Lenovo Storage Host-Bus-Adapter (HBA) Firmware

Change History

Firmware Update for ThinkSystem 810-4P NVMe Switch Card

  
Supported Adapters:  ThinkSystem 810-4P NVMe Switch Card


NOTE TO SERVICE - Reference RETAIN #N/A

Version 00.05.64.00
-------------------
-Updated virtual bridge link width capablity as per respective physical ports capability and MPI EP, enabler EP linkwidth to x4.(DCSG00925580)

Version 00.05.61.00
-------------------
-Removed WA restricting switch P2P bridge MPS to 128B.(DCSG00167433)
-PCI3 Swith: Include ECRC field while calculating TLP length if the TD bit is set.(DCSG00167433)

Version 00.05.55.00
-------------------
(New) Removed WA restricting switch P2P bridge MPS to 128B

Version 00.05.52.00
-------------------
(Fix) Fixed issue NVME drives not detected in BIOS

Version 00.05.51.00 
-------------------
(Fix) Fixed couple of issues related to inband FW update.
(Fix) Fixed defect wrong PLDM sensor count.

Version 00.05.11.00
-------------------
New:
- Add In-Band FW udpate function

Fix:
- Configuration changes of preventing it to be set to ‘compliance polling’ state
- Bug 163203 : The inventory info of NVMe SSDs attached in the switch show incorrect on XCC WebUI during AC power cycle stress

Version 00.05.09.00
-------------------
Fix:
- Bug 148880 - [PA][Rich Server][IEC-Stress] Randomly lost NVME hard drives in OS during AC cycle test. 
- Bug 140977 - [PA_SR250_SDV_COM_Software][UXSP]lnvgy_fw_nvmeswitch_00.05.05.00_anyos_noarch update fail through OOB
- SCGCQ01903751/145044 Lenovo Server: LED Management Not Working if One or More Miramar / Pembroke Ports is Not Connected
- SCGCQ01891748/ 138162 Lenovo Mehlow SR250 system NVMe detection issue with PEX9733


Version 00.05.05.00 - Initial Release
-------------------