order(DCSG00097307)
 -SPDM: Enable SPDM LIB support by default & improve the check for buffer size of ECDSA signature buffer which contains integer R and S in der format(DCSG00051715)
 -Shrink MbedTLS library size(DCSG00059001)
 -MBEDTLS LIB: Parse certificate to X.509 V3 Standard and verify digital signature to affirm chain of trust(DCSG00216867)
 -Add pkeyopt argument and support for checking for zero length input file and fail with appropriate error(DCSG00348441)
 -Add autoconfig debug prints to snapdump(DCSG00134888)
 -Update Windows CNG Key Gen and Signing operations to use SHA1 of CA Cert value from new CQ field(DCSG00369036)
 -Reverting branding changes(DCSG00061954)
 -ISE completion status to support UEFI Sanitize protocol(DCSG00062524)
 -Fix Mbedtls build scripts to accommodate Aero and Avenger(DCSG00150272)
 -MR SPDM:7.15: Implement client APIs for SPDM Get Measurement command (in SPDM LIB)(DCSG00234724)
 -Export of UBM backplane type to the platform(DCSG00046485)
 -Add support for U.2 UBM backplane(DCSG00118415)
 -Correcting the print function configuration(DCSG00047741)
 -Populate connector name from PCIe device page 0.(DCSG00057131)
 -Add milliseconds to etty print timestamps(DCSG00066928)
 -XSD and NVDATA changes to support SPDM manufacturing and Security pages(DCSG00063680)
 -LKM compliance to Cryptographic Algorithm Requirements v1.5(DCSG00330429)
 -SPDM: Coding: MR FW MCTP Handler ( SPDM Request & Response)(DCSG00039439)
 -Reduce rebuild delay for SSDs(DCSG00056703)
 -SECUREBOOT_LIB: Move SRK and CCR eFuse register access functions to SBLIB(DCSG00086765)
 -Package Stamping Verification(DCSG00096506)
 -Release Automation: Integrate utility for deliver/rebase into release scripts.(DCSG00094677)
 -SPDM: Move hardware touch (ApSha HASH & HMAC and OTP eFuse Read) from MR SPDM code to Secure Boot Lib(DCSG00082170)
 -Revert the algorithm which determine if offload is sustainable(DCSG00079183)
 -Config file changes to including prints(DCSG00047716)
 -pl: backend PCIe: add debug print for a discovery failure case(DCSG00083082
 -Shenandoah - Add Snapdump support for PLDM Type-2 and Type-6 platform modules(DCSG00226289)
 -NVMe Drive Repair command processing(DCSG00054950)
 -Release Automation: updates for rebase operation(DCSG00134475)
 -Adding Events Handling for NVMe Drive Init Error reporting/Repair(DCSG00055427)
 -MbedTLS lib integration with IT FW(DCSG00063687)
 -MBEDTLS: Implementation: Implement Subject Name validation for CSR (Certfificate Signing Request) and CSR generation(DCSG00069942)
 -Release Automation: Integration of all script modules(DCSG00120937)
 -SPDM: Implement Cert HMAC, Cert Key, Key HMAC, KEK, Nonce, AES decryption/encryption of key storage(DCSG00075028)
 -Security page 0 and page 1 - Wrapper(DCSG00092779)
 -Coordinate Atlas FW update to prevent unnecessary RAID volume cleanup due to devices spontaneously being removed while IO is active(DCSG00097340)
 -Support for the Smart Array MR216i-p/a Gen 10+ Controller(DCSG00041392)
 -Providing Link and Device Related Counters(DCSG00056834)
 -Aero 7.15: Enhancement for Exttty buffer on OOB debug print(DCSG00134972)
 -Implement secureSignLinuxDrv CLI tool for HSM managed keys with support for certTypes PKCS7|X509 using NFKM engine(DCSG00396377)
 -Aero3: Harden Managed Switch SES (Atlas) SES Page 0Ah translation with error injection framework(DCSG00037053)
 -Enhance Atlas Dev BST core framework(DCSG00350412)
 -Release Automation: Automate state transitions for ReleaseOrder(DCSG00035457)
 -ComboSerdes: add functionality for bypass ready waiting(DCSG00167482)
 -Aero SPDM Sblib change: provide sblib interface to disable specified HW debug port.(DCSG00166877)
 -Update NVDATA to display appropriate controller names and to remove invalid connectors(DCSG00068959)
 -Atlas DevBST: Add synthetic DPC verification test cases(DCSG00335033)
 -MBEDTLS LIB: Implement version scheme(DCSG00072481)
 -SPDM: Add messages to etty buffer as part of snapdump for SPDM(DCSG00123020)
 -Aero: Change XMEMCOPY default to disabled in Aero(DCSG00082841)
 -Cache bypass tuning on Aero(DCSG00051793)
 -SPDM library: Adding PLDM print module style.(DCSG00060323)
 -Support UBM diag tools in Scrutiny CLI for MR(DCSG00097311)
 -PLDM FW UPDT component classification updated(DCSG00060855)
 -Improve RMC debug image indicator(DCSG00093342)
 -PL UBM support UBM for PCIe SW upstream port config(DCSG00120726)
 -NVMe Drive Init failure Error Reporting.(DCSG00054970)
 -Implementation of changes as per new Energy Pack State transitions(DCSG00034018)
 -RDE - Display complete drive revision and model number strings in REST client(DCSG00105101)
 -Dev Unit Test : AER on Host Port and Downstream port is exposed(DCSG00355354)
 -MISC changes for NVMe drive repair(DCSG00086663)
 -7.15 SPDM: HW debug port disable and megamon utility limited access.(DCSG00148680)
 -SPDM: Add support for new bit CTRL INFO and new MFI status in MR API(DCSG00106381)
 -Implemented UBM box bay number support(DCSG00042528)
 -Add SasSerdesCtl0_7 registers to pl serdes(DCSG00069982)
 -SPDM Client Code Change: Adding PLDM print module style(DCSG00060325)
 -Support DEVICE_KEY_BASIS flags.(DCSG00342838)
 -pl: NVMe: update Block Limits VPD page translation(DCSG00055387)
 -Add support for C++/CPP compile for libspdm(DCSG00051200)
 -[Aero IT SPDM] Attestation policy at the boot-up time.(DCSG0006369)
 -SPDM: Remove hard-coded certificate chain and keypair(DCSG00126415)
 -NVRAM Aero SPDM Policy: Add Nvram flag to enable/disable SPDM feature in megamon(DCSG00112317)
 -Multi-path/Multi-port message filtering(DCSG00063756)
 -Adding critical events to a bad SAS/SATA drive that is consistently failing TM Reset(DCSG00298872 (Port Of EnhancementRequest DCSG00350451)
 -CIO deprecated IOtype display while recon Vd - to be removed(DCSG00301684 (Port Of EnhancementRequest DCSG00317150)
 -Extending SnapDump Persistence(DCSG00247000 (Port Of EnhancementRequest DCSG00266146)
 -Secure drive Crypto erase behavior change(DCSG00057696 (Port Of EnhancementRequest DCSG00129708)
 -Disk labels need to be tied to fixed physical ports in order(DCSG00240927 (Port Of EnhancementRequest DCSG00266089)
 -Initialize and persist SES management related flags when personality change from HBA to RAID(DCSG00112013 (Port Of EnhancementRequest DCSG00117802)
 -Enhancement to source of randomness for generating key pair(DCSG00208477 (Port Of EnhancementRequest DCSG00250093)
 -Monitoring Drive Performance and Predictive Failure feature to be removed for certain OEM(DCSG00082984 (Port Of EnhancementRequest DCSG00099031)
 -Support bit for "cannotExecuteOnce" autoconfig parameter needs to be set as 0 for all configure modes(DCSG00183076 (Port Of EnhancementRequest DCSG00230641)
 -This ER is to allow exposing of active internal expander based backplane to host for jbod LED management.(DCSG00109563 (Port Of EnhancementRequest DCSG00111427)
 -Treat PD missing for RLM only as critical(DCSG00056769 (Port Of EnhancementRequest DCSG00077311)
 -Change to the Powerloss Recovery Sequence to Recover Corrupted BMU Flash(DCSG00235822 (Port Of EnhancementRequest DCSG00242968)
 -MR FW changes to use Smart Polling Intervals values from NVDATA.(PR#DCSG00113187)(DCSG00211992 (Port Of EnhancementRequest DCSG00237772)
 -Change to BMU update process for power loss recovery(DCSG00072757 (Port Of EnhancementRequest DCSG00082107)
 -Aero SAS Performance Enhancement on AMD Rome as part of PR(DCSG00064583 (Port Of EnhancementRequest DCSG00065934)
 -SPDM IT: Add memory allocation/free for SPDM_LIB(DCSG00229260 (Port Of EnhancementRequest DCSG00241396)
 -Modify Ventura Build scripts to add a new Signed image with different AVSO Setting in FW RO(DCSG00231216 (Port Of EnhancementRequest DCSG00231535)
 -Restore Factory Default doesn't prompt user to reboot the system after being performed(DCSG00120440 (Port Of EnhancementRequest DCSG00122770)
 -DA-SEP internal backplanes host led management status not correct(DCSG00176030 (Port Of EnhancementRequest DCSG00223407)
 -Enable DST in NVMe Cmd Filtering(DCSG00076595 (Port Of EnhancementRequest DCSG00077206)
 -Add new security events(DCSG00167311 (Port Of EnhancementRequest DCSG00223401)
 -Aero Secure Boot: Add Key Update Pending Check for 'COMPLETE' Image Download(DCSG00241566 (Port Of EnhancementRequest DCSG00250024)
 -Advertise certain Secure Boot Properties using a config page for Application to be able to display it(DCSG00078835 (Port Of EnhancementRequest DCSG00093843)
 -(DCSG00057696 (Port Of EnhancementRequest DCSG00099028)
 -Execute once Auto configure option needs to be allowed for EPD-PT behaviour mode for certain controllers.(DCSG00216966 (Port Of EnhancementRequest DCSG00301658)
 -Preboot Trace Buffer [PTB] for Ventura/Aero - add a switch - MR firmware(DCSG00227036 (Port Of EnhancementRequest DCSG00255160)
 -Need a mechanism to get supported device protocols for each controller form factor(DCSG00108508 (Port Of EnhancementRequest DCSG00117796)
 -Add boot mode print to log during boot(DCSG00169640 (Port Of EnhancementRequest DCSG00223405)
 -Host access to internal backplane SEPs(DCSG00212119 (Port Of EnhancementRequest DCSG00223410)
 -Increase timeout value for Revert Tper commands to support drives from new drive vendor(DCSG00068257 (Port Of EnhancementRequest DCSG00077204)
 -Allow FW to reprovision UBAD drives(DCSG00054917 (Port Of EnhancementRequest DCSG00077287)
 -Snap-dump Enhancement - remove unnecessary duplicate prints(DCSG00312222 (Port Of EnhancementRequest DCSG00318525)
 -FW should treat copyback start as import success in case of secured drives.(DCSG00054919 (Port Of EnhancementRequest DCSG00077288)
 -In pre boot environment, if IO's received greater than 1MB reject the command with correct error status and not to Assert(DCSG00056745 (Port Of EnhancementRequest DCSG00078538)
 -Monitoring Drive Performance and Predictive Failure feature to be removed for certain OEM(DCSG00082984 (Port Of EnhancementRequest DCSG00322062)
 -In pre boot environment, if IO's received greater than 1MB reject the command with correct error status and not to Assert(DCSG00056745 (Port Of EnhancementRequest DCSG00077207)
 -Unblock the ability to secure EPDs via SEKM(DCSG00098356 (Port Of EnhancementRequest DCSG00105206)
 -EnhancementRequest DCSG00062819: SPDM: Implementation: DCMD Commands addition for Export/Import CSR(DCSG00062819 (Port Of EnhancementRequest DCSG00083491)
 -Include new field Auto Config Parameter structure to indicate that AutoConfig R0 property cannot be set .(DCSG00073908 (Port Of EnhancementRequest DCSG00077308)
 -Remove informational prints from tty log(DCSG00014871 (Port Of EnhancementRequest DCSG00072334)
 -MR FW feature to dump battery FRU data(DCSG00115404 (Port Of EnhancementRequest DCSG00117805)


Version 52.13.0-3623 - Moderate Impact/Low Probability of Occurrence
-------------------
    BIOS: 7.13.00.0
UEFI Driver:0x070D0301
HII: 07.13.06.06
MR FW: 5.130.02-3318
    package 52.13.0-3623

MR 7.13
Defects:
-Atlas Behind Aero BST is not working as the correct XML file is not copied.(DCSG00322761)
-Secure SED and SES Management ctrl properties are toggling after changing autoconfig from None to JBOD and vice versa..(DCSG00243819)
-Updated the forceUpdate format in PLDM header generation Tool.(DCSG00106563)
-Increase the time wait time when quad mode bit gets written for write operation to complete..(DCSG00061711)
-[NVMe] SCSI log sense command timeouts seen while running 1MB IOs to NVMe drive.(DCSG00136092)
-MR FW Assertion failure in snapdump module.(DCSG00120091)
-Updating FW (on 9400 series HBA) from Ph-7 to Ph-14 causes "invalid flash" message on FW bootup.(DCSG00167100)
-NVMe devices VPD page 83 NAA descriptor may conflict with EUI64 ID reported.(DCSG00060347)
-9440-8i+X86+MR7.13] SSD JBOD Drive state will change from (U-Up) to (D-Down/PowerSave) when they rmmod and insmod megaraid.(DCSG00265980)
-bst_jbod fails to change personality for iMR controller..(DCSG00105299)
-SPILIB 2.0: Cypress 256Mbit SPI Flash Is Not Supported.(DCSG00121768)
-Deleting file system during bst is not done using mrcli.(DCSG00103799)
-iMR BST VDs are getting created with read ahead property set..(DCSG00103807)
-StorCLI shows success in Converting Foreign drive as JBOD..(DCSG00261213)
-API clarification for large io support.(DCSG00307042)
-9460-8i faults repeatedly at fw\raid\utils.c.(DCSG00265811)
-SPILIB: Winbond 256MBit maximum page write time increased from rev "A" to rev "B" of their specification.(DCSG00170747)
-Fix error handling in traceTool.py.(DCSG00181406)
-Use NVRAM to save PTB information -- API changes.(DCSG00082981)
-VSES: Incorrect linkup failed elements status reported on certain slots of the UBM backplane.(DCSG00113486)
-Target ID of EPD drives is not equal to Slot ID when drives are connected.(DCSG00167860)
-Some of the JBODs are not included under "PR excluded VD" , while performing storcli /cx show pr when all the drives are converted to JBOD..(DCSG00126731)
-9440-8i System black screen and hang during S4 + CC stress.(DCSG00297794)
-Firmware Flash in loop:Assertion failure in fw\mros\mem.c at line 839 observed while flashing firmware in loop with OOB traffic.(DCSG00312138)
-Correct SPDM python script StepsToRun.txt, remove redundant bmc.tar.bz2 file..(DCSG00150282)
-VSES page 02h reports incorrect status for linkup failed array device element on certain UBM slots.(DCSG00112320)
-NVDATA XSD in MR is out of sync from the latest spec.(DCSG00234826)
-Aero config import from file fails with EPD-JBOD drives.(DCSG00096587)
-Printing vd_id for jbods in iMR raises script error..(DCSG00115555)
-Fix static analysis issues.(DCSG00087283)
-MR FW fails MR_DCMD_CTRL_MFC_DEFAULTS_SET DCMD..(DCSG00316343)
-StorCLI shows "PR excluded VDs" where actually PR is running on online PDs of VD..(DCSG00126725)
-For an OEM, Install of RHEL 8.0 using NVME PD R0 fails. It will error out during the creation of the UEFI partition.(DCSG00077835 (Port Of Defect DCSG00099953))
-supportEPDWithAutoConfigOff supported bit is set as 1.(DCSG00239272 (Port Of Defect DCSG00242939))
-[9460-8i+MR7.12 Patch+X86] Use script to upgrade OEM-made SAS SSD firmware underneath 9460-8i (7.9, 7.11, and 7.12) will fail.(DCSG00124592 (Port Of Defect DCSG00240576))
-[9440-8i + MR7.14 ARM/X86] Auto config RAID0 in HII didnot work as expected.(DCSG00297592 (Port Of Defect DCSG00302394))
-Incorrect slot mapping on UBM backplane with additional DFCs support.(DCSG00077969 (Port Of Defect DCSG00098289))
-Updated the forceUpdate format in PLDM header generation Tool.(DCSG00106563 (Port Of Defect DCSG00107562))
-Asserts from interrupt handlers are not working properly.(DCSG00127828 (Port Of Defect DCSG00137509))
-UNMAP support blocked for an OEM.(DCSG00253426 (Port Of Defect DCSG00257228))
-Expander_FW: Expander FW upgrade or downgrade through OEM test tool is not getting reflected on host applications.(DCSG00171248 (Port Of Defect DCSG00228308))
-In JBOD profile, set VD Write Cache to AWB shows success even though WB Supported is set to NO.(DCSG00113956 (Port Of Defect DCSG00240940))
-Patrol read (and CC) causing OS boot failure on media error correction.(DCSG00080809 (Port Of Defect DCSG00098158)
-A8: Aero MR 7.14: Intermittent issue: Assertion failure in fw\raid\taskman.c at line 361 , when tried to start IO's on SAS SSD 24 expander connect RAID5 RW Windows.(DCSG00139362 (Port Of Defect DCSG00226055))
-Dynamically allocating Ghost Target ID for Recon - Min Changes.(DCSG00248269 (Port Of Defect DCSG00255781))
-MR-7.13: FW - STP passthrough -FW sending ack before completely receiving all MCTP packets..(DCSG00078243 (Port Of Defect DCSG00096017))
-MR 7.14 Beta: OCR did not complete appropriately and assert didn't print properly.(DCSG00212038 (Port Of Defect DCSG00212180))
-(SATA Only) SCSI ATA Passthrough command with set feature command to set the drive in standby_y state sets it to standby_z state..(DCSG00080256 (Port Of Defect DCSG00125866))
-Snapdumps are discarded unnecessarily when flashing a new ROP.(DCSG00118659 (Port Of Defect DCSG00126333))
-[9440-8i+MR7.12/7.13/7.14Beta2+ARM] Controller FW printed Assertion failure in fw\cpu\arm\exceptions.c at line 1006: 0 during fio issue verify(2F) commands to sas.(DCSG00236990 (Port Of Defect DCSG00244897))
-VSES - SES page not set correctly for Front adapters.(DCSG00084525 (Port Of Defect DCSG00093717))
-As part of the Device Add\Removal Event, the enclosure handle passed on by the PL FW to the upper layer is incorrect..(DCSG00298128 (Port Of Defect DCSG00299606))
-After loading aero driver, the VD of the controller cannot be listed.(DCSG00297806 (Port Of Defect DCSG00311838))
-Last LDBBM entry in the list is not cleared after VD Deletion.(DCSG00255330 (Port Of Defect DCSG00257907))
-[9440-8i + MR7.14 + ARM] Controller hit Fatal error when doing drives hard reset test by storelibtest.(DCSG00312453 (Port Of Defect DCSG00318215))
-The last known successful learn time is reported as in Nov 11, 2000.(DCSG00107714 (Port Of Defect DCSG00109132))
-[MR3508+MR7.14 +X86 ] Controller is seen with Fatal error by unknown reason unexpectedly (XH628 V5's 3508 mem.c issue).(DCSG00312708 (Port Of Defect DCSG00316968))
-UNMAP support blocked on an OEM.(DCSG00253426 (Port Of Defect DCSG00257808))
-Elrond Ex2 w/ SAS/SATA incorrect slot numbers after PD move to different slot.(DCSG00069084 (Port Of Defect DCSG00143185))
-iMR FW may crash if disabled in device manager when Microsoft OS boots and lock up.(DCSG00040869 (Port Of Defect DCSG00122394))
-FW faults during driver unload and load process.(DCSG00107743 (Port Of Defect DCSG00134484))
-[Aero/Ventura] Unused phys are managed by VSes in SGPIO BP mode.(DCSG00151021 (Port Of Defect DCSG00216530))
-JBOD drive is converted to Configured Drive after OCR / Reboot.(DCSG00293760 (Port Of Defect DCSG00311206))
-Low risk temporary solution for preventing duplicate target Ids.(DCSG00243849 (Port Of Defect DCSG00249463)
-[Aero/Ventura] Allow the backplane detection state machine to retry the FRU detection.(DCSG00219908 (Port Of Defect DCSG00222975)
-FW faults during driver unload and load process.(DCSG00107743 (Port Of Defect DCSG00228870))
-MR 7.15: Invalid Arguments error seen while setting config file w.r.t JBODs from Storcli..(DCSG00221279 (Port Of Defect DCSG00313427))
-storcli hang intermittently during ocr on i2c based oob platform.(DCSG00171506 (Port Of Defect DCSG00222663))
-SAS9341-8i board encounters 'Previous configuration completely missing at boot' error.(DCSG00067176 (Port Of Defect DCSG00125792)
-MR-7.13: FW - STP passthrough response Firmware does not send some ending bytes..(DCSG00078207 (Port Of Defect DCSG00096019))
-After loading aero driver, the VD of the controller cannot be listed.(DCSG00297806 (Port Of Defect DCSG00309392))
-Expander FW fail to flash FW sometimes in offline mode.(DCSG00217264 (Port Of Defect DCSG00232782)
-MR Ventura FW in JBOD mode still allows security erase by hdparm.(DCSG00104151 (Port Of Defect DCSG00119638)
-iMR boot stuck in creating slot mapping.(DCSG00214223 (Port Of Defect DCSG00221598))
-Direct attached PFA drive - LED is neither ON nor Blinking.(DCSG00111492 (Port Of Defect DCSG00143186))
-FW fault seen during server bootup..(DCSG00345176 (Port Of Defect DCSG00350214))

EnhancementRequests:
-Avenger IOP: Scons scripts update for firmware versioning.(DCSG00102973)
-Implement changes to secureSign signing tool and infrastructure to support mixed list of PublicKeys that are from SCGCQ and DCSG..(DCSG00105430)
-MR API: Change event class for SPDM events.(DCSG00134416)
-API change to add DCMD MR_DCMD_CTRL_LOCK_KEY_SECRET_KEY_APPLY and associated MFI STAT.(DCSG00222915)
-XSD changes Disk labels need to be tied to fixed physical ports in order.(DCSG00141730)
-Added drive push pull tests.(DCSG00253665)
-XSD : Add New field 'singlePortMultipathFeatures' in MPI2_MR_PARAMS_PAGE_0.(DCSG00310657)
-MR PVT API :Update mr_configpage.h file for New fields 'predFailPollDAInterval' and 'predFailPollInterval' in MPI2_MR_PARAMS_PAGE.(DCSG00223408)
-DCSG00265812
-XSD: Add New field 'parityReadCacheBypass' in MPI2_MR_PARAMS_PAGE_0 for PR DCSG00237022.(DCSG00282675)
-MR API: NVME Drive Init Error Report and Repair for Aero/Ventura.(DCSG00071534)
-UpdateVersion tool to change and update version information in ClearCase.(DCSG00072590)
--Implemented change to use FTP instead of UNC for upload / download of unsigned / signed artifacts to workaround firewall issue.(DCSG00129388)
-Add support to build Avenger specific sbr image..(DCSG00101901)
-Define MR_SAS_PHY_CONNECTION.currentSpeed when no devices are connected.(DCSG00071066)
-MFI SMP Port Num API changes.(DCSG00257777)
-FW SAS PVT API : A mechanism to get supported device protocols for each controller form factor.(DCSG00106306)
-MR PVT API :Update mr_configpage.h file for Ruby SED support.(DCSG00278424)
-MR API changes - Support new DCMD for Platform Security SPDM.(DCSG00068355)
-DCSG00315850
-Check in XSD for new security page ExtManPage 49/50/51, Security Page 0/1.(DCSG00082978)
-XSD :Add New fields 'predFailPollDAInterval' and 'predFailPollInterval' in MPI2_MR_PARAMS_PAGE_0.(DCSG00218900)
-Addition of atlas_bst scripts.(DCSG00218726)
-Add new security events.(DCSG00167313)
-Disable custom image build for HBA BST.(DCSG00301780)
-XSD : Need a mechanism to get supported device protocols for each controller form factor.(DCSG00108534)
-Enhance OEMs Dev BST scripts for driver upgrade and downgrade.(DCSG00152322)
-SMART Polling Improvement- API Changes.(DCSG00214352)
-Add noembed support to signtools.(DCSG00314237)
-Add Atlas Behind Aero Setup in Atlas AutoBST.(DCSG00253672)
-MR API: reclassify MR_EVT_CTRL_FW_VALID_SNAPDUMP_AVAILABLE as informational.(DCSG00292323)
-DCSG00306898
-SPDM python script: Support to build Challenge buffer with multiple GET_CERTIFICATE/CERTIFICATE_RESPONSE.(DCSG00226081)
-New MFI Stat for the updated recon behavior.(DCSG00229416)
-XSD change adding SPDM new page ExtManPage 52 for SPDM Version.(DCSG00108514)
-Make updating the embedded key( step 1) of securesign optional..(DCSG00313996)
-Added power cycle tests in Atlas AutoBST.(DCSG00234319)
-MR PVT API: Add singlePortMultipathFeatures to MPI2_MR_PARAMS_PAGE_0.(DCSG00272230)
-Make necessary changes to atlas_bst in valscripts to enable BST for Nvidia stream.(DCSG00237302)
-MR7 API: Add package incompatibility reporting.(DCSG00231443)
-Aero: Integrate SBLIB 2.03.03 into phase 14 mr.(DCSG00299615)
-Updated personality change testing scripts to BST suite.(DCSG00171040)
-Enhance OEMs Dev BST scripts.(DCSG00139069)
-API change to support ISE completion status.(DCSG00065881)
-MegaAPI: Add API Controller Properties and MFCD for ParityReadCacheBypass (PR: DCSG00237022).(DCSG00282676)
-Implement customSign.exe CLI wrapper utility to help customers sign with their private key.(DCSG00234646)
-Preboot Trace Buffer [PTB] for Ventura/Aero - MR API.(DCSG00060713)
-SMART Polling Improvement - API Changes.(DCSG00246317)
-To add return status MFI_STAT_OK_REBOOT_REQUIRED to MR_DCMD_LD_SET_PROPERTIES in mr.h.(DCSG00256271)
-Additional FDE type for Ruby SED support.(DCSG00055878)
-BST script change for single PLDM image removal.(DCSG00134638)
-BST script modification due to change in RO content.(DCSG00265215)
-Set disablePdDegradedMedia in all XSDs.(DCSG00324772)
-Include new field cannotSetMode in MR_AUTO_CFG_PARAMETER structure..(DCSG00072780)
-API changes to expose MR_AUTO_CFG_PARAMETER for NONE mode.(DCSG00151058)
-Update createSasversion.exe to use getCreds.(DCSG00131581)
-Serial mode support for S25FL512S SPI flash part.(DCSG00054211)
-SPILIB 2.0: Add capability to support Winbond Parts with Factory Quad bit Disabled.(DCSG00140236)
-CM Utility to perform automated Deliver and Rebase actions.(DCSG00083856)
-MR API: update field in event structure.(DCSG00093331)
-Preboot Trace Buffer [PTB] for Ventura/Aero - add a switch - MR API.(DCSG00226286)
-SPILIB 2.0: Add support for Block Protect bits configuration.(DCSG00170752)
-SPILIB2: Add support for Macronix MX25U25691G part.(DCSG00068680)
-FW SAS MEGA API:Change MR_EVT_CTRL_FLASH_DISALLOWED_SB_KEY_CHANGE_PENDING event from Info to Warning.(DCSG00086780)
-Atlas BST:- USD integration.(DCSG00234348)
-SPDM python script: Add handling to manage actual certificate certain for Aero with depth=4.(DCSG00315798)
-NVDATA change for Ruby SED support.(DCSG00278286)
-PvtAPI: Add new field 'parityReadCacheBypass' in MPI2_MR_PARAMS_PAGE_0 for PR DCSG00237022.(DCSG00284472)
-MR API changes - Support new Provisional bit in CTRL INFO and new MFI status for Platform Security SPDM.(DCSG00106380)
-Add support for signing MegaRAID Legacy BIOS CU Images (CTLR) images.(DCSG00143847)
-updated BST script to run the 2TB+ drive tests in 90-100 minutes (previously would have taken hours).(DCSG00044714)
-BST setup with Channel HBA + Elrond.(DCSG00234391)
-UCM Action tool feature to support rebase using latest baseline.(DCSG00125616)
-Monitoring Drive Performance and Predictive Failure feature to be removed for certain OEM.(DCSG00082984 (Port Of EnhancementRequest DCSG00099030))
-Snap-dump Enhancement - remove unnecessary duplicate prints.(DCSG00312222 (Port Of EnhancementRequest DCSG00318522))
-Support bit for "cannotExecuteOnce" autoconfig parameter needs to be set as 0 for all configure modes.(DCSG00183076 (Port Of EnhancementRequest DCSG00230640))
-Populate currentSpeed for SAS Phys.(DCSG00072397 (Port Of EnhancementRequest DCSG00312144))
-Need a mechanism to get supported device protocols for each controller form factor.(DCSG00108508 (Port Of EnhancementRequest DCSG00117794))


Version 52.13.0-3211 - Moderate Impact/Low Probability of Occurrence
-------------------
    BIOS: 7.13.00.0
UEFI Driver: 070D0300
HII: 07.13.06.00
MR FW: 5.130.02-3067
    package 52.13.0-3211
Initial Release